• The KIPS Transactions:PartB
• /
• v.15B no.4
• /
• pp.269-274
• /
• 2008

In this paper, we propose a new stereo correspondence method for generating excellent external energy for snake-based object segmentation methods in stereo images. Our method first generates an edge-based disparity map by performing stereo correspondence between multi-level edge maps of the stereo image pair. Only edges of similar strength are considered for matching. To filter the disparity map for edges of the object of interest, the method estimates the object's disparity value by matching the pattern of edges of the region of interest in the left image against candidate patterns in the right image. The filtered edge map is then used to generate external energy for the snake. The proposed method has been tested on two snake models and results show a noticeable enhancement on performance of the snake when compared with other methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.7 s.337
• /
• pp.71-78
• /
• 2005

A K-Best algerian is known as optimal for implementing the maximum-likelihood detector (MLD), since it has a fixed maximum complexity compared with the sphere decoding or the maximum-likelihood decoding algorithm. However the computational complexity of the K-Best algrithm is still prohibitively high for practical applications when K is large enough. If small value of K is used, the maximum complexity decreases but error flooring at high SNR is caused by error propagation. In this paper, a K-reduction scheme, which reduces K according to each search level, is proposed to solve error propagation problems. Simulations showed that the proposed scheme provides the improved performance in the bit error rate and also reduces the average complexity compared with the conventional scheme.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.58-65
• /
• 2015

This paper presents the design of an implantable stimulation IC intended for neural prosthetic devices using $0.18-{\mu}m$ standard CMOS technology. The proposed single-channel biphasic current stimulator prototype is designed to deliver up to 1 mA of current to the tissue-equivalent $10-k{\Omega}$ load using 12.8-V supply voltage. To utilize only low-voltage standard CMOS transistors in the design, transistor stacking with dynamic gate biasing technique is used for reliable operation at high-voltage. In addition, active charge balancing circuit is used to maintain zero net charge at the stimulation site over the complete stimulation cycle. The area of the total stimulator IC consisting of DAC, current stimulation output driver, level-shifters, digital logic, and active charge balancer is $0.13mm^2$ and is suitable to be applied for multi-channel neural prosthetic devices.

• Journal of IKEEE
• /
• v.8 no.2 s.15
• /
• pp.172-180
• /
• 2004

In this paper, a parallel Input/Output modulo multiplier, which is applied to AOTP(All One or Two Polynomials) multiplicative algorithm over $GF(3^m)$, has been proposed using neuron-MOS Down-literal circuit on voltage mode. The three-valued input of the proposed multiplier is modulated by using neuron-MOS Down-literal circuit and the multiplication and Addition gates are implemented by the selecting of the three-valued input signals transformed by the module. The proposed circuits are simulated with the electrical parameter of a standard $0.35{\mu}m$CMOS N-well doubly-poly four-metal technology and a single +3V supply voltage. In the simulation result, the multiplier shows 4 uW power consumption and 3 MHzsampling rate and maintains output voltage level in ${\pm}0.1V$.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.10
• /
• pp.43-53
• /
• 2014

Gunnery has been used to detect and classify artilleries. In this paper, we used electro-optical data to get the information of muzzle flash from the artilleries. Feature based approach was applied; we first defined features and sub-features. The number of sub-features was 38~40 generic sub-features, and 2 model-based sub-features. To classify multiclass data, we introduced tree structure with clustering the classes according to the similarity of them. SVM was used for each non-leaf nodes in the tree, as a sub-classifier. From the data, we extracted features and sub-features and classified them by the tree structure SVM classifier. The results showed that the performance of our classifier was good for our muzzle flash classification problem.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.3
• /
• pp.192-199
• /
• 2018

