• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.71-80
• /
• 2003

Though a nonlinear time history analysis may be provided to estimate more exactly the seismic performance of building structure, approximation methods are still needed in the aspect of practicality and simplicity, In converting a multi-story structure to an equivalent SDOF system, the mode vectors of the multi-story structure are assumed as the mode shape in elastic state regardless of elastic or elastic-plastic state. However, the characteristics of displacement mode are also changed after the yielding made in the structural elements, because the structure becomes inelastic in each incremental load step. In this research, a method of converting MDOF system to ESDOF system is presented by using nonlinear displacement mode considering the mode change of structures after the yielding. Also, the accuracy and efficiency of the method of the nonlinear displacement mode method of the estimate of seismic response of Mixed Building Structures were examined by comparing the displacements of the roof level of the multi-story building structures estimated from this converted displacement response of ESDOF with the displacement of the roof level through the nonlinear dynamic analysis of the multi-story building structures subjected to an actual earthquake excitation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.10
• /
• pp.754-764
• /
• 2001

Class A bipolar second-generation current conveyor (CCII) with low current-input impedance and its offset-compensated CCII for high-accuracy current-mode signal processing are proposed. The CCIIs consist of a regulated current-cell for current input, a emitter follower for voltage input, and a cascode current mirror lot current output. In these architecture, the two input stages are coupled by current mirror to reduce the current input impedance. Experiments show that the CCII has impedance of 8.4 Ω and offset voltage of 40 mV at current input terminal. To reduce this offset, the offset-compensated CCII adopts diode-connected npn and pnp transistor in the proposed CCII. Experiments show that the offset-compensated CCII has current input impedance of 2.1 Ω and offset voltage of 0.05 mV. The 3-dB cutoff frequency of the CCIIs when used as a voltage follower extends beyond 30 MHz. The power dissipation is 7.0 mW

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.13-19
• /
• 2003

In this paper, we studied on the characteristics of RCD(Residual Current Device) case deteriorated by tracking, and compared the tracked samples between in the site of fire($S_1$) and in the reappearance experiment($E_1$). This experiment is applied to IEC Publ. 112 method. Electrical fire by tracking occurred after scintillation and dry-band generated. The insulation resistance between source terminals of RCD case was about 25.7Ω in $E_1$ and the resistance was about 58.6Ω in $S_1$.The exothermic peaks of $E_1$ appeared at $491.0^{\circ}C$ and $603.2^{\circ}C$. The exothermic peak at $603.2^{\circ}C$ was shown by tracking. And the exothermic peak of $S_1$ appeared at $593.1^{\circ}C$. In spectrum of $S_1$ and $E_1$, absorption peak didn't appear at near 1590 cm$^{-1}$ .

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.1
• /
• pp.49-57
• /
• 2002

Including RF Package inductance, substrate coupling through conductive silicon(Si)-substrate is modeled and quantitatively characterized. 2-port substrate coupling model is extended for the characterization of multi-port substrate coupling between digital circuit block and analog/RF circuit block. Furthermore, scalable parameter extraction model is developed. Multi-port substrate coupling can be investigated by linearly superposing a frequency-dependent 2-port substrate coupling model using scalable parameters. In addition, Substrate coupling including RF package inductance effect is quantitatively investigated. It is shown that package effect increases substrate coupling and shifts a characteristic frequencies(i.e., poles) to the higher frequency range. The proposed methodology can be efficiently used to the mixed-signal circuit performance verification.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.187-192
• /
• 2018

This thesis is about the study of inverter terminal boxes in a explosion proof type exhaust fan that can control wind volume and operating time. In Korea, there is no ventilator to adjust the amount of wind and operating time when working in poor conditions. The purpose of the project is to create a explosion terminal box that can control the operating time and wind speed of a suitable explosion ventilator in hazardous environments. The two explosion-proof switches allow the operation time to be driven 1 hour, 3 hours and continuous time, and the speed of the induction motor rotation was set in 3 stages at 2000 rpm, 2600 rpm and 3000 rpm to control the volume. The tested motor used a half-horsepower barrier three-phase induction motor and a full-bridge inverter to set the desired flow rate and operating time.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.5
• /
• pp.317-324
• /
• 2022

