• Journal of Conservation Science
• /
• v.19
• /
• pp.19-30
• /
• 2006

Alteration of physical and chemical characteristics and the effect of removal of mineral substances in waterlogged archaeological woods by different cleaning processes were examined using oak wood(Quercus spp.) that was excavated from wetland near Gwangju, Korea. Cleaning methods employed in the present work were (1) tools, (2) deaeration, (3) EDTA and (4) ultrasonic cleaning, which are being currently applied in the field of preservation treatment. Cleaning process were performed independently or continuously. Composition of mineral substances in the waterlogged archaeological wood was almost same as the that of soil in which waterlogged archaeological woods were buried. In case of independent cleaning, tools cleaning efficiently removed the mineral substances on surface. Surface color become brighter after cleaning with EDTA. In contrast, deaeration and ultrasonic cleaning did not show any significant removal of mineral substances. In continuous cleaning process, tool cleaning as the first step treatment showed the same effect as shown in independent cleaning. Although deaeration as the second step cleaning did not remove the mineral substances, it could be assumed to contribute the infiltration of dimensional agents by homogenization of wood. EDTA treatment (the third step cleaning) removed the iron(Fe) and increased the whiteness of wood color. The ultrasonic treatment (the fourth step cleaning) removed the sodium(Na) remained after EDTA treatment and the fine mineral substances.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.5
• /
• pp.649-654
• /
• 2006

It was investigated the effects of pre-treatment method on the microbes on the surface of radish (Raphanus sativus L.) leaves. Independent variables put in water washing ($X_1$), microwave treatment ($X_2$) and steam treatment ($X_3$) using central composite design and response surface analysis. It was not detected in the pathogenic microbes, Samonella spp., Camphylobacter spp., Vibrio spp., Shigella spp., Staphyloccocus spp., on the surface of collected radish leaves without pre-treatment. But general microbes showed $3.90{\times}10^5{\sim}1.20{\times}10^7CFU/g$ of total microbes, $1.10{\times}10^2{\sim}2.00{\times}10^5CFU/g$ of E. coli, $2.40{\times}10^3{\sim}3.55{\times}10^6CFU/g$ of yeast/mold on the surface of various radish leaves and lactic acid bacteria was detected or not according to collected samples. The best method of pre-treatment was steam treatment on the microbe reduction effect of samples surface. Also, the multiplex regression coefficients analysis was calculated three independent variables ($X_1,\;X_2,\;X_3$) and dependent variables (total microbes, lactic acid bacteria and yeast/molds). It showed high correlation $R^2$, 0.89, 0.87, 0.85, respectively. For effective reduction of surface microbes, the best method was water washing with microwave or steam treatment at the same time.

• Journal of Navigation and Port Research
• /
• v.38 no.4
• /
• pp.379-384
• /
• 2014

In case of sunken tankers, remaining-oil recovery operation should be conducted due to possible oil spill accident. However, the deep sea operation make difficulties in checking the completion of remaining oil recovery process, therefore the work termination procedure is very important. In this paper, a reasonable work termination procedure through the comparison and analysis of two cases(Youil No.1 and Osung No.3, Kyung-Shin) which were performed in different method, using disparate equipment. By investigating previously applied methods and techniques, work speed, safety and expenses were compared. The proposed ending procedure of the remaining-oil recovery project is to recover the remaining oil from each cargo tanks and to clean up such tanks whilst an independent surveyor proceeds to a confirmation procedure whereby said surveyor checks out whether any remaining oil exists by putting a stick in each cleaned up tanks and opening up the hatch cover of the tanks or the top place of the tanks to confirm the cleanness of oil. Such procedure shall be done through discussion by the ordering party, contractor and the independent surveyor all together with a flexible application.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.11
• /
• pp.855-859
• /
• 2011

The main pollutants from zirconium alloy tubing manufacturing process in nuclear industry are nitrate ($NO_3-N$) and fluoride (F-)Nitric acid, and hydrofluoric acid is used for acid pickling. The process for the removal of nitrate and fluoride is composed of 1st chemical coagulation, SOD (Sulfur Oxidation Denitrification) process using sulfur-oxidizing denitrification, and 2nd chemical coagulation. The characteristic of the wastewater treatment is an application of SOD process. The SOD Process is highly received attention because it is significantly different from existing processes for sulfur denitrification. A JSC (JeonTech-Sulfur- Calcium) Pellet is unification of sulfur and alkalinity material. According to result of SOD process in wastewater treatment plant, the removal efficiency of T-N was over 91% and the average concentration of T-N from influent was 147.55 mg T-N/L and that from effluent was 12.72 mg T-N/L. Therefore, SOD process is a useful to remove nitrogen from inorganic industrial wastewater and a new development of microbial activator was shown to be stable for activation of autotrophic bacteria.

