• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.436-439
• /
• 2007

This paper describes the optimization of PGS(Patterned Ground Shield) of 5.5 turns rectangular spiral inductor using Taguchi's method. PGS is decrease method of parasite component by silicon substrate among dielectric loss reduction method. By using the taguchi's method, each parameter is fixed upon that PGS high poison(A), slot spacing(B), strip width(C) and overlap turn number(D) of PGS design parameter. Then we verified that percentage contribution and design sensitivity analysis of each parameter and level by signal to noise ratio of larger-the-better type. We consider percentage contribution and design sensitivity of each parameter and level, and then verify that model of optimization for PGS is lower inductance decreasing ratio and higher Q-factor increasing ratio by EM simulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.9
• /
• pp.1368-1383
• /
• 2004

Robust design has been developed with the expectation that an insensitive design can be realized. That is, a product designed by robust design should be insensitive to external noises or tolerances. Robust design can be classified into three methods: (1) The Taguchi method (2) robust optimization (3) robust design by the axiomatic approach. In this paper, each method is reviewed and investigated. Pros and cons fur each method are discussed and a future direction for development is proposed.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1362-1365
• /
• 2003

On this study. we improved the efficiency applying algorithm that is repeatedly using orthogonal array in discrete design space and filling a defect of gradient method in continuous design space. we showed optimal ply angle that maximized buckling strength of CFRP laminated composite plate without a hole and with a hole by each aspect ratio. In the case of CFRP laminated composite plate without a hole, we confirmed the reliance and efficiency of algorithm in comparison with the result optimization achievement repeatedly using statistical orthogonal array of experimental design.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.4 no.4
• /
• pp.14-20
• /
• 2005

This paper deals with the study of feasibility of rotary carbide tools in the machining of aluminium alloy. A rotary tool holder was designed and manufactured for this work. Experiments were performed using Taguchi methods and regression analysis to analyse the influence of various factors and their interactions on the cutting characteristics of rotary carbide tools during machining. The cutting force is influenced the most greatly at the inclination angle. The surface roughness is influenced distinctly at depth of cut. It deduced an equation to predict cutting force and surface roughness. Hence, it could be concluded here that the proposed model agrees with the experimental data satisfactorily.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1483-1486
• /
• 2003

Injection mold is a manufacturing process used to produce the various parts of complicated shape at a low cost. Many factors such as, section shape, resin and mold temperature, filling time, etc, affect on the quality of injection part during injection molding process. The precent study, was carried out the shrinkage analysis of shoes injection mold to optimize runner shape based on filling and packing pressure with MoldFlow. Taguchi design and analysis of variance are used to optimize injection mold design.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.6
• /
• pp.28-34
• /
• 2008

Mg alloy is widely used for the IT, auto and consumer electronics industries. Semi-solid casting(SSC) of magnesium alloys is used to produce high quality components. SSC process is analogous with the injection molding of plastics. The high strength and low weight characteristics of magnesium alloys render the high-precision fabrication of thin-walled components with large surface areas. To produce thin-walled magnesium alloy parts, SSC process parameters on the quality of the finished product should be clearly studied. In this paper, to select optimal process parameters, Taguchi method is applied to the optimal design of the process parameters in the SSC process. The die temperature, injection velocity and barrel temperature of the SSC process are selected for the process parameters. The effectiveness of the optimal design is verified through the CAE software.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.6
• /
• pp.405-412
• /
• 2002

Recently, regulations of the government and concerns of people give rise to the interest in exhaust and intake noise of passenger car as much as other vehicles. In these demands, performance prediction software with hybrid method was developed at first. Secondly, robust design was used for improving the noise reduction capacity of intake system with the performance prediction software. On the basis of the existing design, length and radios of each component that was thought to effect on the capacity of intake system was selected. The factors were arranged by using L18 table of orthogonal array and optimum value was obtained.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1366-1367
• /
• 2008

구형 집속 빔 핵융합 장치에서 발생되는 중성자 생성률은 이온전류의 크기에 크게 의존한다. 본 논문에서는 이온전류의 크기를 증가시키기 위해 구조 설계에 주로 이용되는 다구찌 실험계획법을 이용하여 최적의 설계 조건을 계산하였다. 최적화를 위해 그리드 음극 형상의 결정인자 및 압력을 설계 변수로 선택하였고, 설계변수가 이온전류의 크기에 미치는 영향력을 분석하여 최적의 조건을 도출하였으며, 예측된 최적 조건 변수값을 적용하여 효과를 검증하였다. 최적 모델로부터 더 큰 이온전류를 얻을 수 있었으며, 이는 더 깊은 포텐셜 우물에서 측정되었다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1410-1411
• /
• 2008

본 연구에서 인덕터에 PGS를 삽입함으로써 인덕터의 품질계수를 향상하여 LNA의 잡음 지수 특성 향상에 대해 연구하였다. 인덕터의 품질계수를 향상시키기 위해 다구찌 실험계획법을 이용하여 인덕터에 삽입되는 PGS의 도체 면적이 최소화 할수록 품질계수를 높일 수 있다. PGS가 없는 인덕터와 PGS를 삽입한 인덕터를 LNA에 적용 시뮬레이션 하였다. PGS가 없는 인덕터 보다는 PGS가 있는 인덕터를 사용함으로써 LNA의 전력 이득과 잡음 지수 특성을 향상시킬 수 있음을 확인하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.4
• /
• pp.31-38
• /
• 2012

In this paper, we selected primary cutting parameters that influence on surface roughness of cut bottom surface in end-milling for SM25C material. Those are overhang, depth of cut, feed rate and spindle speed. And then performed orthogonal array experiment and ANOVA by Taguchi method to determine that improved level combination of cutting parameters for betterment of working efficiency and surface roughness one of quality characteristics. And we verified a advisability of prediction model by verification test about level combination. From the results, main cutting parameter influences on surface roughness is spindle speed and the next is feed rate.