• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.91-100
• /
• 2007

The most important thing for driver's safety on the road is equipment of crash cushion as a vehicle protection safety facility. But development of crash cushion is defective because there's no rational and reality way of design. And also without an alternative plan, it rely on crash test hereby it suffers a great economic loss and wastes time. This study that uses data of cash test proves the suitability of single degree of freedom which considers the safety of passengers about three-dimensional complicated Crash Analysis. As the study analyzes the conduct of crash cushion, it want to develop the effective method of design on Single Degree of Freedom Crash Cushion. And it presents the way of crash cushion design through making a crash analysis model with single degree of freedom. To verify the validness of the crash cushion plan, with single degree of freedom plan, we make the level CC2 crash cushion and execute the crash test. A performance test brings satisfied result and a plan of single degree of freedom crash cushion is proven as an one of the way to be a good system which can design crash cushion.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.335
• /
• pp.37-52
• /
• 2004

접지설비는 다른 설비에 비해서 단지 부속설비처럼 안이하게 취급하는 경우가 많다. 그러나 접지설비는 전로의 이상전압을 억제하고 지락시의 고장전류를 안전하게 대지로 흘려 인체의 보호나 화재, 기기의 손상 등의 재해를 방지하는 것뿐만 아니라 제어기기를 안정하게 동작시키는 등의 역할을 위한 필수불가결한 설비이다. 특히 최근 전자기기의 급격한 증가에 따라 안정된 신호계를 확보하기 위한 접지설비가 다양화, 혼재화하고 있다. 접지를 하여야 할 설비에는 전력설비, 정보$\cdot$통신설비(신호, 제어, 유무선통신, 컴퓨터 등), 피뢰설비(피뢰침, 피뢰도선, 가공지선 등)를 비롯하여 정전기 제거설비, 유도장해 방지설비 등 여러 가지 설비가 있다. 접지는 기본적으로 대지에 전기적 단자를 접속하는 것으로 즉, 금속 등의 도전성 물체를 대지와 전기적으로 접속하여 도전성물체의 전위를 대지와 같은 전위 또는 전위차를 최소화시키는 것을 말한다. 금속체와 대지를 접속하는 단자의 역학을 하는 것이 접지전극(Grounding electrode)이라고 하며 보통은 지중에 매설되어 있는 도체가 사용된다. 접지전극과 접지를 하는 설비를 연결하는 도선을 접지도선 또는 접지선(Grounding conductor)이라고 한다. 따라서 접지설비를 설계하기 위해서는 접지의 목적, 기능, 종류를 정확하게 이해하여 접지시스템을 구축함과 동시에 적절한 접지개소, 접지선, 접지극을 선정하고 시공하여야 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.693-696
• /
• 2005

Parallel and cross of the electrical power and telecommunication network is become accelerated, because telecommunication equipments are constructed according to road for efficient maintenance of domestic telecommunication network. The electrical power network can generate an electrostatic induction, and is itself transmission medium from electrical transient phenomenon such as lighting. So, transient phenomenon of lightning surge is induced to telecommunication network, and then it is damaged by connecting between electrical ground of electrical power network and telecommunication network. In this study, we found that cut-off of return path current by separate distance between electrical ground of electrical power network and telecommunication network, and cut-off of electrostatic induction voltage by grounding unused leads of both terminals of the electrical and telecommunication network have good effect as the protection methods of telecommunications network from electrical transient phenomena.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1965-1970
• /
• 2011

This paper proposes the method of switching function implementation using switching function extraction based on graph over finite fields. After we deduce the matrix equation from path number of directional graph, we propose the switching function circuit algorithm, also we propose the code assignment algorithm for nodes which is satisfied the directional graph characteristics with designed circuits. We can implement more optimal switching function compare with former algorithm, also we can design the switching function circuit which have any natural number path through the proposed switching function circuit implementation algorithms. Also the proposed switching function implementation using graph theory over finite fields have decrement number of input-output, circuit construction simplification, increment arithmetic speed and decrement cost etc.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.2 s.42
• /
• pp.7-15
• /
• 2005

Numerical analysis model is proposed to predict the dynamic behavior of a single-degree-of-freedom structure that is equipped with hybrid base isolation system. Hybrid base isolation system is composed of friction pendulum systems (FPS) and a magnetorheological (MR) damper. A neuro-fuzzy model is used to represent dynamic behavior of the MR damper. Fuzzy model of the MR damper is trained by ANFIS (Adaptive Neuro-Fuzzy Inference System) using various displacement, velocity, and voltage combinations that are obtained from a series of performance tests. Modelling of the FPS is carried out with a nonlinear analytical equation that is derived in this study and neuro-fuzzy training. Fuzzy logic controller is employed to control the command voltage that is sent to MR damper. The dynamic responses of experimental structure subjected to various earthquake excitations are compared with numerically simulated results using neuro-fuzzy modeling method. Numerical simulation using neuro-fuzzy models of the MR damper and FPS predict response of the hybrid base isolation system very well.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.4
• /
• pp.7-14
• /
• 1975

A significant new technique in the dsvelopment of micro-wave circuits is the process of untilization of coupled lines in the transverse electro-magnetic field. The bases for this technique are the application of even-and odd-mode characteristic impedances of the transmission line. This article describes the properties of directional couplers and explains a prccfdure usrd to design micro-strip directional couplers with the aid of the computer. The article also describes the experimental results obtained from seven microstrip couplers, which were built to verify the computer program and the approximate solutions. It can be seen that in cases at X-band where couplings of 10 to 20dB are required, the computer program and approximate solutions will produce good results.

