• International Journal of Highway Engineering
• /
• v.15 no.6
• /
• pp.135-141
• /
• 2013

PURPOSES : The lack of details of design guideline for zig-zag shaped section approaching central bus stop leads an traffic accident proneness. So, this study analysed the geometric elements of central bus stop area in terms of vehicle dynamics and suggested design alternatives. METHODS : The study analysed a dynamic behaviour of bus moving in and out of zig-zag shaped section using Auto-Turn under scenarios. Based upon dynamic analysis, the study found out the width of overtaking lane is the most influential factor for a safe moving at zig-zag alignment. RESULTS : The width of overtaking lane at design speed of 40, 50, and 60 km/h respectively was suggested given taper ratio of 1 to 10 required for Bus Rapid Transit (BRT), and the lane width is not wider than 4.0m which possibly makes two vehicles using the same lane. Also, the width of overtaking lane which mitigates the taper ratio was suggested with the same restriction about the maximum lane width. CONCLUSIONS : The results of the study can be used to prepare a design guideline on zig-zag shaped alignment of central bus exclusive lanes. The more stable moving is expected by applying the design alternatives suggested, therefore the lower rate of traffic crashes at the vicinity of central bus stops.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.2
• /
• pp.583-595
• /
• 2014

Currently, Korean transportation policies are aiming for increase of safety and environment-friendly and efficient operation, by avoiding construction and expansion of roads, and upgrading road alignments and facilities. This is revealed by that there have been 22 road expansion projects (30%) and 50 road improvement projects (70%) under the 3rd Five-Year Plan for National Highways ('11~'15), while there were 53 road expansion projects (71%) and 22 road improvement projects (29%) under the 2nd Five-Year Plan for National Highways. For more effective road improvement projects, there is a need of choosing projects after an objective and scientific safety assessment of each road, and assessing safety improvement depending on projects. This study is intended to develop a model for this road safety analysis and assessment. The major objective of this study is creating a road safety analysis and assessment model appropriate for Korean society, based on the HSM (Highway Safety Manual) of the U.S. In order to build up data for model development, the sections thought to have identical geometrical structure factors in 5 lines, Cheonbuk province, were divided as homogeneous sections, and representative values of geometric structures, facilities, traffic volume, climate conditions and land usage were collected from the 1,452 sections divided. In order to build up data for model development, the sections thought to have identical geometrical structure factors in 5 lines, Cheonbuk province, were divided as homogeneous sections, and representative values of geometric structures, facilities, traffic volume, climate conditions and land usage were collected from the 1,452 sections divided. The collected data was processed correlation analysis of each road element was implemented to see which factor had a big effect on traffic accidents. On the basis of these results, then, an accident model was established as a negative binomial regression model.Using the developed model, an Crash Modification Factor (CMF) which determines accident frequency changes depending on safety performance function (SPF) predicting the number of accident occurrence through traffic volume and road section expansion, road geometric structure and traffic properties, was extracted.

• Journal of Korean Society of Transportation
• /
• v.30 no.4
• /
• pp.21-32
• /
• 2012

Exclusive bus lane (EBL) is typically located in the roadway median, and is accessed by weaving across the GPLs(general purpose lanes) before entering from the left lane of the GPLs. To maximize the potential for successful EBL operations, a critical design issue that requires special attention is the length of bus weaving section before entering EBL. The process of developing guidelines for the length of bus weaving section can be supported by a sensitivity analysis of performance measure (safety) with respect to the bus weaving distance. However, field data are difficult to obtain due to inherent complexity in creating performance measure (safety) samples under various interesting flows and bus weaving distance that are keys to research success. In this paper, VISSIM simulation is applied to simulate the operation of roadway weaving areas with EBL, and based on vehicle trajectory data from microscopic traffic simulation models, the Surrogate Safety Assessment Model (SSAM) computes the number of surrogate conflicts (or degree of safety) with respect to the bus weaving distance. Then, a multiple linear regression (MLR) model using safety data (number of surrogate conflicts) is developed. Finally, guidelines for bus weaving distance are established based on the developed MLR. Developed guidelines explicitly indicate that a longer bus weaving distance is required to maintain desired safety as weaving volume increases.

