• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.533-536
• /
• 2005

In this paper, a new drive system(SHS) for hybrid electric vehicle is proposed. As dual rotor hybrid electric vehicle using planetary gearsets, the SHS has the advantages of both series and parallel systems. The output speed and torque of SHS can be determined at specific point regardless of the engine's operating point. When the size of generator which is used in SHS is same as in THS, the SHS has more activities of engine control due to the ability that is operated in lower speed range. To maximize the performance of system, we carried out optimization for the three parameters that are engine, motorl and motor2. As the result of the optimization, we confirmed the SHS is more preferable to THS in fuel consumption and acceleration area.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.97-100
• /
• 2006

Accelerating ability is one of the most important performance of the vehicle. Unlike conventional internal combustion vehicles and power-assist hybrid vehicles, the maximized acceleration of dual mode hybrid vehicles is not simply. achieved by maximizing engine or motor torque Because of the dynamic stability of planetary gear, speeds and torques control of engine, motor 1 and motor 2 is essential and according to control value, acceleration performance is changed There are two control values which are velocity and torque for each component totalling six. These six values can be variables for an objective function. However, because three velocity variables can be regarded as only one variable speed ratio and the remaining three torque variables can be solved analytically, without complicated numerical algorithm the solution for the objective function can be obtained. This optimized solution shows the best performance possible to the specified dual mode system.

• Journal of Welding and Joining
• /
• v.31 no.4
• /
• pp.23-27
• /
• 2013

Laser heat source was used for automotive interior and exterior parts to reduce weights. Typically, 900's nm wavelength of laser has been widely used for polymer joining, however, the transmittance of the laser beam thorough clear polymers such as PMMA or PC has been an issue to overcome. To solve this issue, 1,940nm laser was applied on the clear polymer for the better absorption and 900nm laser beam was used for main laser for the joining. Conventional Gaussian or Elliptical heat source approximation has limitation in polymer which had deeper skin depth where major laser beam absorbs. To accurately simulate the physical laser beam absorption and joining optical properties were experimentally measured for the computer FEM simulation. The simulation results showed close correlation between theoretical and experimental results. The developed laser process is expected to increase productivity and gap closing which can cause failure of joining in laser material processing.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.1
• /
• pp.54-60
• /
• 2006

A power limiting algorithm is proposed for stable operation of grid-connected inverter in case of grid voltage unbalance considering the operation limit of inverter. During the voltage unbalance the control performance of Inverter. is degraded and the output power contains 120Hz ripple due to the negative sequence of voltage. In this paper, conventional dual sequence current controller is implemented to solve these problems using separated control of positive and negative sequence. Especially the maximum power limit which guarantees the maximum rated current of the inverter is automatically calculated as the instant grid voltage changes. As soon as the voltage recovers the proposed algorithm can return to the normal power control mode accomplishing low voltage ride through. Proposed algorithm is verifed using PSCAD/EMTDC simulations and tested experimentally at 4.4kW wind turbine simulator set-up.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.144-144
• /
• 2012

스퍼터링 기술은 타겟 사용 효율 및 증착률 향상 개념에서의 소스 특성향상과, 증착 기판으로 이동하는 스퍼터링 입자량 및 이온화율 제어를 통한 코팅 박막의 특성향상 등 크게 두 축을 중심으로 발전되어 왔다. 특히 소스 특성 향상 관점에서 고진공에서의 스퍼터링 기술, 듀얼 마그네크론 스퍼터링 및 무빙 마그네트론 스퍼터링 기술 및 원통형 스퍼터링 기술이 개발되어왔으며, 코팅 박막의 특성 향상과 관련하여서는 스퍼터링 방전 내 플라즈마의 밀도의 증대 및 기판 입사 입자의 에너지 제어를 통한 박막의 치밀도 향상 연구가 많이 이루어져, UBM 또는 ICP 결합 스퍼터링 및 Arc-스퍼터링 혼합공정이 연구되어 왔다. 박막 증착에서 박막의 물성을 조절하는 주요인자는, 기판에 입사하는 입자의 에너지로, 그 조절 범위가 좁고 넓음에 따라 활용 가능한 코팅 공정의 window가 설정된다. 지난 15년간 증착박막의 물성 향상을 위하여 스퍼터링 소스의 제어 관점이 아닌 전원적 관점에서 스퍼터된 입자의 에너지 제어를 MF(kHz), Pulse 전원 사용을 통해 이루어져 왔고, 특히 High Impulse Pulse를 이용한 HiPIMS 기법이 연구개발과 시장의 이해가 잘 어울려져 많은 발전을 이루고 있다. HiPIMS 공정은 박막의 물성을 제어하는 관점을 스퍼터링에 사용되는 보조 가스인 Ar 이온에 의존하지 않고, 직접 스퍼터된 입자의 이온화를 증대시키고, 이 이온화된 입자를 활용하여 증착 박막의 치밀성 및 반응성을 증대시켜, 박막특성을 제어하는 기술이다. HiPIMS의 경우, 초기 개발 당시에는 고에너지, 고이온화의 금속 이온을 대량 생성할 수 있다는 이론적 배경에서 연구되었다. 그러나 연구 개발이 진행되면서, 박막의 물성과 증착률 등 상반된 특성이 나타나면서 이에 대한 전원장치의 개량이나 스퍼터링 소스의 개선 등 다양한 개발 연구들이 요구되고 있다. 재료연구소에서는 스퍼터링 기술에서 가장 문제가 되고 있는 타겟 사용효율화 관점 및 스퍼트된 입자의 이온화률 증대에 대한 두 가지 문제를 동시에 해결할 수 있는 방안으로 고밀도 플라즈마를 이용한 스퍼터링 기술을 개발하고 있다. 본 발표에서는 이러한 HiPIMS의 연구 개발 동향과 고밀도 플라즈마를 이용한 스퍼터링 기술에 대한 연구 동향을 발표하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3188-3193
• /
• 2012

