• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.57-63
• /
• 2007

The systematic method to construct equivalent static load from a given dynamic load is proposed in the present study. Previously reported works to construct equivalent static load were based on ad hoc methods. Due to improper selection of loading position, they may results in unreliable structural design. The present study proposes the employment of primary degrees of freedom for imposing the equivalent static loads. The degrees of freedom are selected by two-level condensation scheme with reliability and efficiency. In several numerical examples, the efficiency and reliability of the proposed scheme is verified by comparison displacement for equivalent static loading and dynamic loading at the critical time.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.165-171
• /
• 2013

Due to the difficulty in considering dynamic load in the view point of a computer resource and computing time, it is common that external load is assumed as ideal static loads. However, structural analysis under static load cannot guarantee the safety of design of the structures under dynamic loadings. Recently, the systematic method to construct equivalent static load from the given dynamic load has been proposed. Previous study has calculated equivalent static load through the optimization procedure under displacement constraints. However, previously reported works to distribute equivalent static load were based on ad-hoc methods. Improper selection of equivalent static loading positions may results in unreliable prediction of structural design. The present study proposes the selection method of the proper locations of equivalent static loads to dynamically applied loads when we consider transient dynamic structural problems. Moreover, it is appropriate to take into account the stress constraint as well as displacement constraint condition for the safety design. But the previously reported studies of equivalent static load design methods considered only displacement constraint conditions but not stress constraint conditions. In the present study we consider not only displacement constraint but also stress constraint conditions. Through a few numerical examples, the efficiency and reliability of proposed scheme is verified by comparison of the equivalent stress between equivalent static loading and dynamic loading.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.125-129
• /
• 2009

본 연구에서는 동강성법을 이용하여 2자유도 진동시스템을 모델링하였다. 등가 모델을 구성한 후 Inertance의 크기에 따라 변화되는 시스템의 특성을 규명하였다. 2자유도 진동 시스템을 단일 모우드 소거에 적용할 경우 해석적인 설계 방법론을 1) 감쇠가 없는 경우 2) 1개의 감쇠기를 갖는 경우로 나누어 제시하였다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.2
• /
• pp.81-86
• /
• 2000

For on-shore structures, dynamic analysis becomes increasingly important as the water depth increases and the structural configuration becoines slenderer. In this study, an estimation method for equivalent three dimensional (30) hydrodynamic coefficients is introduced as a part of beam permutation technique development. The beam pemlUtation technique is being developed for obtaining an equivalent beam to a frame structure in order to reduce the degrees of freedom and thus the analysis time significantly. Two 3D structures are used in order to verify the obtained equivalent 3D hydrodynamic coefficients. Two commercial softwares, ANSYS and SACS, are used for the verification. The results of the present analysis are found to be satisfactory in comparison with those by the two softwares.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.5 no.2
• /
• pp.83-91
• /
• 2001

본 연구에서는 2차원 평면상에서 자유장응답 해석을 위하여 유한요소-경계요소 조합에 의한 수치해석기법을 개발하였다. 전체 계를 외부영역과 내부영역으로 구분하였다. 외부영역은 동적 다층반무한 기본해를 이용한 경계요소로 모형화되고 내부영역은 유한요소로 모형화하여 조합하였다. 다층지반의 외부에서 입사하는 지진에 의한 지진응답해석을 수행하기 위하여 동적기본해를 이용한 자유장응답해석을 수행하였다. 지진응답해석에서는 지반의 전단병형률에 따라 변화하는 비선형특성을 모형화하기 위해 등가선형화기법을 적용하였다. 지진응답해석의 검증에 의하여 해석결과를 상용프로그램의 결과와 비교하였다. 결과적으로 지진응답해석을 효과적으로 수행할 수 있는 수치해석기법을 개발하였고 구조물이 있는 경우로의 확장돠 가능하게 되었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.4
• /
• pp.371-377
• /
• 2009

In this paper, the dynamic characteristic of vibrating system which has translational and rotational degrees of freedom is studied. The moment of inertia of the system is modeled here as the inerter and the equivalent model to the system is proposed using dynamic stiffness method. It is shown that the size of inerter plays a major role to determine the dynamic characteristic of the system. This two degree of freedom system(DOF) is applied as a dynamic vibration absorber(DVA) to the elimination of single peak of main body. The solution for the undamped DVA is presented in analytical form while the damped DVA is designed using fixed point theory. The numerical examples are presented for verifying the methods.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.10 no.1
• /
• pp.33-44
• /
• 1973

