• KSBB Journal
• /
• v.24 no.4
• /
• pp.367-376
• /
• 2009

In this study, two supercritical extraction systems of different scale, analytical-scale and lab-scale, were employed to investigate the extraction efficiency of canola oil from canola seeds using supercritical carbon dioxide ($SCCO_2$) as an extraction solvent. The effects of various parameters such as extraction temperature ($40{\sim}80^{\circ}C$), pressure (200~500 bar), particle size, and $SCCO_2$ flow direction on the extraction rate and yield were examined in detail. Triglycerides and fatty acids in the extracted canola oil were analyzed quantitatively by high-performance liquid chromatography and gas chromatography. The solubility values of canola oil in $SCCO_2$ could be calculated from the experimental results. Similar extraction yields were obtained from both analytical-scale and lab-scale extraction systems. The extraction rates obtained under solvent ($SCCO_2$ ) upflow conditions were found to be higher than those of solvent downflow extraction. However, the effect of $SCCO_2$ flow direction on the extraction yield was observed to be relatively insignificant.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.336-344
• /
• 2005

Discrete Wavelet Transform(DWT) is the oncoming generation of compression technique that has been selected for MPEG4 and JEPG2000, because it has no blocking effects and efficiently determines frequency property of temporary time. In this paper, we propose an efficient bit-serial architecture for the low-power and low-complexity DWT filter, employing two-channel QMF(Qudracture Mirror Filter) PR(Perfect Reconstruction) lattice filter. The filter consists of four lattices(filter length=8) and we determine the quantization bit for the coefficients by the fixed-length PSNR(peak-signal-to-noise ratio) analysis and propose the architecture of the bit-serial multiplier with the fixed coefficient. The CSD encoding for the coefficients is adopted to minimize the number of non-zero bits, thus reduces the hardware complexity. The proposed folded 1D DWT architecture processes the other resolution levels during idle periods by decimations and its efficient scheduling is proposed. The proposed architecture requires only flip-flops and full-adders. The proposed architecture has been designed and verified by VerilogHDL and synthesized by Synopsys Design Compiler with a Hynix 0.35$\mu$m STD cell library. The maximum operating frequency is 200MHz and the throughput is 175Mbps with 16 clock latencies.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.5
• /
• pp.673-681
• /
• 2011

Among the network information services combined with a number of security technologies and required security policies, Infrastructure as a Service, a hardware plat-form service of Cloud Computing, has been provided since 2011. It is more or less similar to the existing central concentration method services, in terms of the specifications and technical aspects for given hardware category, but it is entirely different from them in that it overcomes the spatial limitations of specific network and targets the public network. Information security technology has also been prospering so that it could ensure the stability of offered hardware plat-forms. As currently supported hardware, Internet Data Center has been provided by virtualizing the previously offered servers and discs (backup discs), but the hardware plat-forms offered are somewhat limited. Meanwhile, the areas of security fields for offered services are confined to the center or include the TCP/IP-based SSL (Secure Sockets Layer) for the public network connected with clients, which shows that microscopic access security policies have been used. Therefore, this study was aimed to provide a realistic security mechanism for realizing defense policy, by expanding service areas into security devices and suggesting Diskless and Stateless security policy based high-speed synchronous network infrastructure.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.295-302
• /
• 2011

Ubiquitous is an information communication environment which peoples could connect on network without being conscious of the network and computer condition at anytime and anywhere. Presently, advanced technology, digital cities and eco-friendly cities using Ubiquitous technology are being focused through out the world. As recent information industry and communication technology have developed remarkably, studies on intelligent structures and structural maintenance methods by combining a general idea of connecting all objects on network by interpolating computers which is called Ubiquitous Computing, and USN(Ubiquitous Sensor Network) are being attempted. In this paper, a basic experiment on penetration of RF(Radio Frequency) sensor nodes using an experimental sample setting concrete and reinforcing bar as variables is studied to estimate the possibility of applying wireless sensor networks in structures. The spring of reinforcing bars, concrete thickness, intensity of radio frequency were set up as variables, transmitting and receiving distance were checked vertically and horizontally. Moreover, Spectrum Analyzer was used for checking the magnitude of the frequency used in order to measure the reduction of radio wave exactly. The radio wave reduction was numerically analyzed, and the influence of the wavelength was analysed as well. As a result, the penetration depth in concrete without reinforcing bars was 45cm, and in reinforced concretes which reinforcing bars placed at spacing of 5cm and 15cm, the penetration depth were 37cm and 45cm each. No influence on radio wave penetration depth were found when the spacing of reinforcing bars in the reinforced concrete structures becomes over 15cm.

• Investigative Magnetic Resonance Imaging
• /
• v.2 no.1
• /
• pp.58-66
• /
• 1998

Purpose : This paper introduces a new three dimensional magnetic Resonance Image classification which is based on Mar kov Random Field-Gibbs Random Field with a line model. Material and Methods : The performance of the Gibbs Classifier over a statistically heterogeneous image can be improved if the local stationary regions in the image are disassociated from each other through the mechanism of the interaction parameters defined at the local neighborhood level. This usually involves the construction of a line model for the image. In this paper we construct a line model for multisignature images based on the differential of the image which can provide an a priori estimate of the unobservable line field, which may lie in regions with significantly different statistics. the line model estimated from the original image data can in turn be used to alter the values of the interaction parameters of the Gibbs Classifier. Results : MRF-Gibbs classifier for volumetric MR images is developed under the condition that the domain of the image classification is $E^{3}$ space rather thatn the conventional $E^{2}$ space. Compared to context free classification, MRF-Gibbs classifier performed better in homogeneous and along boundaries since contextual information is used during the classification. Conclusion : We construct a line model for multisignature, multidimensional image and derive the interaction parameter for determining the energy function of MRF-Gibbs classifier.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.35-44
• /
• 2011

