• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.1
• /
• pp.38-43
• /
• 2014

An experimental method based on flexural wave propagation is proposed for identification of structural damage in rail fastening systems. The vibration of a rail clamped and supported by viscoelastic pads is significantly influenced by dynamic support properties. Formation of a defect in the rail fastening system induces changes in the flexural wave propagation characteristics owning to the discontinuity in the structural properties. In this study, frequency-dependent support stiffness was measured to monitor this change by a transfer function method. The sensitivity of wave propagation on the defect was measured from the potential energy stored in a continuously supported rail. Further, the damage index was defined as a correlation coefficient between the change in the support stiffness and the sensitivity. The defect location was identified from the calculated damage index.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.5
• /
• pp.79-89
• /
• 1984

In this paper we present development of microprocessor-based 8-channel statistical multiplexer (SMUX). The hardware design includes one Z-80A CPU board with the clock rate of 4 MHz, one 16 Kbyte ROM board for program storage, one 16 Kbyte dynamic RAM board and three I/O boards, all connected through an S-100 compatible tristate bus. The SMUX can presently multiplex 8 channels with data rates ranging 50 bps to 9600 bps, but can be reduced to accommodate 4 channels by having a slight modification of software and removing one terminal I/O board. The system specifications meet CCITT recommendations X.25 link level, V.24, V.28, X.3 and X.28. Significant features of the SMUX are its capability of handling 4 input codes (ASCII, EBCDIC, Baudot, Transcode), the use of a dynamic buffer management algorithm, a diagnostic facility, and the efficient use of a single CPU for all system operation. Throughout the paper, detailed explanations are given as to how the hardware and software of the SMUX system have been designed efficiently.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.3
• /
• pp.64-72
• /
• 2003

Comparing with transmission networks, the faults in distribution networks more often occurs because of the complicated structure and the adjacency to customers. Moreover the faults give direct damage to customers. So fault diagnosis and blackout restoration in distribution networks are very important elements to reduce the damage of customers and to maintain the stability. The restoration problem of distribution networks is subject to time. Minimizing the switching numbers in restoration process is the crucial element. In other words. the best restoration is to restore all blackout area through just one switching, if not the restoration has to be accomplished through several switching. This paper proposes the efficient restoration system in distribution networks to minimize the switching numbers. The proposed system uses the dynamic division method of hierarchical structure which consists of heuristic searching method and meta algorithm. The proposed system is applied to the sample networks, and the results showed a promising possibility.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.294-300
• /
• 2013

The purpose of this study was to analyse the effects of yoga exercise on balance ability and gait velocity in stroke patients. Subjects were categorized in to a control group and yoga program group with 9 for each group. Yoga program was conducted for 60minute for 8weeks, three times a week. For the purposes, the study measured Stability Index(SI, postural sway) and Weight Distribution Index(WDI) using Tetrax, Functional Reach Test(FRT), Dynamic Gait index(DGI) and 10 meter walking test. At pre- and post-exercise after appling the yoga exercise, the data was analyzed. Yoga exercise group's SI and WDI were decreased, FRT and DGI were increased in comparison with control group. But 10 meter walking test was no significance. It suggests that the yoga exercise could promote recovery from balance disorder after stroke.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.375-384
• /
• 2023

Most Hepatic hemangiomas are asymptomatic and small in size, making them difficult to find by pathological examination. Therefore, radiological diagnosis is essential for the early finding and diagnosis of Hepatic hemangioma. Three-phase method using contrast medium in computed tomography, T1, T2-weighted imaging in magnetic resonance imaging, dynamic magnetic resonance imaging using contrast medium, echo planar imaging method, diffusion-weighted imaging method, blood pool scan using ^99mTc-labeled red blood cells in nuclear medicine, we looked at the color doppler method In ultrasound, and it is important to accurately understand the imaging findings of hepatic hemangioma and perform the examination in order to make an accurate diagnosis. most hepatic hemangioma are benign tumors, care should be taken not to confuse them with malignant tumors such as hepatocellular carcinoma to prevent unnecessary procedures. Therefore, in order to make an accurate diagnosis, it is important to accurately understand the imaging findings of hemangioma and perform the examination.

• Journal of radiological science and technology
• /
• v.29 no.1
• /
• pp.1-6
• /
• 2006

