• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.56 no.3
• /
• pp.136-141
• /
• 2007

In this paper, a new simple control method for active power filter which can realized the complete compensation of the harmonic currents is proposed. In the proposed scheme, a compensating current reference generator employing resonance model implemented by a DSP(Digital Signal Processor) is introduced. Deadbeat control is employed to control the active power filter. The switching pulse width based SVM(Space Vector Modulation) is adopted so that the current of active power filter is been exactly equal to its reference at the next sampling instant. To compensate the computation delay of digital controller, the prediction of current is achieved by the current observer with deadbeat response.

• 전기의세계
• /
• v.29 no.3
• /
• pp.179-184
• /
• 1980

This paper presents in some detail a discussion of the design of the digital control system without nonlinear elements to exhibit deadbeat performance in response to step inputs. The transfer function of digital dontroller is obtained by calculating the sequence of inputs and outputs of the digital controller for deadbeat performance. Digital controllers are designed for unity feedback multivariable systems by this method, which is well adapted for obtaining a solution by a digital computer.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.297-298
• /
• 2011

최근 계통연계형 인버터 시스템에서 고 신뢰 운전이 매우 중요한 과제로 대두되고 있다. 특히 인버터의 고장에 관한 많은 연구가 진행되고 있다. 본 논문에서는 계통연계형 인버터에서 직류단 전압 센서의 고장 허용 제어 알고리즘을 제안한다. 직류단 전압의 추정값으로 고장의 발생 시에 허용 제어를 수행한다. 매우 빠른 동특성을 가진 제어기가 요구되는 제안된 알고리즘의 적용을 위해 데드비트 전류제어기를 사용한다. 시뮬레이션을 통해 제안된 알고리즘을 검증한다.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1056-1058
• /
• 2000

Deadbeat technique has been proposed as a digital controller for an UPS inverter to achieve the fast response to a load variation and to conserve a very low THD under a nonlinear load condition. This scheme contains a fatal drawback, sensitivity against parameter variation and calculation time delay. This paper proposes a second order deadbeat current controller, which fundamentally solves the calculation time delay problem and certainly guarantees the robustness of the parameter's variation. This is shown theoretically and practically through simulation and experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.19-26
• /
• 2007

This paper presents a precision position control of induction motor using disturbance observer to reduce disturbance effects. It shows that proposed algorithm is strong in induction motor precision control for disturbance change. This system with disturbance observer using deadbeat control, which has high benefit, is good for quick disturbance compensation. To show this effectiveness the whole process is simulated by simulink, and also experimented by DSP6416 with TCP-IP network board.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.2
• /
• pp.221-230
• /
• 1988

In the microcomputer-based velocity control for an electro-hydraulic servo system, the effects of control methods and control hardware on the performance of the system were investigated. Experiments were carried out with PID and deadbeat controllers using 8 or 16 bit microprocessor and 8 or 12 bit A/D and D/A converters. It is found that the transient response of the system is better with PID controller than with deadbeat controller. When the number of bits of the microprocessor and converters are small, it is also found that amplitude quantization due to limited word-length gives significant effects on transient responses of the system. Analytically predicted step responses are in good agreement with experimental ones.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.229-230
• /
• 2011

This paper presents deadbeat controller for output current in the utility-interactive inverter. The time delay related with deadbeat controller is compensated by using prediction control. By computer simulation and experiment, the dynamic characteristics of deadbeat controller is verified.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.4
• /
• pp.170-178
• /
• 2001

Deadbeat technique has been proposed as a digital controller for an UPS inverter to achieve the fast, response to a load variation and to conserve a very low THD under a nonlinear load condition. This scheme contains a fatal drawback, sensitivity against parameter variation and calculation time delay. This paper proposes a second order deadbeat controller, which fundamentally solves the calculation time delay problem and certainly guarantees the robustness of the parameter's variation. RLP(Repetitive Load Predictor) which predicts the load current ahead of two sampling time and FVR(Fundamental Voltage Regulator) which eliminates the fundamental errors of the output voltage are also proposed for the second order deadbeat controller to apply to UPS inverter systems. These are shown theoretically and practically through simulation and experiment.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1228-1230
• /
• 1998

The deadbeat control has many advantage such as the ouput response without a ripple and the fast settling time. This paper presents a deadbeat control system to damp out the sustained low frequency oscillation. The proposed deadbeat control system consists of th integral controller and the state observer, and it is simulated on the one-machine infinite-bus model of a power system. The efficiency of the proposed control system is verified through the several case studies.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.163-166
• /
• 2001

In this paper, a two-level switching algorithm ov the deadbeat to control PWM inverter is proposed. A modified algorithm of the deadbeat is suitable for the UPS system. Two levels in the pulse pattern are used. This scheme allows the use of higher switching frequency for a given computation time delay, which results in lower total harmonic distortion at the output. The proposed control scheme is implemented using TMS320F240 DSP for controlling on inverter.