• International Journal of Highway Engineering
• /
• v.10 no.1
• /
• pp.97-104
• /
• 2008

Many atypical structures on the roadside are exposed to traffics unshielded posing great danger. One way to shield an atypical structure to secure the occupant safety is to stack energy absorbing material modules in front of the structure. This paper presents the analysis method of module type crash cushion made of EPS blocks using simple energy balance of the car and crash cushion and numerical examples for 0.9ton-500km/h, 0.9ton-60km/h and 0.9ton-70km/h impact are presented. This method gives simple estimation of maximum acceleration, time of crash, whether or not the vehicle stops completely before whole cushion is being crushed. However, since the acceleration and velocity data from the analysis is so crudely spaced that calculation of safety indices such is RA and OIV is not possible. Problem is overcome by using data interpolation. The spline and linear interpolation is introduce and safety analysis is made and the results are compared.

• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.401-408
• /
• 2009

Old national Road No. 59 that connects Danyang and Gagok has 35 dangerous cut slopes. It is relatively narrow and has a poor alignment. The torrential rains in 2002 and 2006 has caused numerous slope collapses, landslides and road settlements in this area. The old road's high risk level lead to the planning and construction of a new national road. During the construction of the new road in December 2006, the right side of Dugcheon Tunnel entrance has collapsed and tension cracks were observed on the district road above the tunnel. In order to determine the cause of failure, intensive field investigation and monitoring cracks were performed together with Lower Hemisphere Projection Analysis, Limit Equilibrium Analysis and Finite Difference Analysis.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.2
• /
• pp.68-78
• /
• 2000

This paper suggests a new map-matching algorithm for matching traveling trace of vehicle, which is measured by GPS receiver, to the road of a digital map This eventually brings the Improvement of positioning accuracy of the vehicle with GPS receiver After representing the travelling vehicle's motion by state equations using Singer's model, the proposed map-matching algorithm places the position of a vehicle right on the road and also improves the positioning accuracy of the vehicle using a Kalman filter In the crossroad, since it is difficult to determine precisely a current travelling road, we take linear regression to the estimated values from Kalman filtering This gives the direction angle of turning vehicle, then we can determine the correct route direction after comparing with each route-direction angle at the intersection.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.165-172
• /
• 1988

An optimal network design method using continuous form of design variables is considered. Modified Hooke-and-Jeeves algorithm has been implemented in order to solve nonlinear progamming problem which is approximately equivalent to the real network design problem (NDP) with system. efficiency criteria(i. e. travel time and costs) and construction cost as objective function. Various forms of construction cost function, locations of initial solution, and dimension of initial step size of link improvement are taken into account to show the validity of this approach. The results obtained are quite promising in terms of the numbers of evaluations in solving NDP, and the speed of convergence. Finally, some techniques in choosing efficient intial solution, initial step size and approximation are given.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.964-970
• /
• 2002

In this paper, cruciform radiation pattern antenna was designed and fabricated. The fabricated antenna is applicable to intersections which is composed of four eight-lane roads each having 60 m of width and 200 m of length. The design theory was based on Woodward-Lawson method and the 6 monopole elements with the strip feeding network are made by linear array on the micro-strip board. In the results, - 13.5 dB of return loss and 120 MHz(6 %) of -10 dB bandwidth were obtained at the 2 GHz. Also, at 1.95 GHz, -6 dB of gain fall was seen at $\pm$45$^{\circ}$ and thus, it is possible to say that the presented antenna has well-shaped cruciform radiation pattern.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.99-108
• /
• 2010

Space Syntax methodology can be quantitatively calculated spatial cognitive analysis by number of turns_ In the existing GIS-based spatial information service provide 'physical distance' due to the shortest distance as a priority. but pedestrians tends to choose the path with concerned a lot of emphasis of safety, more vitality way from the crime at night, traffic accidents, and comfort on a road. Human's 'psychological distance' may reflect the spatial information services and provided path should be. In this study, using GIS Road Data implements the axial map with idea of the linear simplification principles. Traditional axial map of the Space Syntax get the assumption from the actual traffic values by comparing the results of correlation relationship. Through these methods, the actual relationship between traffic and test values have the correlation value($R^2$= 0.5387) 50% level and was able to get the results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.3
• /
• pp.102-111
• /
• 2012

Expresway traffic accident is fatal accident by high speed, especially human injury is a great social issue. This paper aims to identify characteristic differences of highway accidents that involve human injuries or not. To analysis the elements that affect the two types of accidents used the logistic regression model. The analysis showed that human injury accident rate is increased in case of straight road, flat, or cut-slope areas, barriers, male driver, and older driver. These results provide the ground for actions to counter the problems. By discovering factors for accidents leading to fatality, this study can provide important implications for authorities that establish highway safety measures and policies in preventing human injuries or deaths from car accidents.