Browse > Article
http://dx.doi.org/10.21289/KSIC.2020.23.4.675

Effect of Toughness Index of Diamond Abrasives on Cutting Performance in Wire Sawing Process  

Kim, Do-Yeon (Precision Mechanical Process and Control R&D Group, Dongnam Division, Korea Institute of Industrial Technology)
Lee, Tae-Kyung (Precision Mechanical Process and Control R&D Group, Dongnam Division, Korea Institute of Industrial Technology)
Kim, Hyoung-Jae (Precision Mechanical Process and Control R&D Group, Dongnam Division, Korea Institute of Industrial Technology)
Publication Information
Journal of the Korean Society of Industry Convergence / v.23, no.4_2, 2020 , pp. 675-682 More about this Journal
Abstract
Multi-wire sawing is the prominent technology employed to cut hard material ingots into wafers. This paper aimed to research the effect of diamond toughness index on the cutting performance of electroplated diamond wire. Three different toughness index of diamond abrasives were used to manufacture electroplated diamond wires. The cutting performance of electroplated diamond wire is verified through experiments, in which sapphire ingot are cut using single wire sawing machine. A single wire saw for constant load slicing is developed for the cutting performance evaluation of electroplated diamond wire. Choosing the cutting depth, total cutting depth, cutting force and wear of electroplated diamond wires as evaluation parameters, the performance of electroplated diamond wire is evaluated. The results of this study showed that there was a significant direct relationship between the toughness index of diamond abrasives and the cutting performance. Results demonstrated that diamond abrasive with a high toughness index showed higher cutting performance. However, all diamond abrasives showed similar cutting performance under low load conditions. The results of this paper are useful for the development of cutting large diameter ingots and cutting high hardness ingots at high speed.
Keywords
Wire saw; Electroplated Diamond Wire; Diamond Abrasive; Toughness Index; Cutting;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Y. Chiba, Y. Tani, T. Enomoto, H. Sato, "Development of a High-Speed Manufacturing Method for Electroplated Diamond Wire Tools," CIRP Annals, vol. 52, no. 1, pp. 281-284, (2003).   DOI
2 D. Y. Kim, H. J. Kim, S. J. Lee, H. D. Jeong, "Effect of Initial Deflection of Diamond Wire on Thickness Variation of Sapphire Wafer in Multi-Wire Saw," International Journal of Precision Engineering and Manufacturing-Green Technology, vol. 2, no. 2, pp. 117-121, (2015).   DOI
3 R. Knoblauch, D. Boing, W. L. Weingaetner, K. Wegener, F. Kuster, F. A. Xavier, "Investigation of the Progressive Wear of Individual Diamond Grains in Wire Used to Cut Monocrystalline Silicon," Wear, vol. 414, pp. 55-58, (2018).
4 H. J. Kim, D. Y. Kim, C. M. Kim, H. D. Jeong, "Multi-Wire Sawing of Sapphire Crystals with Reciprocating motion of Electroplated Diamond Wires," CIRP Annals, vol. 62, no. 1, pp. 335-338, (2013).   DOI
5 A. Gupta, C. A. Chen, H. W. Hsu. "Study on Diamond Wire Wear, Surface Quality, and Subsurface Damage during Multi-Wire Slicing of C-plane Sapphire Wafer," The International Journal of Advanced Manufacturing Technology, vol. 100, pp. 1801-1814, (2019).   DOI
6 Q . Wu, Z. L iu, B. " Experim ental research o n tension balance control of reciprocating winding diamond wire saw," Int J Adv Manuf Technol, vol. 91, pp. 423-431, (2017).   DOI
7 J. R. Davis, ASM Specialty Handbook: Tool Materials, ASM International, pp. 109, (1995).
8 M. S. Baek, H. S. Park, J. I, Lee, K. A. Lee, "Effect of Diamond Particle Size on the Microstructure and Wear Property of High Pressure High Temperature (HPHT) Sintered Polycrystalline Diamond Compact (PDC)," Korea J. Met. Mater., vol. 55, no. 11, pp. 790-797, (2017).   DOI
9 P. Cichosz, "Economic aspects of cutting with diamond-coated wire," Archives of Civil and Mechanical Engineering, vol. 8, no. 4, pp. 5-14, (2008).   DOI