Advances in science and technology have made a lot of changes in our life. Especially, sensors have used in various ways to monitor in real time and analyze the world effectively. Traditional sensor networks, however, have used their own protocols and architecture so it had to be paid a lot of additional cost. In the past 8 years, OGC and ISO have been formulating standards and protocols for the geospatial Sensor Web. Although the OGC SWE initiatives have deployed some components, attempts have been made to access sensor data. All spatial operations had to calculate on the client side because traditional SOS architecture did not consider spatial operation for GeoSensor. As a result, clients have to implement and run spatial operations, and it caused a lot of overload on them and decreased approachableness. In this paper we propose S-SOS for in-situ and moving GeoSensor that extends 52 North SOS and provides spatialFilter and spatialFinder operations. The proposed S-SOS provides an architecture that does not need to edit already deployed SOSs and can add spatial operations as occasion. Additionally we explain how to express the spatial queries and to be used effectively for various location based services.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.127-139
• /
• 2010

The concept of Web 2.0, which means that internet users are producers and also consumers is evolved according to the development of web service technology. In the Web 2.0 space, the enormous amount of web contents are produced using many social web services. Proactive display system supports various types of users's web contents. Unfortunately, private web contents sharing facility is imperfect to date. In this paper, we develop a proactive display application which identifies people, displaying their social contents such as blogs and open cafes through wide display devices or multi-media players in physical spaces. For this, we develop a social contents presentation server where users can register their profiles and information on the social contents to be shared through the developed application. Also, we develop a social contents presentation client that proactively identifies the user in close proximity and displays the user's social contents through an intuitive user interface in physical spaces. In addition, we develop an on-the-spot feedback service which supports posting various types of replies and an on-the-spot scrap service which specifies direct sharing of the contents through the intuitive user interface.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.1
• /
• pp.59-73
• /
• 2003

As a means of overcoming the linguistic barrier between different languages in the Internet, a new sign-language communication system with CG animation techniques has been developed and proposed. In the system, the joint angles of the arms and the hands corresponding to the gesture as a non-verbal communication tool have been considered. The emotional expression, however, could as play also an important role in communicating each other. Especially, a comic expression is more efficient than real facial expression, and the movements of the cheeks and the jaws are more important AU's than those of the eyebrow, eye, mouth etc. Therefore, in this paper, we designed a 3D emotion editor using 2D model, and we extract AU's (called as PAU, here) which play a principal function in expressing emotions. We also proposed a method of generating the universal emotional expression with Avatar models which have different vertex structures. Here, we employed a method of dynamically adjusting the AU movements according to emotional intensities. The proposed system is implemented with Visual C＋＋ and Open Inventor on windows platforms. Experimental results show a possibility that the system could be used as a non-verbal communication means to overcome the linguistic barrier.

• Korean Journal of Optics and Photonics
• /
• v.24 no.4
• /
• pp.176-183
• /
• 2013

In this paper, we report the design, fabrication and characterization of the 3-Dimensional optical receiver for a Laser Detection And Ranging (LADAR) system. The optical receiver is composed of three parts; $16{\pm}16$ Geiger Mode InGaAs Avalanche Photodiode (APD) array device operated at 1560 nm wavelength, Read Out Integrated Circuit (ROIC) measuring the Time-Of-Flight (TOF) of the return signal reflected from target objects, a package and cooler maintaining the proper operational condition of the detector and control electronics. We can confirm that the LADAR system can detect the signal from a target up to 1.2 km away, and it showed low Dark Count Rate (DCR) of less than 140 kHz, and higher than 28%-Photon Detection Efficiency (PDE). This is considered to be the best performance of the $16{\pm}16$ FPA APD optical receiver for a LADAR system.

• Journal of the Korean Chemical Society
• /
• v.54 no.2
• /
• pp.198-207
• /
• 2010

The construction and performance characteristics of doxepin hydrochloride selective electrodes were developed. Three types of electrodes: plastic membrane I, coated wire II, and coated graphite rod III were constructed based on the incorporation of doxepin hydrochloride with ammonium reineckate. The influence of membrane composition, kind of plasticizer, pH of the test solution, soaking time, and foreign ions on the electrodes was investigated. The electrodes showed a Nernstain response with a mean slope of 57.41 ${\pm}$ 0.5, 56.22 ${\pm}$ 0.2 and 52.88 ${\pm}$ 0.7 mV at $25^{\circ}C$ for electrode I, II and III respectively, over Doxepin hydrochloride concentration range from $1{\times}10^{-2}-1{\times}10^{-6}M$, $5{\tims}10^{-2}-1{\times}10^{-6}M$ and $1{\times}10^{-3}-5{\times}10^{-6}M$, and with a detection limit $5.0{\times}10^{-7}M$, $6.3{\times}10^{-7}M$ and $2.5{\times}10^{-6}M$ for electrode I, II and III respectively. The constructed electrodes gave average selective precise and usable within the pH range 3 - 7. Interferences from common cations, alkaloids, sugars, amino acids and drug excipients were reported. The results obtained by the proposed electrodes were also applied successfully to the determination of the drug in pharmaceutical preparations and biological fluids.