• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.227-227
• /
• 2003

흑연(graphite), 석탄(coal), 숯(char), soot(검댕이) 등의 탄소로 이루어진 재료들은 비정질부터 완전한 흑연결정까지 다양한 구조를 나타낸다. 이러한 탄소재료의 구조의 출발물질 뿐 아니라 열처리에 따라 강한 영향을 받는다 이러한 구조는 여러 구조인자에 의해 특성화되는데, 구조인자로는 층간거리 d, 결정립 크기 Lc 그리고 결정립 직경 La이다. 이런 구조 인자의 지식은 흑연화, 탄소화, 가스화 등과 같은 다양한 공정을 이해하는데 매우 중요하다. 많은 연구자들은 XRD, Raman 분광, 고분해능 TEM 등과 같은 여러 기술을 통하여 이러한 구조인자에 대한 해석을 시도하였다. 그 중 XRD는 정량적 분석에 있어서 가장 많이 이용되는 기술이다. XRD 회절피크의 위치로부터 층간거리 d를 구할 수 있으며, 결정립 크기 Lc 및 결정립 직경 La는 피크의 line 퍼짐(반가폭)으로 직접 구할 수 있다. 한편 섬유상 흡착제로 이용되는 등방성 탄소섬유는 이산화탄소 또는 수증기에 의해 쉽게 활성화되어 최고 약 2,500 $m^2$/g의 고 비 표면적을 얻을 수 있다. 이렇게 활성화 후 고 비표면적을 나타내는 이유는 좁은 분포를 나타내는 미세기공의 기공구조 때문에 발생하는 것으로 알려져 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.105-114
• /
• 2018

In this paper, the computer simulations are carried out by using the peridynamic theory model with various conditions including quasi-static loads, dynamic loads and crack propagation, branching crack pattern and isotropic materials, orthotropic materials. Three examples, a plate with a hole under quasi-static loading, a plate with a pre-existing crack under dynamic loading and a lamina with a pre-existing crack under quasi-static loading are analyzed by computational simulations. In order to simulate the quasi-static load, an adaptive dynamic relaxation technique is used. In the orthotropic material analysis, a homogenization method is used considering the strain energy density ratio between the classical continuum mechanics and the peridynamic. As a result, crack propagation and branching cracks are observed successfully and the direction and initiation of the crack are also captured within the peridynamic modeling. In case of applying peridynamic used homogenization method to a relatively complicated orthotropic material, it is also verified by comparing with experimental results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1897-1905
• /
• 2004

In many part of machines or structures that made of bimaterial bonded with two dissimilar materials, most failures occur at their interface. Therefore, the accurate analysis of fracture characteristics and the evaluation of mechanical strength for interfacial crack are essential when we design those structures. In this research, stress and displacement components in the vicinity of stationary interfacial crack tip in the two dissimilar isotropic bimaterials are established. Hereafter, the stress components established in this research can be applied to the photoelastic hybrid method which can be used to analyze the fracture behavior of the two dissimilar isotropic bimaterials.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.59-64
• /
• 2001

The purpose of this work is to investigate the static strength, the stress distribution, and the failure process of quasi-isotropic composite laminates made of two different matrices when loading directions are changed. We carried out static tests of $[0/-60/+60]_s$ and $[+30/-30/90]_s$ laminates. Two types of matrices used are AS4/epoxy and AS4/PEEK. The damage mechanisms of the quasi-isotropic laminate, $[0/-60/+60]_s$, strongly depend on the load direction applied to the laminate.

• Composites Research
• /
• v.12 no.3
• /
• pp.17-25
• /
• 1999

In this paper, we present the analytical study results of buckling behavior of elastically restrained orthotropic plates. In the study the boundary conditions of the plate are simply supported at all four edges and elastically restrained by the elastic medium at opposite two longitudinal edges. The energy method is employed in the solution of the problems in which method the buckling coefficient is calculated from the condition that the work-done by the external forces during buckling is equal to the stored elastic strain energy. The results are presented in the graphical from. The equations derived for the orthotropic plate in this study are compared with existing isotropic ones and identical results were observed.