Purpose: Renal stones are common and typically arise within the collecting system. The renal sinus are contains the collection system, the renal vessels, lymphatcs, fat, and fibrous tissue. Because of the compression of all the large echoes in signal processing, the echo from the renal stone generally cannot be distinguished from large echoes emanating from normal structures of the renal sinus. Use of ultrasonography has been difficult for detecting small renal stone without posterior shadowing and chemical composition of stone. The aim of study was measuring for posterior acoustic shadowing to a stone for various scan parameter and it examines a help in renal stone diagnosis. Material & Methods: The stone was place on sponge examined in a water bath with a 3.5MHz or 7.5MHz transducer(LOGIQ 400, USA). First, tested a variety of gain. Second, tested a variety of dynamic range. Third, tested a variety of focal zone. Fourth, measuring of the echo level for low and high frequency for depth. Results: 1) Average echo level was 98 for low total gain(10 dB) and was 142 for high total gain(40 dB). Posterior acoustic shadowing of renal stone was clear for low gain. 2) Average echo level was 129 for low dynamic range(42 dB) and was 101 for high dynamic range(72 dB). Posterior acoustic shadowing of renal stone was clear for high dynamic range. 3) When stone is in focal zone of transducer, definite posterior acoustic shadow is identified. 4) Stone was clear appeared for high frequency(7.5 MHz) than low frequency(3.5 MHz) and it is not distorted. Conclusion: The demonstration of an posterior acoustic shadow of renal stone dependents on several technical factors such as gain, dynamic range, focus, and frequency. This various factors are a help in renal stone diagnosis.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.75-79
• /
• 2019

Purpose Cadmium-zinc-telluride (CZT) camera with semiconductor detector is capable of dynamic myocardial perfusion SPECT for coronary flow reserve (CFR). Image acquisition with the heart positioned within 2 cm in the center of the quality field of view (QFOV) is recommended because the CZT detector based on focused multi-pinhole collimators and is stationary gantry without rotation. The aim of this study was to investigate the optimal method for measuring position of the heart within the center of the QFOV when performing dynamic myocardial perfusion SPECT with the Discovery NM 530c camera. Materials and Methods From June to September 2018, 45 patients were subject to dynamic myocardial perfusion SPECT with D530c. For accurate heart positioning, the patient's heart was scanned with a mobile ultrasound and marked at the top of the probe where the mitral valve (MV) was visible in the parasternal long-axis view (PLAX). And, the marked point on the patient's body matched with the reference point indicated CZT detector in dynamic stress. The heart was positioned to be in the center of the QFOV in rest. The coordinates of dynamic stress and rest were compared statistically. Results The coordinates of the dynamic stress using mobile ultrasound and those taken of the rest were recorded for comparative analysis with regard to the position of the couch and analyzed. There were no statistically significant differences in the coordinates of Table in & out, Table up & down, and Detector in & out (P > 0.05). The difference in distance between the 2 groups was measured at $0.25{\pm}1.00$, $0.24{\pm}0.96$ and $0.25{\pm}0.82cm$ respectively, with no difference greater than 2 cm in all categories. Conclusion The position of the heart taken using mobile ultrasound did not differ significantly from that of the center of the QFOV. Therefore, The use of mobile ultrasound in dynamic stress will help to select the correct position of the heart, which will be effective in clinical diagnosis by minimizing the image quality improvement and the patient's exposure to radiation.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.1 s.53
• /
• pp.205-213
• /
• 2009

This study was planned to develop monitoring system of cable force to resolve cable force of cable-stayed bridge efficiently in a long-term plan. In the proposed monitoring system, firstly data are sampled from real-time acceleration record, secondly these sampled data are frequency analyzed by using the FFT(Fast Fourier Transform) algorism and lastly the analyzed results are averaged and generalized. For evaluating the applicability of this monitoring system, field loading test has performed in real cable-stayed bridge. In comparison with cable force by field manual calculation and cable force of monitoring system by semi-automatic calculation, the difference of calculated cable forces has within 1% error range and it is acceptable range. Additionally within negligible 5% error range of difference has occur between field manual calculation and monitoring system by automatic calculation. so monitoring system in this study has been verified to be reliable.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.3
• /
• pp.56-64
• /
• 2013

The wind resistant capacity of bridges with a span of less than 200m is typically evaluated by Wind Resistant Design Manual for Highway Bridges in Japan. Also, the first vertical frequency plays an important role in the evaluation of their aerodynamic performance. An unexpected vortex-induced vibration of Nielsen arch bridge with span of 183m designed by this manual has been measured by monitoring system during typhoon. The amplitude of vibrations was about 2 times than the allowable vibration displacement. This paper presents the feature of vortex-induced vibration of this Nielsen arch bridge based on measured wind velocity, wind direction, and responses at midspan of main girder. From the result of FFT, the $1^{st}$ mode shape of the bridge is antisymmetric and the $2^{nd}$ is symmetric. Also, the dominant vibration of the bridge is the $2^{nd}$ vertical mode. According to these results, the $2^{nd}$ vertical vibration mode of this Nielsen arch bridge is prior to the first for the estimation of wind resistance capacity.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.4
• /
• pp.227-234
• /
• 2005

In this paper, a smart wireless MEMS-based accelerometer(MA) system has been designed and experimented for smart monitoring system of civil structures. Various performance and experimental tests have been carried out to evaluate whether this system is suitable for monitoring system of civil structures. First, we examined its sensitivity, resolution, and noise, specifically to evaluate the performance of the smart wireless MA system. The results of experiments enabled us to estimate performance of the MA in SWMAS in comparison to the value of data sheet from MA. Second, characteristics of model structure were analyzed by the ambient vibration test based on the NExT combined with ERA. Finally, this analysis was compared to the one that was made by FE results, and the comparison proved that a smart wireless MA system was fitted in smart monitoring system effectively.