• Journal of Life Science
• /
• v.34 no.5
• /
• pp.320-332
• /
• 2024

The aims of this study were to compare the differences in hemodynamics between cigarette smoking and using heated tobacco products (HTPs) and to determine the acute effects of using HTPs on cardiac autonomic regulation. Another goal was to examine the acute cardiac autonomic responses when using different tobacco sticks in HTPs. Sixteen healthy male smokers completed an open-label, randomized, crossover trial consisting of non-smoking (NS), cigarette smoking, and the use of two different HTPs (IQOS with HEETS; lil SOLID with Fiit). Sub-trials, which included NS, lil SOLID with Fiit, and lil SOLID with HEET, were performed on eight smokers among the total subjects. Hemodynamic variables, such as systolic blood pressure (SBP) and diastolic blood pressure (DBP), and heart rate variability were measured before, during, and 30 minutes after using each tobacco product. Using HTPs resulted in a significant increase in both SBP and DBP, comparable to smoking cigarettes. Cardiac sympathetic activity significantly increased, and cardiac vagal tone (CVT) significantly decreased after acute exposure to HTP aerosol, similar to the effects of cigarette smoke exposure. Furthermore, differences in the withdrawal of CVT were observed when using different tobacco sticks in the same HTPs. The findings of this study indicate that acute exposure to HTP aerosol increases the hemodynamic burden and disrupts cardiac autonomic balance, similar to exposure to cigarette smoke. Moreover, depending on the type of tobacco stick inserted into the HTP device, acute withdrawal of CVT may have been enhanced.

• Journal of dental hygiene science
• /
• v.7 no.2
• /
• pp.101-106
• /
• 2007

This research was based on self-filling survey which 128 dental hygienists who work in dental clinic and dental hospital on May 2006 through July 2006. This survey was analyzed the prevention against virus infection in dental hygienist at medical treatment. As follows analyzed results The experience of get a hand pricked by an infected needle rate is 76.6 percent and the majority of the dental hygienist are sterilize by disinfectant after wash hand and draw blood. The most of dental hygienist are experienced the education of the prevention infection in student and they think that It is necessary to prevention infection in medical treatment. The proportion of use the glove and mask in medical treatment and disuse the glove after medical treatment and the mask when mask get damped is high but the rate of put on the goggle in medical treatment and use the glove in washing and re-treat is low irrespective of age, clinical career, work place. As a result of Independent-sample T Test, the Hygienist who have experience the education of the prevention against virus infection are more excellent work than in-experience group in medical treatment. So we can find that the experience of the education of the prevention infection is very significant to prevention infection in dental hygienist.

• Journal of the Korean earth science society
• /
• v.21 no.6
• /
• pp.663-674
• /
• 2000

A total of 165 independently oriented core samples were collected from 19 Cretaceous Yuchon Group sites in Kosong area, the southernmost part of the Miryang subbasin of the Kyongsang Basin in southern Korea. Stepwise AF and thermal cleaning revealed antipodal ChRM from 95 samples from 14 sites. Mean ChRM direction is d=26.0$^{\circ}$, i=49.4$^{\circ}$ (${\alpha}_{95}$=8.2$^{\circ}$, k=24.5, n= 14) before bedding correction and d=28.1$^{\circ}$, i=54.2$^{\circ}$ (${\alpha}_{95}$=4.8$^{\circ}$, k=70.6, n= 14) after bedding correction. A 2.88-fold increase of the precession parameter k by bedding correction indicates pre-folding age of the ChRM with 99% confidence level. Palaeomagnetic pole position calculated from the mean ChRM is 67.0$^{\circ}$N, 210.6$^{\circ}$E (dp=4.7$^{\circ}$, dm=6.7$^{\circ}$), which is significantly different neither from the poles of other part of the Kyongsang Basin nor those of Eurasia including SCB and NCB. This suggests stable relative position of the study area with regard to other parts of the Kyongsang Basin as well as to Eurasia continent since Cretaceous. Three ploarity reversals in the Kosong Formation in addition to the coexistence of normal and reversed polarities in the overlying Andesites and Welded Tuff suggest, in reference to the worldwide geomagnetic polarity time scale, an Albian to Maastrichtian (polarity chron 32r-31r) age of the Yuchon Group of the study area. An alleged hypothesis of stratigraphical correspondence between the Kosong Formation in the study area and the Tadaepo Formation in Pusan area is, however, not tenable: Not only because the latter shows a short reverse polarity only in its lowest part of the sequence but also because the Andesites overlying it is wholly normally magnetized, in contrast to the frequent reverals in the case of both the Kosong Formation and Andesites above it.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.10
• /
• pp.774-781
• /
• 2011