This paper proposes an improved discrete Fourier transform spread single sideband(DFT-s-SSB) orthogonal frequency division multiplexing(OFDM) system that solves the problems of conventional DFT-s-SSB OFDM systems. Conventional DFT-s-SSB systems use pulse amplitude modulation(PAM) for applying SSB modulation. The higher the modulation level, the worse is the BER performance. Further, transmission is possible only through the lower sideband(LSB) spectrum. When transmitting using the LSB and upper sideband(USB) spectra simultaneously, interference occurs and spectrum recovery is not performed correctly. To solve this problem, the proposed system applies the 2/3 convolution coding to improve the bit error rate(BER) performance, adjusts the DFT size, and selects the USB spectrum to utilize the remaining spectrum resources. In addition, when using this system in an environment that supports multiuser or limited bandwidth, it uses only half of the spectrum; therefore, it can utilize the remaining spectrum resources and improve the spectral efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.744-749
• /
• 2016

This paper presents the design of a computer-generated hologram for beam control of an LCOS-based wavelength selective switch, which is the core technology for next-generation ROADM. By introducing a computer-generated hologram instead of general grating patterns to control the LCOS device, we contribute to building a more efficient wavelength selective switch. With the use of phase modulation properties of LCOS devices, we designed the hologram for five-port output and a 40-channel wavelength selective switch. We applied a multi-level phase modulation technique with the Gerchberg-Saxton algorithm to produce the hologram, which is easily scalable to any different type of wavelength selective switch. With an experimental setup, we verified the usability of the hologram designed for five-port output. We also suggest a hologram design technique for beam control of a 40-channel wavelength selective switch.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.707-714
• /
• 2012

After a single-stage, second-order, multiple-feedback ${\Delta}-{\Sigma}$ modulator and a two-stage, second-order MASH ${\Delta}-{\Sigma}$ modulator were analyzed and simulated using Simulink and Matlab and their characteristics were compared, the following result was obtained: 1) The two ${\Delta}-{\Sigma}$ modulators do not have group delay distortion. 2) The characteristics of the noise shaping are nearly identical. As a result of the noise shaping, the power spectral densities have slope of 40 dB/dec. 3) There was no spurious tone. 4) The input range of the two modulators is from -1 to +1 in common. 5) Because the output of the two-stage MASH modulator is 2-bits (4-levels), design of frequency dividers and charge pumps of PLL are more demanding.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.509-516
• /
• 2018

TCP is a well-known communication protocol which is widely used for reliable message transmissions. The urgent mechanism of TCP plays a key role to transmit messages with a high priority. If a high priority message occurs at the transmitting node, the urgent mechanism informs the receiving node about the presence of a high priority message prior to its transmission so that the receiving node can be prepared for handling this message in advance. This implies that the existing urgent mechanism of TCP does not guarantee an immediate or faster delivery of the high priority message itself. Therefore, the ability of priority-based transmission is required on TCP not only to ensure reliable transmissions of normal messages but also to offer a differentiated service according to the priority of message. This paper presents a priority-based transmission algorithm over TCP using a priority queue in a multi-threaded environment. The effectiveness of the proposed algorithm is explored using an experimental setup in which various messages with different priority levels are transmitted.

• The KIPS Transactions:PartB
• /
• v.11B no.1
• /
• pp.35-44
• /
• 2004

Web contents created for desktop screens give rise to problems when they are to be displayed on the small screens of mobile terminals. While in some cases some of the objects of a page may not be displayable due to the lack of browser capability, the entire page may not be displayable due to the incompatibility with the browser in other cases. In this paper, we introduce a new mobile content adaptation approach based on web clipping, which transforms an original page into one that is optimally displayed on a mobile terminal. In this method, a source page is automatically clipped and transformed according to the clip specification made by the content provider using a clip editing tool. The clip editing tool allows the user to specify group clips, multi-level cups and dynamic clips as well as simple clips, and the presentation layout through a graphic user interface. Based on the clip specifications, each clip is transformed into an intermediate meta-language document, which in turn is transformed into a presentation page in the target markup language. Transcoding of image objects in major image file formats is also supported.