• Journal of the Korea Society of Computer and Information
• /
• v.25 no.2
• /
• pp.59-66
• /
• 2020

In this paper, we propose a pipe leak detection system through data collection using low-power wireless acoustic sensor modules and data analysis using deep auto-encoder. Based on the Fourier transform, we propose a low-power wireless acoustic sensor module that reduces data traffic by reducing the amount of acoustic sensor data to about 1/800, and we design the system that is robust to noise generated in the audible frequency band using only 20kHz~100kHz frequency signals. In addition, the proposed system is designed using a deep auto-encoder to accurately detect pipe leaks even with a reduced amount of data. Numerical experiments show that the proposed pipe leak detection system has a high accuracy of 99.94% and Type-II error of 0% even in the environment where high frequency band noise is mixed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.605-613
• /
• 2004

Recently, the semantic web stands out in the next generation web. To realize the semantic web, the metadata integration is required between different metadatas on the web for metadata management. Otherwise, the integrated structure is needed to accommodate all of semantic, syntax and structure. RDF is one of the core technology and is more efficient framework for technology and interchange of metadata in the web, In this paper, for metadata management, we designed and implemented the RDF authoring system which converts each of metadata into RDF and makes it easy to manipulate and manage the different metadatas. For this, we researched about the RDF creation using Dublin Core metadata, the conversion of XML document into RDF, the RDF expression by N-Triple form and the integration of WSDL and RDF, and implemented the system on the lava platform. Basically, users using this system can integrate and manage metadatas easily even if they are not expert.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.254-258
• /
• 2002

멀티미디어의 내용 기반 검색을 위한 표준인 MPEG-7은 컨텐츠의 비주얼 내용 정보를 표현하기 위해 Part3에서 비주얼 기술자를 정의하고 있다. MPEG-7 비주얼 컬러 기술자에 의해 정의된 컨텐츠의 컬러 정보를 추출하기 위해서는 주파수 영역 정보를 공간 영역 정보로 변환해야 한다. 이때 변환 과정에서 수행되는 IDCT(Inverse DCT)의 연산 속도는 특징 추출 시간을 증가시키는 원인이 된다. 본 논문에서는 IDCT의 연산 시간을 최소화하는 방법으로 DCT 계수 영역에서 컬러 특징 정보를 빠르게 추출하는 방법에 대해 제안하였다. 제안한 방법에 대해 MPEG-7 실험 모듈과 공인 데이터 베이스를 이용하여 실험을 수행하였고 실험 결과, 검색 율이 평균 5% 감소한 반면 추출 시간은 평균 80% 향상되었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.553-556
• /
• 2014

최근 선박 전자 장비들이 디지털 인터페이스 표준을 위해 NMEA(National Marine Electronics Association)에서는 CAN Part B 표준 버스 프로토콜 기반의 네트워크 표준인 NMEA2000 표준을 개정하였다. NMEA2000는 네트워크상에서 PnP 기능을 가지는 멀티토커, 멀티리스너로서 네트워크 관리를 위한 서버가 필요 없는 멀티마스터의 실시간 제어 네트워크이다. 본 연구에서는 NMEA2000 기반의 선박 센서용 프로토콜 변환 알고리즘의 구현과 NMEA2000/CAN/Ethernet/RS422, RS485, RS232 포맷 변환 및 NMEA2000 기반 전용 케이블을 고려한 아날로그 데이터 모듈 외형 설계 및 개발을 목표로 한다. 본 연구를 통해 NMEA2000 핵심 기술의 개발과 적용을 통해 새로운 조선 IT 시장을 선점할 수 있을 것으로 기대된다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.1-8
• /
• 2004

This paper describes the design of monolithic optical transceiver circuitry being used as a part of the fiber optic modules. It has been designed in 0.6 ${\mu}{\textrm}{m}$ 2-poly 3 metal silicon CMOS analog technology and operates at 155.52 Mbps(STM-1) data rates. It drives laser diode to transmit intensity modulated optical signal according to 155.52 Mbps electrical data from system. Also, it receives 155.52 Mbps optical data that transmitted from other systems and converts it to electrical data using photo diode and amplifier. To avoid noise and interference between transmitter and receiver on one chip, layout techniques such as special placement, power supply separation, guard ring, and protection wall were used in the design. The die area is 4 ${\times}$ 4 $\textrm{mm}^2$ and the estimated power dissipation is less than 900 ㎽ with a single 5 V supply.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.11-17
• /
• 2004

