• Journal of the Korean Solar Energy Society
• /
• v.23 no.3
• /
• pp.81-91
• /
• 2003

본 연구에서는 복층으로 구성된 $WSio_2Al$ 금속절연체의 상세를 보여주고 있는데, 금속과 절연체의 합성물질은 태양 흡수율의 설계와 열적인 현상을 보여주기 위해 종종 사용된다. 금속의 접착기면 위에 얇은 복층 코팅으로 구성되는 디자인은 태양 스펙트럼의 파장권역에서 선택적 흡수를 위함이다. 본 연구는 태양 복사의 열성능 평가를 위해 금속과 절연체 필름의 방사율, 태양흡수율, 코팅순서, 미 반사층(AR)의 두께, 코팅 두께와 코팅 면수, 전체 코팅 두께 등에 대해 시뮬레이션 하였다. 그 결과 네 겹의 코팅설계에서 $Sio_2AR$ 75 nm 두께와 각각의 층에서 $0.5\sim0.7$의 가변 금속부분 구성이 가장 우수한 성능을 갖는 것으로 나타났다. 또한 시뮬레이션으로 금속과 절연체 합성물의 최적의 구성과 각각의 코팅 두께에 대한 예측이 가능했으며, 최대 태양흡수율은 0.94, 방사율은 0.115의 금속과 절연체의 합성물을 구성할 수 있었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.872-879
• /
• 2017

This work presents a cable fault monitoring system based on the differential frequency domain reflectometry using a compact impedance analyser which is composed of a direct digital synthesizer, an op amp and a gain/phase detector with a micro controller. The proposed system can replace expensive vector network analysers for frequency domain reflectometry and therefore be deployed in sensor networks for long term multi-point cable monitoring. Effectiveness of the system is experimentally confirmed by diagnosing the status of the power cable.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.455-458
• /
• 2005

옴니(omnidirectional)-PBG(photonic bandgap)의 크기는 쌍을 이루는 광자결정 재료의 고유 굴절률, 충진율 및 두께에 의해 결정되는 것이 일반적이다. 그러나 광자결정체가 다중주기를 가지도록 제작하면 옴니-PBG의 크기를 변화 시킬 수 있다. 본 연구에서는 Si/$SiO_2$를 기본 구조로 하는 광대역 옴니-PBG용 광자결정 구조를 설계, 제작하고 그 특성을 평가 하였다. 각각 단일 주기 $\Lambda_1$(426.9nm) 및 $\Lambda_2$(306.9nm)를 갖는 8N-Si/$SiO_2$ 광자결정에 대해 TE/TM-편광광 $5^{\circ}$ 및 $45^{\circ}$ 입사각에 대한 반사-스펙트라 측정결과는 설계값과 일치하였다. 특히 이중주기 $(8N\cdot{\Lambda}_1+8N\cdot{\Lambda}_2)$를 갖도록 제작된 Si/$SiO_2$ 광자결정은 입사각 $5^{\circ}$의 TE-편광광 반사-스펙트라 측정결과, 약 1050-2500nm의 광대역 파장범위에서 광자 밴드 갭을 보였다.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.139-147
• /
• 2021

This paper introduces an image decomposition-based deep learning method and loss function to improve low-light images. In order to remove color distortion and halo artifact, illuminance channel of an input image is decomposed into reflectance and luminance channels, and a decomposition-based multiple structural deep learning process is applied to each channel. In addition, a mixed norm-based loss function is described to increase the stability and remove blurring in reconstructed image. Experimental results show that the proposed method effectively improve various low-light images.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.110-110
• /
• 2021

사회적, 환경적으로 크고 작은 문제를 일으키는 녹조현상은 수생태계에서 1차 생산자로 없어서는 안 될 조류의 과대 성장으로 인해 주로 나타난다. 담수조류는 크게 녹조류, 남조류, 규조류 3종으로 나누어지며, 특히 남조류는 계절별 천이에 따른 발생 시 과대 성장하는 특성으로 인해 녹조현상에 가장 큰 원인이 된다. 이러한 녹조현상의 원인에 따라 환경부에서는 발령기준 항목을 chl-a와 남조류 세포수에서 2016년 이후 남조류 세포수 만으로 발령기준 항목을 개정하였다. 따라서, 녹조현상에 대한 신속한 대처를 위해서는 남조류에 대한 분포에 대해 파악하는 것이 가장 우선시 되며 이를 위해 신속한 모니터링을 필요로 한다. 하지만 현재 조류 모니터링을 위해서는 직접 채수를 통한 검경 또는 Lisst, YSI와 같은 직접 계측 센서를 활용하여 모니터링을 진행을 하고 있으며 이러한 점, 선 단위의 측정은 전반적인 조류 분포 및 현황에 대하여 파악과 신속한 모니터링에 한계가 있다. 이러한 한계에 대안으로 위성영상, 다중분광 및 초분광 영상을 활용한 면단 위의 원격 모니터링을 통해 신속하고 하천 내 전반적인 조류 농도 분석을 위한 연구가 다양하게 진행되고 있다. 본 연구에서는 UAV를 활용한 초분광센서를 이용하여 하천과 일정한 반사율을 가지는 반사천을 촬영하고 취득한 초분광영상 보정 및 분석을 진행하였다. 최적 밴드 비를 산정하고 YSI를 통한 Chl-a 결과를 이용하여 분광 특성별 맵핑을 통한 공간적 분포의 조류 농도를 산정하고자 한다.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_3
• /
• pp.1299-1312
• /
• 2019