It is important to search a pitch for vocoder. The major drawback to vocoders is their large computational requirements in searching a pitch and a codebook. In this paper, a simple method is proposed to improve the pitch searching process in the pitch filter almost without degradation of quality. The period of speech signal is emphasized by using Dual Pulse technique, the same type of autocorrelation method, in pitch search. Sometimes the incorrect pitch can be obtained by halving, doubling and trifling, To solve it, before searching a pitch, we estimate energy rate in a frame and compensate envelop of signal with it. By using the proposed algorithm in pitch search, its required computation are reduced and searching pitch is improved.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.1
• /
• pp.85-92
• /
• 2017

Recently, electric propulsion systems are used for unmanned surface vehicle, fish finder boat, etc. Some of these propulsion systems can be constructed of two electric motors and propellers for advanced impellent force. In this case, the speed difference generated between two propellers, namely, the synchronous error has a bad influence on the energy efficiency and course error. In this study, a synchronous control system is designed to restrain synchronous error caused by disturbance and mismatched dynamic characteristics. The control system is composed of the reference model, pre-filters, speed controllers, and synchronous controllers. The reference model is used for calculating the decoupled synchronous error and control input for each propulsion system. The pre-filters and speed controllers are designed in order that the propulsion system may follow the reference signal without overshoot and input saturation. And the synchronous controllers are designed from the viewpoint of stable and quick synchronization through root locus mothed approach. Finally, the simulation results show that the designed control system is effective for the disturbance.

• Journal of the Institute of Convergence Signal Processing
• /
• v.25 no.1
• /
• pp.46-51
• /
• 2024

Drone was first used for military purposes but as the range of use has recently expanded. It is being widely used in various industrial fields such as agriculture, service, logistics, and leisure. Lithium polymer batteries are lightweight and highly efficient, so they are mainly used as power supplies for drones. Accordingly, the need for lightweight and high energy density lithium polymer batteries has increased in order to supply stable power to drone. However, lithium polymer batteries can lead to ignition and explosion due to overcharging, short circuit, etc., so they must be used with a protective circuit installed. The protection circuit consists of a protection IC that monitors the voltage of the lithium polymer battery and a dual N-channel MOSFET that acts as a switch in case of overcharge and overdischarge. Therefore, this paper was implemented in one package form using a battery protection IC and a MOSFET semiconductor die chip serving as a switch. When implemented as a one chip package IC, at least 67% of savings compared to existing parts can be achieved.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.83-89
• /
• 2006

This paper describes the design of I/Q channel 12bit Digital-to-Analog Converter(DAC) which shows the conversion rate of 120MHz and the power supply of 3.3V with 0.35um CMOS n-well 1-poly 4-metal process for advanced wireless transceiver. The proposed DAC utilizes 4-bit thermometer decoder with 3 stages for minimum glitch energy and linearity error. Also, using a optimized 4bit thermometer decoder for the decrement of the chip area. Integral nonlinearity(INL) of ${\pm}1.6LSB$ and differential nonlinearity(DNL) of ${\pm}1.3LSB$ have been measured. In single tone test, the ENOB of the proposed 12bit DAC is 10.5bit and SFDR of 73dB(@ Fs=120MHz, Fin=1MHz) is measured, respectively. Dual-tone test SFDR is 61 dB (@ Fs=100MHz, Fin=1.5MHz, 2MHz). Glitch energy of 31 pV.s is measured. The converter consumes a total of 105mW from 3.3-V power supply.