• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.138-141
• /
• 2003

본 논문에서는 STTD(space Time Transmit diversify)를 적용한 적응변조 시스템의 성능을 분석하였다. 무선채널 환경에서는 지연파에 의한 ISI(Intersymbol interference)간섭으로 인해 전송 오율을 증가시키게 된다. 따라서, ISI간섭의 영향을 줄이기 위해 STTD를 적용함으로써 적응변조시스템의 성능개선 정도를 분석하였다. 결과에 의하면, STTD를 적용함에 따라 더 낮은 SNR에서도 변조 다치수가 높은 변조 모드를 선택함으로써 고속ㆍ고품질의 데이터 전송이 가능함을 알 수 있었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.635-637
• /
• 2002

본 논문에서는 차세대이동통신에서 고속·고품질 전송을 실현하기 위해, 전송환경에 맞게 최적의 변조 다치 수를 선택하는 적응변조방식에 에러 정정 부호기법을 제안하였다. 고속ㆍ고품질화의 한 방법으로서, 에러 정정 부호를 적응한 시스템을 생각할 수 있는데, 본 논문에서 방식은 변조 파라미터가 변화하는 것에 의해 적응변조방식에 효과적인 BCH 부호 기법 및 RS 부호 기법을 적용한 경우의 전송 품질을 검토하였다.

• Information and Communications Magazine
• /
• v.9 no.2
• /
• pp.60-68
• /
• 1992

본 전송시스템은 현재 일본 NTT에서 개발 (4.5.6G-400M 방식(方式))하여 마이크로파대의 중계회선에 실용하고 있는 세계 최초이며 최첨단의 디지탈, 전송기술이다. 여기서는 본 방식의 개요 및 주요기술등에 대해서 일본의 현황을 중심으로 하여 간단히 요약해서 고찰하고자 한다. 디지털 변조시스템인 256QAM초다치변조 기법을 개발하여, 한중계기로 400Mbit/s 의 대용량 전송을 하는 방식이므로 기존방식에 비해서 전송용량을 배증하고, 디지탈통신 시스템이면서 종래의 아나로그 FM 통신을 능가하는 주파수 이용효율을 갖는것이 특징이다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.411-416
• /
• 2003

In this paper, We analysed performance of adaptive modulation system with STTD. Transmission error of system is increased by ISI according to delay wave in wireless channel environment. Therefore, We analysed performance that it is applied adaptive modulation system with STTD to reduce ISI's effect. As a results, Data transmission of high speedㆍhigh quality could know possible by applying adaptive modulation system with STTD. Because of selected high modulation mode in low SNR.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.216-225
• /
• 2007

This paper presents bit splitting methods to apply multilevel modulation to iterative codes such as turbo code, low density parity check code and turbo product code. Log-likelihood ratio method splits multilevel symbols to bits using the received in-phase and quadrature component based on Gaussian approximation. However it is too complicate to calculate and implement hardware due to exponential and log calculation. therefore this paper presents Euclidean, MAX and Sector method to reduce the high complexity of LLR method. We propose optimal bit splitting method for three iterative codes.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.7 s.110
• /
• pp.615-622
• /
• 2006

DVB-S2 offers various coding rate and modulation schemes. Therefore this paper proposes bit split methods to applying to multilevel modulation. Log-likelihood ratio method splits multilevel symbols to soft decision symbols using the received in-phase and quadrature component based on Gaussian approximation. However it is too complicate to calculate and to implement hardware due to exponential and logarithm calculation. Therefore this paper presents Euclidean, MAX and Sector method to reduce the high complexity of LLR method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11C
• /
• pp.682-693
• /
• 2011

Energy spreading transform (EST) based modulation is an effective technique to combat frequency-selective fading in broadband wireless communication. It performs close to the inter-symbol interference (ISI)-free matched filter bound (MFB) only at the complexity of a linear detector. Originally, EST-based modulation has been proposed for QPSK. However, to fully utilize the capacity of multipath fading channels, higher-order modulations are also necessary. In this paper, we review the EST based modulation that has originally been proposed for QPSK and discuss its extension to 8 PSK and 16 QAM. The performance of the extended system is verified through simulation in Proakis B and 8-tap fading channel. The EST based modulation for 8 PSK shows the performance which is very close to MFB and the EST based modulation for 16 QAM shows the performance gap between its receiver and MFB.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.495-498
• /
• 2004

In the sound insulation measurements, the influence of background (extraneous) noise is often serious problem and how to reduce its effect and to improve the signal-to-noise(S/N) ratio is an important theme. As the background noise, such extraneous noises as road traffic noise and machine noise often disturb the measurement. In laboratory measurements on specimens with high sound insulation performances, even the internal noise of the measurement system can become a problem. To improve the signal-to-noise ratio and to improve the measurement accuracy, various kinds of digital signal processing techniques can be applied. In this paper, four kinds of digital signal processing techniques are applied and their effectiveness is examined by a simple sound insulation measurement.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.441-444
• /
• 2004

In the sound insulation measurements, the influence of background (extraneous) noise is often serious problem and how to reduce its effect and to improve the signal-to-noise(S/N) ratio is an important theme. As the background noise, such extraneous noises as road traffic noise and machine noise often disturb the measurement. In laboratory measurements on specimens with high sound insulation performances, even the internal noise of the measurement system can become a problem. To improve the signal-to-noise ratio and to improve the measurement accuracy, various kinds of digital signal processing techniques can be applied. In this paper, four kinds of digital signal processing techniques are applied and their effectiveness is examined through field measurements.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1654-1665
• /
• 2008

This paper presents bit splitting methods to apply multilevel modulation to iterative codes such as turbo code, low density parity check code and turbo product code. Log-likelihood ratio method splits multilevel symbols to soft decision symbols using the received in-phase and quadrature component based on Gaussian approximation. However it is too complicate to calculate and to implement hardware due to exponential and logarithm calculation. Therefore this paper presents Euclidean, MAX, sector and center focusing method to reduce the high complexity of LLR method. Also, this paper proposes optimal soft symbol split method for three kind of iterative codes. Futhermore, 16-APSK modulator method with double ring structure for applying DVB-S2 system and 16-QAM modulator method with lattice structure for T-DMB system are also analyzed.