• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.365-371
• /
• 2008

In this study, beat control method using an equivalent ring model is proposed to control beat period of a slightly asymmetric ring. Slight asymmetry in a ring generates mode pair and the interaction of the mode pair makes beat in vibration and sound. In a ring, as a simplified bell type structure, mode data are measured and an equivalent ring is determined so that the measured mode condition is satisfied. By the finite element analysis on the equivalent ring, changes of mode pair condition are predicted when local mass is attached or the local thickness is decreased. The predicted results are compared with the experimental result and the validity of the proposed method is verified.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.12
• /
• pp.49-57
• /
• 2001

In this paper, equivalent circuit model and novel model parameter extraction method of a silicon(Si) substrate are presented. Substrate coupling through Si-substrate is quantitatively investigated by analyzing equivalent circuit with operating frequency and characteristic frequencies (i.e., pole and zero frequency) of a system. For the experimental verification of the equivalent circuit and parameter extraction method, test patterns are designed and fabricated in standard CMOS technology with various isolation distances, substrate resistivity, and guard-ring structures. Then, these are measured in l00MHz-20GHz frequency range by using vector network analyzer. It is shown that the equivalent-circuit-based HSPICE simulation results using extracted parameters have excellent agreement with the experimental results. Thus, the proposed equivalent circuit and parameter extraction methodology can be usefully employed in mixed-signal circuit design and verification of a circuit performance.

• Journal of the Korean Geographical Society
• /
• v.47 no.5
• /
• pp.718-734
• /
• 2012

This study investigates the interference of politics of regional cleavage in the redistricting for national assembly election and its effects on gerrymandering and malapportionment. Since the Constitutional Assembly election, the argument about gerrymandering and malapportionment continues and the single-member election district with simple plurality system in Korea has aggravated the problem of cleavage and unfairness. Especially, redistrictings for national assembly election in 2008 and 2012 are suspected of gerrymandering by Saenuri party and Democratic United party. Yeongnam region where Saenuri party is dominant and Honam region where Democratic United party is, are over-represented compared to population, while the districts in Gyeonggi-do are under-represented and the need for increasing the number of districts has been ignored. These redistrictings might come from unfair and collusive interference of politics of regional cleavage, and consequently malapportionment has been brought about.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.653-658
• /
• 2015

In this paper, the Square Split Ring Resonator(: SRR) of Defected Ground Structure(: DGS), applicable to MMIC(: Monolithic Microwave Integrated Circuit) design, is proposed. The mathematical method to solve the equivalent parameter of the resonator from the measured results of resonator is introduced in this paper. To verify the method, SRR-DGS resonator with 2.95 GHz center frequency is fabricated, for measuring characteristics and calculating the equivalent parameter. The result from this process is compared with the data of the ADS simulation, and as a result both were identical.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.2
• /
• pp.184-192
• /
• 2019

Compared to 31-mode rings, 33-mode rings are highly utilized as wide bandwidth underwater acoustic transducers because the electro-mechanical coupling and piezoelectric constant d are high. On the other hand, the 31-mode ring is an axial symmetry structure, so it is possible to model it as a simple two-dimensional asymmetrical model for numerical analysis, but the 33-mode ring requires a three-dimensional numerical analysis. That is, a lot of computing resources and computation time are required. In this study, the effective material properties of an equivalent 31-mode ring were derived to simulate the electro-mechano-acoustical responses of the 33-mode ring transducer. Using the effective material properties derived from this study, a numerical analysis of rings in vacuum, air backed rings in water, and FFR (Free Flooded Ring) transducers were performed to compare the responses of 33-mode rings.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2010.10a
• /
• pp.155-156
• /
• 2010