• Journal of Plant Biotechnology
• /
• v.46 no.1
• /
• pp.32-36
• /
• 2019

Calla lilies (Zantedeschia spp.) are monocotyledonous ornamental plants which belongs to the Araceae family. After the release of elite calla cultivar, an efficient propagation system is needed for commercial use. Despite the use of conventional propagation methods such as splitting of tubers and rhizomes of calla, rapid and efficient propagation system should be developed. In order to achieve this goal, stem segments contained apical meristems derived from calla lily cultivar (cv. Gag-si) were cultured on Murashige and Skoog (MS) medium supplemented with various concentrations of cytokinin and auxin. This was aimed at inducing embryogenic calluses, shoots and multiple shoots. As a result, about 25% of induction rates of yellow embryogenic calluses were observed with MS medium containing both $0.5mg{\cdot}L^{-1}\;NAA$ and $1.5mg{\cdot}L^{-1}\;BA$ as growth regulators. In the experiments involving the regeneration from embryogenic calluses through shoot formation, MS medium supplemented with $0.5mg{\cdot}L^{-1}\;IAA$ and $2.0mg{\cdot}L^{-1}\;BA$ showed the highest rates at approximately 85 ~ 90% with regard to the formation of shoots in calla. Moreover, multiple shoots needed for rapid propagation were generated when explants were cultured on MS medium supplemented with $0.5mg{\cdot}L^{-1}\;IAA$ and $2.0mg{\cdot}L^{-1}\;BA$ with 40% of formation rate. In this study, the combination of auxin and cytokinin showed positive effects on both the induction of embryogenic calluses, the formation of shoots as well as multiple shoots in calla. The regeneration system described here can contribute to the development of breeding programs of calla in the future.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.2
• /
• pp.85-93
• /
• 2024

In this paper, we propose a method for establishing a state-space equation model for the motion analysis of floating structures subjected to wave loads, by applying system-identification techniques. Traditionally, the motion of floating structures has been analyzed in the time domain by integrating the Cummins equation over time, which utilizes a convolution integral term to account for the effects of the retardation function. State-space equation models have been studied as a way to efficiently solve floating-motion equations in the time domain. The proposed approach outlines a procedure to derive the target transfer function for the load-displacement input/output relationship in the frequency domain and subsequently determine the state-space equation that closely approximates it. To obtain the state-space equation, the method employs the N4SID system-identification method and an optimization approach that treats the coefficients of the numerator and denominator polynomials as design variables. To illustrate the effectiveness of the proposed method, we applied it to the analysis of a single-degree-of-freedom model and the motion of a six-degree-of-freedom barge. Our findings demonstrate that the presented state-space equation model aligns well with the existing analysis results in both the frequency and time domains. Notably, the method ensures computational accuracy in the time-domain analysis while significantly reducing the calculation time.

• Journal of the Korean Magnetics Society
• /
• v.19 no.2
• /
• pp.52-56
• /
• 2009

Interlayer coupling field, coercivity, magnetoresitance ratio, and magnetic sensitivity depending on the thickness of free CoFe layer for the CoFe/Cu/CoFe/IrMn multilayer are investigated. In case of CoFe layer of $30\;{\AA}$ thickness for the CoFe(t)/Cu($25\;{\AA}$)/CoFe($60\;{\AA}$)/IrMn($80\;{\AA}$) multilayer with ferromagnet/non-magnet/ferromagnet structure induced by IrMn layer, the lowest coercivity and the highest magnetic sensitivity, which is contained soft magnetic property, are observed. On the other side, in case of CoFe layer of $90\;{\AA}$ thickness, there are the highest coercivity and the lowest magnetic sensitivity. The fabricated CoFe($30\;{\AA}$)/Cu($25\;{\AA}$)/CoFe($60\;{\AA}$)]/IrMn($80\;{\AA}$) spin valve device with $2{\times}8{\mu}m^2$ patterning size are measured by two probe method, which is selected the sensing current as the longitudinal direction and the easy axis as the transversal direction. The measuring magntoresistance ratio and magnetic sensitivity of GMR-SV device having the soft magnetic property are 3.0% and 0.3%/Oe, respectively.