• Composites Research
• /
• v.23 no.4
• /
• pp.7-13
• /
• 2010

A volume integral equation method (VIEM) is introduced for the solution of elastostatic problems in an unbounded isotropic elastic solids containing interacting multiple anisotropic inclusions subject to remote uniaxial tension. The method is applied to two-dimensional problems involving long parallel cylindrical inclusions. A detailed analysis of stress field at the interface between the matrix and the central inclusion is carried out for square and hexagonal packing of the inclusions. Effects of the number of anisotropic inclusions and various fiber volume fractions on the stress field at the interface between the matrix and the central inclusion are also investigated in detail. The accuracy of the method is validated by solving the single inclusion problem for which solutions are available in the literature.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.114-119
• /
• 1998

등방성 피치계 탄소섬유를 Co$_{2}$gas중에서 등온산화시켜 활성탄소섬유를 제조하였다. 산화된 섬유의 비표면적은 BET장치를 이용하여 측정하였다. Burn-off가 증가하여도 반응속도는 크게 감소하지 않았으며, 80$0^{\circ}C$와 90$0^{\circ}C$에서 산화된 섬유의 비표면적은 40%-60%의 burn-off에서 급격히 증가하다가 60%이상에서 감소하였다. 110$0^{\circ}C$에서 산화된 시편은 40%이상 burn-off되어도 비표면적은 크게 증가하지 않고 60%를 지나서도 계속해서 표면적이 증가하는 현상을 나타내었다. 100$0^{\circ}C$에서 60.4%의 burn-off가 일어난 산화섬유의 비표면적은 3,614$m^2$/g로 가장 큰 값이 얻어졌다. 등방성 탄소섬유는 미세한 흑연결정립들이 무질서한 배향을 하고 있으며, 미세기공벽으로 작용할 수 있는 결정립층이 많기 때문에 활성탄소섬유 제조를 위한 원료로 적합하다고 판단된다.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.12
• /
• pp.88-94
• /
• 2001

The V-notched crack problem in dissimilar materials can be formulated as an eigenvalue problem. The RWCIM(Reciprocal Work Contour Integral Method) is applied to the determination of the eigenvector coefficients associated with eigenvalues for V-notched cracks in pseudo-isotropic and anisotropic dissimilar materials. The RWCIM algorithm is programed by the commercial numerical program, MATHEMATICA. The numerical results obtained are shown that the RWCIM is a useful method for determining the eigenvector coefficients of V-notched cracks in pseudo-isotropic and anisotropic dissimilar materials.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.11
• /
• pp.129-139
• /
• 2000

The problem of eigenvalue and eigenvector is obtained from a V-notched crack in pseudo-isotropic dissimilar materials by the traction free boundary and the perfect bonded interface conditions. The complex stress function is assumed as the two-term William's type. The eigenvalue is solved by a commercial numerical program, MATHEMATICA to discuss stress singularities for V-notched cracks in pseudo-isotropic dissimilar materials. The RWCIM(Reciprocal Work Contour Integral Method) is applied to the determination to eigenvector coefficients associated with eigenvalues. The RWCIM algorithm is also coded by the MATHEMATICA.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.11a
• /
• pp.251-256
• /
• 2000

이방성 재료에서 균열의 성장을 예측하는 것은 실제 구조물의 안전성을 정확하게 해석하기 위한 중요한 문제이다. 이방성 재료 내에서의 균열의 거동은 등방성 재료의 경우와는 다르기 때문에 이방성 재료 내의 균열 해석 문제가 중요한 관심을 끌게 되었다. 비등방성 재료에 대한 지금까지의 연구는 대부분 직선균열의 해석, 직선균열의 초기 전파 각도에 대한 해석에 대하여 이루어져 왔고 곡선 균열에 대한 연구［1-4］는 많이 이루어지지 않았다.(중략)