As land remote sensing applications are expanding to the extraction of quantitative information, the importance of atmospheric correction is increasing. Considering the difficulty of atmospheric correction for land images, it should be applied when it is necessary. The quantitative information extraction and time-series analysis on biophysical variables in land surfaces are two major applications that need atmospheric correction. Atmospheric aerosol content and column water vapor, which are very dynamic in spatial and temporal domain, are the most influential elements and obstacles in retrieving accurate surface reflectance. It is difficult to obtain aerosol and water vapor data that have suitable spatio-temporal scale for high- and medium-resolution multispectral imagery. Selection of atmospheric correction method should be based on the availability of appropriate aerosol and water vapor data. Most atmospheric correction of land imagery assumes the Lambertian surface, which is not the case for most natural surfaces. Further BRDF correction should be considered to remove or reduce the anisotropic effects caused by different sun and viewing angles. The atmospheric correction methods of optical imagery over land will be enhanced to meet the need of quantitative remote sensing. Further, imaging sensor system may include pertinent spectral bands that can help to extract atmospheric data simultaneously.

• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.491-499
• /
• 2003

The Okinawa Trough is a rift basin formed by extension. Analysis of multichannel seismic reflection profiles from the northwestern margin of the northern Okinawa Trough reveal that the trough is characterized by a series of tilted fault blocks bounded by listric normal faults and half-grabens developed between blocks, showing typical rifted structures. The trough display three kinds of sedimentary sequences with different seismic reflection characteristics: prerift, synrift and postrift sediments. The prerift sequence develops parallel to the dip direction of tilted fault blocks. The synrift sediments, mostly deposited in the half-grabens between tilted fault blocks, are generally well characterized by divergence of the reflectors towards the blocks indicating contemporaneous deposition during tilting. The postrift sediments are featured by continuous and parallel reflectors. The width of the half-graben and the throw-displacement rate of the basin bounding fault are closely connected. The throw-displacement rate is the maximum when the rifting event is the most active and the width of the half-graben is proportional to the rate.

• Korean Journal of Optics and Photonics
• /
• v.27 no.4
• /
• pp.133-142
• /
• 2016

This paper presents the design and simulation of a three-dimensional pixel-by-pixel scanning light detection and ranging (LIDAR) system with a microelectromechanical system (MEMS) scanning mirror and direct sequence optical code division multiple access (DS-OCDMA) techniques. It measures a frame with $848{\times}480$ pixels at a refresh rate of 60 fps. The emitted laser pulse waves of each pixel are coded with DS-OCDMA techniques. The coded laser pulse waves include the pixel's position in the frame, and a checksum. The LIDAR emits the coded laser pulse waves periodically, without idle listening time to receive returning light at the receiver. The MEMS scanning mirror is used to deflect and steer the coded laser pulse waves to a specific target point. When all the pixels in a frame have been processed, the travel time is used by the pixel-by-pixel scanning LIDAR to generate point cloud data as the measured result.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.20 no.5
• /
• pp.645-651
• /
• 2010

Recently the need for advanced security technologies are increasing as the occurrence of intelligent crime is growing fastly. Previous liveness detection methods are required for the improvement of accuracy in order to be put to practical use. In this paper, we propose a new fake image detection method using pupil reflection. The proposed system detects eyes based on multi-scale Gabor feature vector in the first stage, and uses template matching technique in oreder to increase the detection accuracy in the second stage. The template matching plays a role in determining the allowed eye area. The infrared image that is reflected in the pupil is used to decide whether or not the captured image is fake. Experimental results indicate that the proposed method is superior to the previous methods in the detection accuracy of fake images.

• Journal of Convergence for Information Technology
• /
• v.8 no.2
• /
• pp.83-90
• /
• 2018

We have studied the optimal conditions for design and development on the communication device for a bilateral, and it's electrodes for transmitting electric signal are constructed on the $36^{\circ}$ rotated $LiTaO_3$ substrate by evaporating Al-Cu(W 30%) alloy. At first, we manufactured three kind of samples using this method, and selected two samples as similar with frequency, ripple and passband characteristics, and then we connect two samples by series in order to make bilateral devices. As results, we obtained that the electrode structure has better characteristics then the others, when it's width of reflector and electrode are $1{\lambda}/4$, $1{\lambda}/12$ respectively, and it's frequency is approximately 190.3MHz. Near future, I hope to help the manufacture for communication devices for the multi-channel and the duplex filter.