In this paper, an analysis method that considers the initial static displacement of structural members using an equivalent single-degree-of-freedom system is presented. Newmark's dynamic analysis algorithm was improved to consider the effect of the initial static displacements of structural members. The effect of the initial static displacement on the maximum response according to the assumed duration of the blast load and natural period of the member was investigated. The effects of positive and negative static displacements on the maximum dynamic responses of structural members subjected to a positively applied blast load were also studied. Modified response charts for the shock-type and pressure-type waves are presented so that static displacements can easily be considered. Using a design example, we demonstrate the significance of the modified response chart that considers the static displacement. Based on the results of this study, the maximum response of a the structural member can be easily obtained whilst considering its initial static displacement. The modified response chart presented in this study can be used for the structural design of plants and military facilities.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.6
• /
• pp.939-946
• /
• 2018

In this work, we present simple schematics for a three-terminal graphene-based nanoelectromechanical switch with the vertical electrode, and we investigated their operational dynamics via classical molecular dynamics simulations. The main structure is both the vertical pin electrode grown in the center of the square hole and the graphene covering on the hole. The potential difference between the bottom gate of the hole and the graphene of the top cover is applied to deflect the graphene. By performing classical molecular dynamic simulations, we investigate the nanoelectromechanical properties of a three-terminal graphene-based nanoelectromechanical switch with vertical pin electrode, which can be switched by the externally applied force. The elastostatic energy of the deflected graphene is also very important factor to analyze the three-terminal graphene-based nanoelectromechanical switch. This simulation work explicitly demonstrated that such devices are applicable to nanoscale sensors and quantum computing, as well as ultra-fast-response switching devices.

• Journal of Korean Ophthalmic Optics Society
• /
• v.11 no.3
• /
• pp.159-164
• /
• 2006

Our study investigated the prevalence of allergic conjunctivitis and skin prick test reactivity and type of allergen from 1352 individuals living in Gwangyang city. The prevalence of allergic conjunctivitis symptom were 40,2% of study subjects and diagnosised subjects with allergic conjunctivitis of them were 15.8%. In skin prick test, 20.2% of total subjects had at least one positive skin prick reaction and positive skin prick reaction with allergic conjunctivitis of subjects was 21.3%(n=103). Their major allergens were indoor allergen like dermatophagoides pteronyssinus, Dermatophagoides farinae.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.389-392
• /
• 2000

본 연구에서는 1, 2단자쌍 회로망의 임피던스 정합회로를 간단하고 빠르게 구할 수 있는 방안을 개발하였다. 우선 회로망의 전체 전달함수를 F 행열로 부터 계산하고, 이를 이용하여 양단의 부하저항 및 정합회로가 포함된 각각의 단자의 입출력 임피던스를 구하였으며, 이 식으로부터 정합용 소자의 정확한 값을 계산하였다. 본 연구의 타당성을 검증하기 위해 CDMA용 소자로 널리 사용되는 중간주파수 대역 withdrawal 가중형 SAW 필터에 본 연구의 결과를 적용하여 임피던스 정합 전후의 특성변화를 시뮬레이션과 실험을 통하여 동시에 확인하였다 그 결과 85.38 MHz의 중심주파수에서 비대역폭이 $1.2\%$, 삽입손실이 29dB, VSWR이 80인 필터를 본 연구방법을 이용하여 정합 한 경우, 각각 $1.8\%$, 9dB, 3으로 향상됨을 시뮬레이션과 실험을 통해 확인하였다. 본 연구결과는 SAW 디바이스의 정합에 매우 용이하게 이용될 수 있을 뿐만 아니라 일반적인 1, 2단자쌍 회로망의 임피던스 정합에도 널리 사용될 수 있다

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.4691-4696
• /
• 2010

The This research paper deals with research on the 3D strip layout design of HEV UV terminal by utilizing the Cimatron Die Design, an automation module. To ensure smooth stamping of the product, strip layout was corrected for 33.5 degrees of slope, and blank layout of the double-width, 1-line, 1-pull out inner carrier was then optimized as a single arrangement. To mass-produce two different terminals from one common die, 3D strip layout design and die design were completed in 29 different processes.