• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.2
• /
• pp.142-149
• /
• 2004

PMLSM(Permanent Magnet linear Synchronous Motor) has widely applied to industrial automations, machine tools and semiconductor equipments due to the merit on the reduction of noise, vibration and the superior dynamic characteristics in comparison to the conventional method, which uses mechanical transfer equipments. Especially, in the case of applying to Z-axis operation structure, control system needs the method of an initial angle setting and the improvement of up/down operation characteristics. This paper proposes an initial angle setting algorithm and a variable gain schedule using real speed and moving direction to improve up/down operation characteristics. The effectiveness of proposed algorithms Is demonstrated by comparing to a conventional gain system via 4-point absolute positions profile with each velocity, acceleration and deceleration.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.4
• /
• pp.77-85
• /
• 2019

Death accidents rates in construction industry is increasing high recently. Such a phenomenon may be seen as a limitation of current management methods and legal actions. Therefore, purpose of this study was to find priorities of construction Workers safety activities related to motivational factors and to check perception differences between construction workers and construction engineers and to find a main factor of workers attitude, behavioral causes and find a way to reduce the accidents causing in construction industry. For the research, we did a survey with construction workers and construction engineers asking about 3 top motivators 'economic, environmental, safety, cultural, and administrative factors' in 21 details. According to the survey, the biggest difference between construction workers and construction engineers was about a working environment and safety cultural factors. Also, workers and engineers were both positive about safety incentive. Based on the results of this study, safety accidents will be reduced through worker-oriented management.

• Information Systems Review
• /
• v.10 no.3
• /
• pp.257-287
• /
• 2008

Grounded in the prior literatures on acceptance and diffusion of IT and innovation in the level of organization research, 3 major constructional factors such as Motivation, IT resistance, and IT change management were investigated to suggest propositions from 15 multi-cases of PLM from 6 different companies in Automotive OEMs and suppliers, and we posited that the diffusion is continued only when motivation is stronger enough to overcome IT resistance as a fundamental finding and basis of this research on PLM acceptance and diffusion. The Motivation was found to be initiated and categorized from three different factors such as environmental factors, organizational factors, and technological factors, providing key propositions for further research: (1)The Automotive suppliers, contrary to OEM, are affected more by the demand of inter-connectivity as an environmental factor, while the other factors are similarly influencing to them, (2)The big organizations are influenced more by the champion, while the small organizations get influenced more by leader. (3)When the trend, inter-connectivity and complexity get stronger, the motivation gets more strongly influenced by the perceived benefit in the technological context. Regarding Change management we suggests IT change management is supportive to overcome IT resistance and also to enforce Motivation, and the critical mass exists differently according to the market maturity adopted, and more market matured technology has lower critical mass, implies less requirement of IT change management than less market matured technology.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.27-37
• /
• 1983

A method of dynamic analysis is developed for torsional free vibrations of elliptical-box girder type or stiffening truss system suspension bridge. In this study, the method based on a finite element technique using a digital computer, is illustrated by two numerical examples, the Namhae Bridge which is located in Kyungsang nam-do opened on June, 1973, and the Mt. Chunma Bridge is simple span pedestrian's suspension bridge with lateral bracing system in Mt. Chunma, Kyungki-do, are used. In general, dynamic modes of complex suspension bridges are three-dimensional in form, i.e., coupling between vertical and torsional motions. However, introduced that amplitudes of oscillation are infinitesimal for coincidence with the purpose of it's use, thereupon, the torsional vibration analyses are treated without coupling terms. A sufficient number of natural frequencies and mode shapes for torsional free vibration are presented in this paper. In the case of Mt. Chunma Bridge, the natural frequencies and periods are computed with and without reinforcement, respectively, and compared their discrepancies. The influence of the auxiliary reinforcing cables is prevailing in the first few modes, namely, 1st and 2nd in symmetric and 1st, 2nd and 3rd in antisymmetric vibration, and conspicuous in the symmetric compared with the antisymmetric motion, but in the higher modes, this kind of simple accessory elucidates rether converse effects. In the Namhae Bridge, the results are compared with the Manual's obtained by wind tunnel test. It reveals commendable agreement.

