References
- Lee, S. H. and Lee, S. H., "Optimization of Experimental Parameters for Burr Minimization", Proceedings of KSMTE Autumn Conference, pp. 225-229, 2000.
- Lim, S. H., Kim, J. H., Lee, W. R. and Park, J. S., "Optimum selection of machining parameters of Wire Electrical Discharge Machining using Taguchi method", Proceedings of KSMTE Autumn Conference, pp. 123-128, 2001.
- Kim, N. H., "The Selection of the Optimal Condition of Plug using the Taguchi Method", J. of KSMPE, Vol. 10, No. 6, pp. 109-114, 2011.
- Lim, P. and Yang, G. E., "Optimal Cutting Condition of Tool Life in the High Speed Machining by Taguchi Design of Experiment", J. of KSMPE, Vol. 5, No. 4, pp. 59-64, 2006.
- Chun, S. H. and Ko, T. J., "Study on the dynamic stiffness variation of boring bar by Taguchi Method", J. of KSMPE, Vol. 8, No. 3, pp. 98-104, 2009.
- Kilickap, E., "Modeling and optimization of burr height in drilling of Al-7075 using Taguchi method and response surface methodology", Int. J. Adv. Manuf. Technol., Vol. 49, pp. 911-923, 2010.
- Thamizhmanii, S., Saparudin, S. and Hanson, S., "Analyses of surface roguhness by turning process using Taguchi method", J. of AMME, Vol. 120, pp. 503-506, 2007.
- Jang, S. M. and Cho, M. W., "A Study on the effect of cutting parameters in face turning based on the Taguchi method", Proceedings of KSMTE Spring Conference, pp. 111-116, 2003.
- Park, J. M., Choi, W. S., Kwon, S. H. and Cha, J. H., "Optimal Cutting Conditions of Surface Roughness for Inconel 718 Alloy in Turning Operation", J. of KSMPE, Vol. 8, No. 4, pp. 48-53, 2009.
- Sahoo, A. K. and Sahoo, B., "Surface roughness model and parametric optimization in finish turnig using coated carbide insert : Response surface methodology and Taguchi approach", International Journal of Industrial Engineering Computations, Vol. 2, pp. 819-830, 2011.
- Gopalsamy, B. M., Monal, B. and Ghosh, S., "Taguchi method and ANOVA : An approach for process parameters optimization of hard machining while machining hardened steel", J. of Scientific & Industrial Research, Vol. 68, pp. 686-695, 2009.
- Lee, C. K., "A Study on Working Condition for Optimum Surface Roughness of End-milling using Design of Experiment", A master's thesis of Dong-A University, 2003.
- Phadke, M. S., "Quality engineering using robust design", Min Young Sa, pp. 23-48, 2001.