• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.199-206
• /
• 2002

The application of GSIS for most route determination is provided by selecting several basic data such as land use, land construction quantity and land price, and then establishing a database to analyze for the route determination. However, this strategy rarely considers the complicated multi-factors that are essential for route determination. To solve this problem, it is required to use the GSIS and attempt to support the decision of majority for optimum route determination and standardize the route determination procedure. Accordingly, in this study, the qualification of multi-factors was attempted using the AHP technique, and so the data for the route determination was provided effectively, which resulted in the optimum route determination. As a result of applying the AHP technique, optimum routes were selected more rationally than randomly applying the values of multi-factors as before.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.407-412
• /
• 2005

본 연구에서는 노선선정 시 요구되고 있는 방대한 자료와 결정요소 등을 선택하여 의사결정체계인 계층분석과정을 이용하여 합리적인 노선선정의 방법을 제시하고 이를 평가하고자 하며, 이렇게 수행된 노선선정 결과를 지혈공간정보체계를 이용하여 시각화 및 분석하고자 한다. 구체적인 적용방법은 계층분석과정으로 선정된 평면선형을 분석하고 그것을 기반으로 종단선형의 설계를 종단경사 변화에 의한 다각적인 방법으로 분석하여 합리적인 노선선정을 도출하여 평가하고자 한다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.2
• /
• pp.127-138
• /
• 1991

This is a study on the selection of the optimum route using geographic information system. In general, the selection of route was classifed in order of candidate route zone, optimum route zone and optimum route, this study comes under optimum route that is the last part in the route planning. The optimum route is get attined on the weighted matrix table that based on landuse status, land value, slope degree of each grid cell of the test area, and also we suggest application possibility of geographic information system in the route planning with the comparision and analysis of the three selection route in this study.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2003.05a
• /
• pp.316-321
• /
• 2003

The bus as a feeder trip should supply equality service to the whole community. But in spite of the change of latent demand to the bus by the variety of regional structural change, the existing bus route can not supply effective feeder service. For cope with the latent demand to the bus, this study establish a concept that frame the feeder bus route design system for changing of the existing bus route or creating of bus route. The concept of feeder bus route design system from this study is not to frame the whole bus network but to frame the single route to a unit OD pair. So, this study have assumption that do not consider the wating time at bus stop and transfer time. This system is consist of three phase. First is limitation of examination road network, second is enumeration of a most suitable route, and final is determination of the optimum bus route. However, a precondition is that the necessary time from the origin to the destination is brief, and having many demand.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.19 no.2
• /
• pp.137-146
• /
• 2001

Route selection needs the analysis function of GSIS to analyze and manipulate a lot of spatial information efficiently. Therefore, it needs the linkage of system requiring the knowledge and the experience of experts as a method that can estimate each quantitative route for an efficient route selection. In this study, the route selection model through construction and analysis procedure of position information using GSIS were presented, and route selection system linked with expert system was developed. This system is easy to be used and managed for presenting route alignment according to conditions as a graphic user interface environmental window system by applying three tiers based object-oriented method. Using GSIS, the various information required for route selections in database was constructed, the characteristics of subject area by executing three-dimensional terrain analysis was grasped effectively, and the control point through buffering, overlay and location operation was extracted. Three alternative routes between a beginning point and an end point inputted by route selection system were selected. Therefore, the applications of the route selection system are presented by applying this system to the real study area.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.479-484
• /
• 2003

In the case of the feeder bus route choice, it is more desirable to choose the route by treating as a single route linked from origin to destination than the whole network. This study is to establish a concept that frames the feeder bus route choice technique for the change of the existing single bus route or the creation of the new feeder bus route. The concept of the feeder bus route choice technique in this study is not to frame the whole bus network but to frame a single route to a unit O-D pair. So, this study has the assumption that does not consider the waiting and transfer time at the bus stop. This system technique consists of the following phases: I) limitation of the road network examined for the study, ii) enumeration of the appropriate candidate routes by the permissive route length, and iii) determination of the optimum bus route by the route evaluation value.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.159-179
• /
• 2006