• Journal of Korean Society of Steel Construction
• /
• v.24 no.1
• /
• pp.1-11
• /
• 2012

To overcome the limitations of current evaluation procedures for floor vibration under crowd loading, two kinds of uncertainties associated with individual time lag differences and the complex behavior of crowd should be taken into account. The complex behavior of crowds has yet to be fully described, even though individual differences can be dealt with statistically. This paper proposes time lag considered (TLC) crowd model based on a probabilistic approach. The load reduction factor, which reflects the effect of a general degree of synchronization among crowd, is proposed. Extensive Monte Carlo simulations were carried out to determine various crowd behaviors by using the TLC crowd model proposed. The TLC crowd model can rationally treat the energy loss of various crowd patterns. This indicates that it may be used as a theoretical basis in refining dynamic load factor of crowd loading.

• The Journal of the Convergence on Culture Technology
• /
• v.1 no.2
• /
• pp.77-83
• /
• 2015

The purpose of this study is to prove the increase of range of motion of shoulder joint in the patients with shoulder adhesive capsulitis by applying the vibratory stimulation. In terms of subjects of the study, the experimental group 15(4 male, 11 female)and the control group 15(5 male, 10 female) were divided. The measurement of the shoulder range of motion was taken by measuring the degrees of flexion, abduction, and external rotation with a goniometer from pre treatment to one to four weeks. The results were as follows : In the experimental group and control group, there was the statistical significance in the range of motion of the shoulder flexion, abduction, and external rotation during four weeks. In summary, the vibratory stimulation are effective interventions for improving shoulder adhesive capsulitis, patient's range of motion of shoulder joint.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.441-445
• /
• 2020

A Permanent Magnet Synchronous Motor (PMSM) for an electrical power steering system (EPS) is adopting various dual three-phase type stator windings to get the high fault tolerance capability when the motor runs at the failure condition. In this paper, we analyze the effects of stator winding arrangements on the characteristics such as torque and efficiency of the PMSM with leading and lagging current angle variations using finite element method. As a result, the most valuable design criteria are proposed to select stator winding method. Especially, we suggest the most appropriate winding method in terms of torque and efficiency, extending constant output area and decreasing noise and torque ripples.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.5
• /
• pp.1067-1072
• /
• 2012

Recently, linear motors have been widely researched and have been increasingly used in various industrial applications. Especially, permanent magnet linear synchronous motors(PMLSMs) have been getting the spotlight in the transportation system. A PMLSM is structurally simple and has a lot of merits such as high speed, high thrust force, etc. However, in case of a long stator system which arranges armature to the full length of transportation lines, a PMLSM has some disadvantages such as the material cost increase and long manufacturing time. Hence, in order to overcome these problems, the PMLSM with stationary discontinuous armature structure and concentrated windings was proposed. However, this method occurs undesirable cogging force by outlet edge effect. The cogging force causes thrust force ripples and generates noise and vibration. Therefore, in this paper, we proposed installation method of auxiliary pole PMLSM with concentrated winding applying bifurcating in order to reduce cogging force by the outlet edge when the armature is placed in a discontinuous arrangement. Also, we have examined characteristics of outlet edge cogging force using 2-D finite element analysis(FEA).

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.6
• /
• pp.889-895
• /
• 2011

PMLSM is structurally simple and it have a lot of merits such high speed, high thrust force etc., but cogging force by slot-teeth structure of armature and cogging force by outlet edge effect occurs. This is the cause of thrust force ripple and generate the noise and vibration. Therefore, in this paper we proposed installation of an auxiliary pole to mover of the PMLSM in order to decrease cogging force by the outlet edge which came necessarily into being discontinuous arrangement of the armature. Also, outlet edge cogging force designed a form of the auxiliary pole which the minimum became, and we compared a outlet edge cogging force characteristic along a winding method of an armature as we used 2-D of finite element analysis.

• Korean Journal of Agricultural Science
• /
• v.34 no.1
• /
• pp.61-65
• /
• 2007

This study was conducted to evaluate the response of CIDR-S on estrus synchronization of dairy goats and the effect of artificial insemination on conception rate. Estrus synchronization of sexually matured Saanen goats was induced with insertion of CIDR-S into vagina for 15 days and injection of 500 IU PMSG before removal of CIDR-S. Artificial insemination was conducted using liquid or frozen semen by intra-cervical insemination with synchronized does. Estrus synchronization was 90% using CIDR-S insertion for 15 days. Conception rate of inseminated does was 20% - 25%, while that of natural mated does was 100%. These results suggested that synchronization of dairy goats can be successfully induced and artificial insemination method has to be improved for the practical use in dairy goats.