This paper describes the implementation of monolithic optical transceiver circuitry being used as a part of the fiber optic modules. It has been fabricated in 0.6 ${\mu}{\textrm}{m}$ 2-poly 3-metal silicon CMOS analog technology and operates at 155.52 Mbps(STM-1) data rates. It drives laser diode to transmit intensity modulated optical signal according to 155.52 Mbps electrical data from system. Also, it receives 155.52 Mbps optical data that transmitted from other systems and converts it to electrical data using photo diode and amplifier. To avoid noise and interference between transmitter and receiver on one chip, layout techniques such as special placement, power supply separation, guard ring, and protection wall were used in the design. The die area is 4 ${\times}$ 4 $\textrm{mm}^2$, and it has 32.3 ps rms and 335.9 ps peak to peak jitter on loopback testing. the measured power dissipation of whole chip is 1.15 W(230 mW) with a single 5 V supply.

• Journal of the Korea Convergence Society
• /
• v.7 no.6
• /
• pp.23-28
• /
• 2016

In this study, an investigation study on EMC(Electromagnetic Compatibility) is presented for power converter circuit. A DC-DC power converter circuit using LT3652 chip is designed and fabricated. The simulation results using ANSYS SIwave for far field radiation and unwanted emissions are presented. To minimize the unwanted emissions, we design a optimized circuit by using capacitors and ground posts. The conducted and radiation emissions are measured in the EMC test chamber based on standardized testing procedures of CISPR 22. The measured EMI emission values for a power converter circuit are presented and compared with the original circuit. The results show that the unwanted emissions from the circuit are tremendously diminished due to the applied EMI reduction techniques. The results proposed here can be usefully applied on designing power converter modules.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.148-158
• /
• 2012

This paper presents the design of the incremental delta-sigma ADC. The proposed circuit consists of pre-amplifier, S & H circuit, MUX, delta-sigma modulator, and decimation filter. Third-order discrete-time delta-sigma modulator with 1-bit quantization were fabricated by a $0.18{\mu}m$ CMOS technology. The designed circuit show that the modulator achieves 87.8 dB signal-to-noise and distortion ratio (SNDR) over a 5 kHz signal bandwidth and differential nonlinearity (DNL) of ${\pm}0.25$ LSB, integral nonlinearity (INL) of ${\pm}0.2$ LSB. Power consumption of delta-sigma modulator is $941.6{\mu}W$. It was decided that N cycles are 200 clock for 16-bits output.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.407-410
• /
• 2012

Recently, wireless network services are widely used, depending on the development of wireless network module technologies and the utilization gradually expanded, and thus is a trend that appears a lot of IT convergence industries. For this study, the OBD-II communication to Import your vehicle information, and other external devices in high-speed driving condition of the vehicle to verify the information system was developed to transfer data to an external server. From various sensors inside the vehicle using the OBD-II connector easily convert all users to read the information, then, Sent to the external server using the wireless network module, high-speed vehicle status check system was implemented. It was to test the performance of the system was developed using the actual circuit in a high-speed road racing vehicles. Transfer data generated from high-speed driving vehicles through the OBD-II scanner and check the status of a high-speed vehicle system was confirmed that this data is normally received. In the future, these new cars convergence of IT technology will grow as a new field of research.

• Journal of KIISE
• /
• v.42 no.9
• /
• pp.1078-1089
• /
• 2015

In this paper, we propose the Min-hash Assisted Delta-compression Engine(MADE) to improve the lifetime of NAND flash-based storages at the device level. MADE effectively reduces the write traffic to NAND flash through the use of a novel delta compression scheme. The delta compression performance was optimized by introducing min-hash based LSH(Locality Sensitive Hash) and efficiently combining it with our delta compression method. We also developed a delta encoding technique that has functionality equivalent to deduplication and lossless compression. The results of our experiment show that MADE reduces the amount of data written on NAND flash by up to 90%, which is better than a simple combination of deduplication and lossless compression schemes by 12% on average.