• 제목/요약/키워드: 다이아몬드 와이어쏘

검색결과 8건 처리시간 0.025초

양면발파법 및 다이아몬드 와이어쏘를 이용한 채석 시스템 연구 (A Study on the Quarrying System by Two-face Rock Blasting and Diamond Wire-saw)

  • 홍기표;류창하;선우춘;최병희;한공창
    • 화약ㆍ발파
    • /
    • 제18권3호
    • /
    • pp.49-58
    • /
    • 2000
  • 본 논문은 양면발파에 의한 채석기술에서 주로 양면발파 장약패턴 및 다이아몬드 와이어쏘절삭기술에 관한 내용을 중심으로, 현재 각 석재광산에서 시행하고 있는 채석기술과 연구소 에서 시행한 현장 시험발파 결과를 기술한 것이다. 첫째, DA석재광산에서는 제트버너를 이용하여 자유면을 형성하고, 일면발파법과 양면발파법의 작업시간을 비교한 결과 양면 발파할 때에 37%이상의 작업시간 절약효과가 있었으며, 인원은 36%이상의 감소효과가 있었다.둘째, DH석재광산에서는 다이아몬드 와이어쏘를 이용하여 자유면을 형성하고 양면발파 작 업시간과 타 광산에서 일반적으로 사용하고 있는 제트버너에 의한 양면발파 작업시간을 비교하였을 때에 21%이상의 절감효과가 있었고, 작업인원도 21%이상의 감소효과가 있었다. 다이아몬드 와이어쏘를 이용하여 양측면에 자유면을 형성하고 양면 발파하는 채석기술은 소음 및 분진에 의한 환경공해를 방지할 수 있었으며, 작업공정 및 경제성 면에서도 매우 유 리하나 실패시 다른 채석기술에 비해 모암의 손상으로 인한 경제적 손실이 커질 수 있다는 단점도 있으므로 정밀한 발파설계 및 기술이 필요하다.

  • PDF

새로운 다이아몬드 와이어 쏘 절단 기술 개발에 관한 실험적 검증 (An Experimental Verification on the Development of an Innovative Diamond Wire Saw Cutting Technology)

  • 박종협;주백석
    • 한국기계가공학회지
    • /
    • 제17권6호
    • /
    • pp.83-90
    • /
    • 2018
  • This paper introduces a innovative diamond wire saw cutting technology and its experimental verification that can be utilized for cutting heavy structures. While conventional diamond wire saw cutting technologies such as water cooled cutting method and dry cutting method cause severe environmental problems due to generating massive concrete sludge or dust scattering, the proposed method can eliminate those problems considerably. Through extensive experiments using heavy structure test bed and real bridge pier structure, comprehensive analysis and comparative evaluation about various cutting methods were performed. As a result, the innovative diamond wire saw cutting method could achieve a similar cutting and cooling performance to the water cooled cutting method without generating concrete sludge and it showed an improved cutting and cooling performance to the dry cutting method without dust scattering. Consequently it is confirmed that the suggested cutting technology can be a promising environment-friendly alternative in the field of heavy structure dismantling.

태양전지용 실리콘 웨이퍼의 멀티 와이어 쏘잉 시 절삭저항력에 관한 연구 (A Study on Cutting Force during Multi Wire Sawing of Silicon Wafers for Solar Cells)

  • 황인환;박상현;안국진;권대근;이종찬
    • 한국기계가공학회지
    • /
    • 제15권3호
    • /
    • pp.66-71
    • /
    • 2016
  • Reducing the wafer breakage rate and sawing thinner wafers will decrease the cost of solar cells. This study was carried out in order to identify ways to achieve this goal. In this study, the cutting force characteristics using an ingot tilting-type diamond multi wire-sawing machine were analyzed. The cutting force was analyzed while varying the tilting angles and wire speed. The obtained data were analyzed by classifying the tangential cutting force and the normal cutting force. In this cutting force experiment, the difference between the forces was confirmed; it was found that it rises with increasing the tilting angles and decreases when the wire speed elevates. The resulting value can be utilized as basic data for the determination of an ideal cutting recipe.