Nitric acid and hydrofluoric acid are used for acid pickling in zirconium alloy tubing manufacturing process. Nitrate and fluoride in the wastewater were treated by chemical coagulation and SOD (Sulfur Oxidation Denitrification) process. This study is investigated the effect of fluoride concentration and the optimal condition for SOD process. The limited fluoride concentration for SOD process was below 20 mg F-/L. The adjusted pH and alkalinity by NaOH and $NaHCO_3$ was shown to be more effective for removal of nitrate compared with using NaOH. Furthermore, the microbial activator mixed trace elements and ingredient for alkalinity did not only supplement with alkalinity but also enhance the growth and proliferation for sulfur-oxidizing bacteria. As a result, the inorganic industrial wastewater was successfully treated by the microbial activator in SOD process without continuous addition of seed sludge. Finally, SOD process was shown to remove nitrate in industrial wastewater and to contribute the microbial activator for activation of sulfur-oxidizing bacteria.

• Korean journal of food and cookery science
• /
• v.32 no.1
• /
• pp.107-113
• /
• 2016

The purpose of this study was to analyze factors that influence prerequisite program (PRP) performance of hospital foodservice operation. Data was collected through surveys given to 65 dietitians working in general hospital with ${\geq}100beds$. Importance score of sanitary management for the self-operated establishments was significantly higher than that of contract-managed in the areas of working environment management (p<0.01), waste management (p<0.05), clean disinfection management (p<0.05). Performance score of hospitals with ${\leq}300beds$ was significantly lower than that of hospitals with ${\geq}300beds$ in personal hygiene management (p<0.05). Moreover, importance score of dietitians spending ${\geq}3hours$ on inspection time was significantly higher than that of dieticians spending ${\leq}3hr$ in waste management area. According to the results of Pearson correlation analysis, PRP performance score was positively related with dietitian's career (p<0.05), number of submitted beds (p<0.05), cooking process inspection time (p<0.05), dietitian's job satisfaction (p<0.01), and holding rate of utensil and equipment (p<0.05). In addition, the results of multiple regression analysis showed that dietitian's job satisfaction (p<0.001) and holding rate of utensil and equipment (p<0.05) had a significant positive effect on prerequisite program performance. In conclusion, improvement of working condition to increase dietitian's job satisfaction and securing of utensils and equipments are high priorities for improvement of PRP performance.

• Food Science of Animal Resources
• /
• v.29 no.6
• /
• pp.695-701
• /
• 2009

This study was performed to evaluate the effectiveness of biological critical control points using the genetic profile of Escherichia coli isolates from pork cutting plants. Samples were collected from carcasses, equipment (knife, table, glove, transport belt, boning and skinning machine), the environment (wall and floor), and meat cuts during the cutting process from two plants. Pulsed-field gel electrophoresis (PFGE) was used to characterize the E. coli isolates. An identical genotype was detected from the carcasses, equipment, environment, and final meat cuts, and showed that the incoming carcasses, which were contaminated during transportation from slaughterhouses, were a major source of E. coli that was spread throughout processing. Also, consistent cross-contamination due to improper cleaning and disinfection procedures was another possibility. As a result, incoming carcasses and cleaning procedures should be considered critical control points in pork cutting plants, since a heating step is not used to inactivate microorganisms. Furthermore, the high rate (59.6%) of E. coli isolation indicates E. coli can be a good indicator in livestock processing plants even though it has genetic diversity.