• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2511-2517
• /
• 2009

Recently, a FMCW radar is used for the various purposes in the short range detection and tracking of targets. The main advantages of a FMCWradar are the comparative simplicity of implementation and the low peak power transmission characterizing the very low probability of signal interception. Since it uses the frequency modulated continuous wave for transmission and demodulation, the received beat frequency represents the range and Doppler information of targets. Detection and extraction of useful information from targets are performed in this beat frequency domain. Therefore, the resolution and accuracy in the estimation of a beat spectrum are very important. However, using the conventional FFT estimation method, the high resolution spectrum estimation with a low sidelobe level is not possible if the acquisition time is very short in receiving target echoes. This kind of problems deteriorates the detection performance of adjacent targets having the large magnitude differences in return echoes and also degrades the reliability of the extracted information. Therefore, in this paper, the model parameter estimation methods such as autoregressive and eigenvector spectrum estimation are applied to mitigate these problems. Also, simulation results are compared and analyzed for further improvement.

• Defense and Technology
• /
• no.10 s.128
• /
• pp.54-61
• /
• 1989

전장에서의 운용되는 레이다의 운용특성은 매우 까다롭지만 그것의 역할은 비교적 단순하다. 레이다는 어떤 면에서는 보이지 않는 침입자들을 지키는 보초와 같은 존재이다. 그러나 보초병들이 눈에 보이지 않는 적의 움직임에 대해서 알지 못하는데 반해 레이다는 인간의 시야를 넘어선 곳의 정보도 수집할수 있으므로 매우 중요하다. 오늘날의 전장용 레이다는 일반적으로 3~4km 거리에서 사람의 움직임을 감지할수 있다. 어떤 레이다들은 이보다 멀리 (심지어 약 10배까지) 탐지할수 있다고 주장하는데, 이는 이상적인 운용조건에서 사용했을 때를 말한다

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.848-851
• /
• 2012

As many radar systems are simultaneously operated with overlapping frequency bands, interference between systems inevitably occurs. Because interference can degrade radar performance, suppression of interference is a critical issue in radar systems. In this letter, a new interference detection and suppression method using a short-time Fourier transform and an adaptive notch filter is proposed. An experiment is carried out to validate the proposed method and the results demonstrate that the proposed method is suitable for application in real FMCW radars.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.10
• /
• pp.2187-2193
• /
• 2010

A specific radar system can be implemented more easily using the frequency modulated continuous wave comparing with the pulse Doppler radar. It also has the advantage of LPI (low probability of interception) because of the low power and wide bandwidth characteristics. These radars are usually used to cover the short range area and to obtain the high resolution measurements of the target range and velocity information. The transmitted waveform is used in the mixer to demodulate the received echo signal and the resulting beat signal can be obtained. This beat signal is analyzed using the FFT method for the purpose of clutter removal, detection of a target, extraction of velocity and range information, etc. However, for the case of short signal acquisition time, this FFT method can cause the serious leakage effect which disables the detection of weaker echo signals masked by strong side lobes of the clutter. Therefore, in this paper, the weighting window method is analyzed to suppress the strong side lobes while maintaining the proper main lobe width. Also, the results of FFT beat spectrum analysis are shown under various environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.628-631
• /
• 2008

For the remote sensing purpose, radar systems extract the target information, such as the magnitude of reflectivity and the velocity from the spectrum analysis of return echoes through the Doppler filter bank. This conventional spectrum estimation method, FFT(Fast fourier Transform) is widely used in most radar systems. However, the frequency resolution of return echoes can be seriously degraded in fast moving targets because of the short acquisition time. Since the high Doppler frequency resolution is important in the detection and tracking of fast moving targets, it can cause very unsatisfactory results. Therefore, in this paper, the parameter spectrum estimation method called AR(Autoregressive) spectrum estimation, is investigated to overcome these problems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.758-761
• /
• 2009

It is necessary to estimate the Doppler spectrum for each range cell for the extraction of useful information from the return echoes in radar systems used for the remote sending purpose such as detection of moving targets and weather surveillance. The signal amplitude in the given frequency band is the important parameter in the detection and tracking of targets. However, the system performance can be seriously degraded if the efficient removal of the strong clutter is not possible. If the phase noise spreads both the signal and clutter, the clutter removal can be very difficult and the accuracy of frequency estimates is also deteriorated. Therefore, in this paper, the effects of phase noise are analyzed in the estimation of beat frequencies.

• Journal of Advanced Navigation Technology
• /
• v.28 no.2
• /
• pp.178-184
• /
• 2024

The radar installed on an aircraft has various operating modes depending on tactical purposes, allowing for the configuration of search areas according to each mode's operational objectives. active electronically scanned array (AESA) radar emits search beams sequentially according to a predefined search beam grid within the designated search area specified by the pilot to detect targets within it. It is crucial that the radar can stably search the area designated by the pilot for target detection, even as the aircraft's attitude changes. This paper focuses on stabilizing the search pattern in the air-to-air operational mode of aircraft-mounted radar to ensure stable target detection during roll and pitch maneuvers of the aircraft. The paper demonstrates its performance by simulating aircraft maneuvers and targets in a system integration laboratory (SIL) test environment.

• Journal of Advanced Navigation Technology
• /
• v.23 no.2
• /
• pp.134-141
• /
• 2019

Radar systems are divided into the pulse Doppler (PD) radar and the frequency modulated continuous wave (FMCW) radar depending on the transmission waveform. In particular, the PD radar is advantageous for long-range target detection, and the FMCW radar is suitable for short-range target detection. In this paper, we present design and implementation results for a multi-mode radar signal processor (RSP) that can support both PD and FMCW radar systems to detect unmanned aerial vehicles (UAVs) at short distances as well as long distances. The proposed radar signal processor can be implemented based on Altera Cyclone-IV FPGA with 19,623 logic elements, 9,759 registers, and 25,190,400 memory bits. The logic elements and registers of the proposed radar signal processor are reduced by approximately 43% and 30%, respectively, compared to the sum of logic elements and registers of the conventional PD radar and FMCW radar signal processor.

• Defense and Technology
• /
• no.5 s.147
• /
• pp.64-73
• /
• 1991

제2차 세계 대전 이후 일련의 항공 및 지상 위협들이 출현하고 급속히 변천함에 따라, 전자전 분야의 발전을 알기 위해서는 Litton Applied Technology사를 알아야 한다. 위협 및 레이다 경보수신기 분야의 주역으로서 Litton사는 소련제 지대공 유도탄 체계와 MiG전투항공기의 레이다 방사 신호를 탐지하는 최초의 항공탑재 탐지기와 같은 새로운 분야를 개척하였다

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1180-1187
• /
• 2022

As the likelihood of occurrence of the localized microbursts or severe flooding is increased due to the unusual weather changes, it is the very urgent problem to detect these weather hazards with a local weather radar. For a local weather radar of this purpose, it is essential to detect the low altitude and the fast varying weather conditions. Therefore, the very fast update of the weather information and the efficient clutter removal is very important. To achieve this goal, the appropriate method should be applied which does not need the mechanical elevation scanning and has the capability of the efficient clutter removal. Therefore, in this paper, the usefulness of the implementation of elevational filter banks with the spatial FFT algorithm was analyzed and investigated using a simple array antenna. It is shown that the suggested method can be used for both the minimization of the ground clutter and the fast update of weather information.