Chine형 선체단면 주상체의 자유표면에서의 상하운동에 수반되는 부가질량과 감쇠력을 Ursell-Tasai 방법에 의하여 계산하였다. Chine형에서 구하여진 결과는 같은 선체단면적 계수와 반폭흘수비를 갖는 등가 Lewis형의 결과와 비교하였고 선체단면의 형상이 부가질량 및 감쇠력에 미치는 영향을 고찰하였다. Chine형과 등가 Lewis형 선체단면 주상체에 파고가 일정한 횡파가 입사할 때의 상하운동을 고찰하였다. 이상과 같은 계산 및 고찰을 통하여 다음 결과를 얻었다. 1) 자유표면이 부가질량에 미치는 영향은 chine형이 등가 Lewis형단면보다 큰 값을 갖는다. 2) 선체단면적계수와 반폭흘수비가 같은 경우에 감쇠력의 크기는 Lewis form, single chine, double chine순서이다. 3) 선체단면계수와 반폭흘수비는 상하운동에 가장 큰 영향을 미치는 것으로 생각되며, 선체단면의 기하학적인 변형이 운동에 미치는 영향은 중요한 요소가 되질 못한다. 4) 감쇠력계수와 선체단면계수와의 관계는 간단한 관계를 유지한다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.2
• /
• pp.199-208
• /
• 2010

A friction damper installed at a building shows nonlinear behavior since its stick and slip states are occurred repeatedly depending on the amplitude of external loadings to dissipate input energy. Friction damping is existed for the building with a friction damper. In additionally viscous one is inherently included. Therefore, the building installed in such combined damping is quite involved to find the analytical solution. In this study, first, displacement and acceleration characteristics are identified based on the exact solution for a single-degree-freedom building with a friction damper having both friction and viscous damping. Second, in free vibration, the equivalent viscous damping ratio is obtained by the energy dissipation. Third, numerical analysis is carried out to find response configuration with various friction force ratios. Fourth, corresponding equivalent viscous damping ratio is derived with the finding that the response reaches into steady-state for both friction and viscous damped structure. It is deduced using balance of input external energy and output dissipation energy for steady-state response. Finally, the equivalent viscous damping ratios of free or harmonic vibration are verified through nonlinear analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.2
• /
• pp.111-118
• /
• 2022

An electro-mechanical actuator (EMA) is an actuator that combines an electric motor with a mechanical power transmission elements, and it is suitable for urban air mobility (UAM) in terms of design freedom and maintenance. In this paper, the author presents the research results of the EMA that controls the rotor blade pitch angle of UAM. The actuator is based on an inverted roller screw and controls the blade pitch angle through a two-bar linkage. The dynamic equations for the actuator alone and the blade pitching motion with actuator were derived. For the latter, the equivalent moment of inertia is variable depending on the link angle due to the two-bar linkage. The variations of the equivalent moments of inertia are analyzed and compared in terms of the nut motion and the blade pitch motion. For an example model, the variation of the equivalent moment of inertia of the former is smaller than the latter, so it is judged that the dynamic equations derived from the point of view of the nut motion is suitable for the controller design.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1376-1381
• /
• 2004

Understanding the thermal conductivity and heat transfer processes in superlattice structures is critical for the development of thermoelectric materials and optoelectronic devices based on quantum structures. $Chen^{(1)}$ developed ballistic diffusive equation(BDE) for alternatives of the Boltzmann equation that can be applied to the complex geometrical situation. In this study, a simulation code based on BDE is developed and applied to the 1-dimensional transient heat conduction across a thin film and transient 2-dimensional heat conduction across the film with heater. The obtained results are compared to the results of the $Chen^{(1)}$ and Yang and $Chen^{(1)}$. Finally, steady 2-dimensional heat conduction in the quantum dot superlattice are solved to obtain the equivalent thermal conductivity of the lattice and also compared with the experimental data from $Borca-Tasciuc^{(2)}$.