포텐셜 자료의 해석을 위해서는 상하향 연속을 이용하는 경우가 많다. 빠른 계산과 다양한 적용성 때문에 FFT(Fast Fourier Transform)을 이용한 상하향 연속을 주로 사용하는데, FFT를 적용하기 위해서는 격자망 형태로 얻어진 자료가 필요하다. 현장 중자력 자료는 보통 산발적(scattered)으로 얻어지기 때문에 FFT를 수행하기 위하여 격자망 자료로 변환하는 격자화(gridding) 과정에서 계산적인 오차가 발생한다. 반면 등가샘(equivalent source) 방법은 주어진 자료에 맞는 가상의 샘(source)들의 조합을 생성하고, 구해진 샘들의 조합으로부터 임의의 영역에서 필드값을 구하므로 격자화 과정이 필요없다. 이 연구의 목적은 등가샘 방법의 필요성을 보이고 여러 가지 등가샘 알고리즘을 비교분석하고 현장 자료에 사용하기 적합한 등가샘 방법들을 보여주는데 있다. 그림 1에서 보듯이 FFT를 사용한 상향 연속은 FFT 이론상 전 영역에 대한 적분이 필요하나 현장에서는 일부분의 자료만을 획득할 수 있으므로 상향 연속에서 정확한 자력값으로 연속을 수행하는 것은 불가능하다. 그러나 주어진 값들로 등가샘을 구성하여 상향 연속을수행한 결과는 상대적으로 보다 정확한 해에 도달한다. 또한 등가샘 방법을 이용한 연속의 장점은 그림 2와 같이 얻어진 자료의 높이가 서로 다른 자료를 주어진 높이로 연속을수행할 수 있다는 점이다. 또한 한번 등가샘들을 구성하면 이를 이용하여 격자화, 필터링 등을 해석을 위한 기초 자료처리에 적용할 수 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.537-540
• /
• 1987

항공기가 평형상태로 비행하는 도중 돌풍과 같은 외부교란을 만난 교란상태운동은 선형화된 미분방정식으로 표현되며 비교적 짧은 비행시간동안의 비행은 선형시 불변계가 된다. 돌풍은 Gauss-Markov확률과정으로 모델링 되며, 항공기가 돌풍을 만난 교란상태운동은 시스템론적으로 보면 백색잡음이 성형필터를 거쳐 계에 입력되는 것과 같다. 초기의 설계방법은 고전적인 주파수영역에서의 해석방법을 사용하였으나 1960년대에 최적제어이론이 도입되면서 평가함수를 사용하여 원하는 비행특성을 얻는 방법을 사용하게 되었다. 그 후 계에 입력되는 외란과 측정시의 잡음으로 인한 불확실한 측정량으로부터 최적상태변수의 추정을 위해 필터링이론을 도입한 확률제어이론을 적용하여 자동조종장치를 설계하게 되었다. 이때까지는 연속제어계로 설계되었으며 그 후 측정신호를 샘플링하여 연속제어계와 등가의 이산제어계를 사용한 자동조종장치가 등장하였으며 이 경우 설계기법으로는 연속제어계를 사용하고 실현시킬 때는 디지털컴퓨터를 사용하였다. 이는 제어하는 동안 계의 계수와 제어법칙을 바꾸어 줄 수 있는 이산제어계의 장점을 이용하지 못하므로 처음부터 계를 등가의 이산계로 보고 제어계를 설계하는 방법이 도입되었다. 이 때 샘플링간격의 결정과 Quantization 영향이 설계시 고려되어야 한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1218-1223
• /
• 2007

In this study, we experimentally investigate the equivalent ring theory for a slightly asymmetric ring. The slightly asymmetric ring has mode pair and frequency pair due to the small asymmetry and this mode pair generates beat in vibration and sound. In this paper, a slightly asymmetric ring is modeled as the equivalent ring, i.e., the assemblage of a symmetric ring and imperfect point masses. The equivalent ring has the same mode pair condition as that of the original asymmetric ring. Effect of the additional mass attachment is investigated by the equivalent ring theory and the result is compared with those of the measurement and the finite element analysis. It is confirmed that the original ring and the equivalent ring show the same change in frequency and mode under the various additional imperfection mass conditions. The equivalent ring theory explains how the asymmetric elements influence the mode characteristics and provides useful information to tune the beat property.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.2
• /
• pp.181-188
• /
• 2004

The objective of this paper is to numerically examine the mechanical behavior of the swaged power steering(PS) hose subject to internal pressure. PS hose experiences a large internal pressure change in operating, so it's material part has to resist a cyclic expansion and compression without causing oil leakage. This cyclic pressure is intimately associated with fatigue failure of PS hose. In this study, we compare two types of PS hose. The numerical investigation is composed of three steps; swaging analysis, low and high pressure analyses. The comparative numerical results provide the basic data for the optimal PS design.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1434-1439
• /
• 2012

Vehicle is a dynamic system combined with various parameters. Dynamic characteristics of a vehicle can vary with the change of these parameters. To investigate the effect of the design parameter on vehicle handling performance the sensitivity analysis is carried out by the numerical method. The vehicle model is described by equivalent cornering stiffness that considers parameters of suspension and steering system. As the analysis results show the effect on the static and dynamic characteristics of the vehicle system, the sensitivity analysis can be used for synthesis of the design parameters to improve the vehicle handling characteristics at the design stage as well as during the vehicle test under development.