와이어쏘 공정에서 다이아몬드 입자의 인성지수가 절단 성능에 미치는 영향 (Effect of Toughness Index of Diamond Abrasives on Cutting Performance in Wire Sawing Process)

  • 김도연;이태경;김형재
    • 한국산업융합학회 논문집
    • /
    • 제23권4_2호
    • /
    • pp.675-682
    • /
    • 2020
  • Multi-wire sawing is the prominent technology employed to cut hard material ingots into wafers. This paper aimed to research the effect of diamond toughness index on the cutting performance of electroplated diamond wire. Three different toughness index of diamond abrasives were used to manufacture electroplated diamond wires. The cutting performance of electroplated diamond wire is verified through experiments, in which sapphire ingot are cut using single wire sawing machine. A single wire saw for constant load slicing is developed for the cutting performance evaluation of electroplated diamond wire. Choosing the cutting depth, total cutting depth, cutting force and wear of electroplated diamond wires as evaluation parameters, the performance of electroplated diamond wire is evaluated. The results of this study showed that there was a significant direct relationship between the toughness index of diamond abrasives and the cutting performance. Results demonstrated that diamond abrasive with a high toughness index showed higher cutting performance. However, all diamond abrasives showed similar cutting performance under low load conditions. The results of this paper are useful for the development of cutting large diameter ingots and cutting high hardness ingots at high speed.

PHC 파일 원커팅 두부정리 자동화 장비의 상세설계 및 구조적 타당성 분석 (Detail Design and Structural Stability Analysis for Automated PHC Pile Cutting Machine)

  • 염동준;황지영;박예슬;김영석
    • 한국건설관리학회논문집
    • /
    • 제19권2호
    • /
    • pp.117-125
    • /
    • 2018
  • PHC 파일의 두부정리 작업은 안전성, 품질의 균일성, 작업 생산성 측면에서의 개선이 반드시 필요하며, 이를 개선하기 위한 자동화 등 대안마련이 시급하다. 본 연구의 목적은 상기 문제점을 개선할 수 있는 PHC 파일 원커팅 두부정리 자동화 장비의 상세 설계 및 구조적 타당성 분석을 수행하는 것이다. 이를 위해 현장 전문가 설문조사 및 AHP 분석을 통해 핵심 요소기술을 선정하고, 상세설계 및 구조적 타당성 분석을 수행하였다. 핵심 요소기술 선정 결과, PHC 파일 절단위치 센싱 기능에서는 광학식 방식(4.338), PHC 파일 절단 기능에서는 다이아몬드 와이어 쏘(3.984), PHC 핸들링 기능에서는 회전형 집게(4.090)가 선정되었으며, 구조적 타당성 분석 결과, 그립부 및 그립부 거치 샤프트에서 각각 항복강도 대비 15.93%, 10.58%의 최대응력이 발생하여 구조적으로 매우 안정한 것으로 분석되었다. 본 연구를 통해 도출된 상세설계 및 구조적 타당성 분석 결과는 실제 PHC 파일 원커팅 두부정리 자동화 장비 시제품 개발에 활용될 예정이며, 이론적 고찰 및 기술적 타당성 분석의 결과가 충분히 반영된 시제품이 될 것이기 때문에 그 실용화 가능성이 높을 것으로 기대된다.

원전해체 시 콘크리트 구조물 절단을 위한 밀기형 절단장치 개발 (Development of the Pushing Type Cutting Device to Dismantle Concrete Structure for Decommissioning of Nuclear Power Plant)

  • 이봉재;권용규;홍창동;이동원;민경남
    • 방사성폐기물학회지
    • /
    • 제18권1호
    • /
    • pp.103-111
    • /
    • 2020
  • 콘크리트 구조물 절단에 사용되고 있는 다이아몬드 와이어 쏘가 장착된 당김형 절단 장치의 단점을 개선하여 밀기형 절단장치를 개발하였다. 개발된 밀기형 절단장치에는 먼지 집진 커버가 부착되며 마찰열을 냉각하기 위한 건식이나 습식방법을 선택할 수 있다. 개발된 절단장치의 동작특성과 집진 먼지의 누설률 측정을 실험하였다. 시험결과 원활한 동작특성을 보였으며, 먼지의 누설률은 1.7%인 것으로 나타났다. 개발된 절단장비를 사용하여 생물학적 차폐 콘크리트 절단 시 작업자의 내부 피폭선량을 평가하였다. 보수적 평가를 위해 노심 중심부분을 절단하는 경우를 가정하였다. 비방사능이 99.5 Bq·g-1인 누설 먼지로 인해 반면마스크를 착용한 작업자의 예탁유효선량은 0.25 mSv로 평가되었다. 개발된 밀기형 절단장비 사용 시 미량의 먼지 누설률로 인해 작업자의 방사선 피폭이 저감되며, 사용의 편리성으로 세부 절단 계획을 수립할 수 있어 방사성 콘크리트 폐기물 감량에도 기여할 수 있다. 따라서 원전의 방사화된 생물학적 차폐 콘크리트를 비롯하여 철근 콘크리트 구조물 해체 작업 시 절단 장비로서 사용될 수 있을 것이다.