By using the current road design method that is based on the regulation about structure and facilities standard of the road and the route plan guide of a national road and the alignment optimization road design method which is studied in the inside and outside of country, this study operate the route plan of the sample study and compare and analysis the route character, consequently the current design method has local optimization that is formed the plan by the stage and the section. Alignment optimization road design has the system optimal route search. But cost function has limite that caused by construction parameter that is not included in cost function. So we design a road route included cost function in main fields. As a result, we obtain a realistic and economically road route. The alignment optimization road design model has to be made up some problems, like the change of vertical gradient in the tunnel section, though this defects it has a lot of merits as a geometric design tool, especially in the feasibility study and the scheme design.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.3
• /
• pp.487-496
• /
• 2018

In route selection process of NIMBY facilities, many conflicts occur due to route selection procedure and NIMBY syndrome. Especially, the social conflicts surrounding the site selection and operation are frequent enough to account for 70% of the total conflict cases, causing significant losses. To resolve the conflict in route selection, social conflicts are considered. Therefore, this study proposes an improved process of selecting route considering social conflicts in the power transmission line. First, the analysis of previous research trends and interviews with experts revealed the improved exclusion zone criteria, the factors and priorities of NIMBY facilities. After selecting the candidate routes, the optimal route is selected by using Fuzzy-TOPSIS. Hence, 83.3% of six experts have verified that this model minimizes conflicts and has sufficient applicability. The proposed model is expected to be used as a tool to minimize social conflict in the selection process of the power transmission line in the early stage of the project.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.1-6
• /
• 2003

Route selecting of the road is a basic and important process. But the route selecting process must consider the technical, traffic and environment factor simultaneously. The optimum route that are able to reduce the construction cost, maximize utility value and investigate several alternative route must be selected. This study presents a reasonable plan for route selecting through subjective evaluation and classify the methods linked GIS from basic design of road construction.

• Journal of Korean Society of Transportation
• /
• v.21 no.6
• /
• pp.17-26
• /
• 2003

주간선도로의 ITS 사업 등 동적정보의 제공이 최근 도로이용자에게 제공되고 있으나, 지방부의 정적인 정보를 제공하는 도로표지는 아직도 안내기능이 취약한 것이 사실이다. 지방부 도로를 대표하는 지방도는 연장에 있어서 모든 도로를 통해서 최장이며 고속국도, 국도, 국가지원지방도와 함께 복잡한 도로망을 형성하고 있다. 즉, 도로의 대종을 차지하는 지방도는 아직도 정적정보제공기반도 취약하다는 것이며, 증가하는 수요에도 불구하고 길 찾기의 기능이 가장 미흡한 도로가 지방도이다. 이러한 지방도의 경우 같은 위계의 지방도 간에도 노선연장 및 지역적 차이가 크며, 노선의 연속성 또한 미약하다. 이러한 지방도 도로안내체계의 문제를 해결하기 위해 본 연구에서는 노선별 적절한 안내지명을 선정하고, 선정된 지명을 통해 도로안내 및 표지간의 연계성을 유지하기 위한 도로표지시스템을 개발하는 것이 목적이다. 이동에 있어 중추적 기능을 수행하는 도로가 아닌 지방도는 장거리 통행을 위한 위계 높은 도로와의 연계가 필수적인 만큼 본 연구에서는 도로표지규칙의 지방도 안내지명 선정에 대한 선정원칙을 재검토하고, 지방도의 적절한 안내지명 선정을 위해서 타 노선과의 연계유형을 분석하였다. 분석결과 9가지의 유형을 도출하였고, 도출된 노선연계 유형을 기반으로 노선별 거점을 선택하는 것으로 하였다. 한편, 안내지명에 대한 설문을 실시하였고, 그 결과 각 노선별 거점을 중요지와 주요지로 구분하여 정의, 선정하여 안내를 위한 기본 틀을 제시하였다. 제시된 안내지명서정요령 및 틀을 통해 지방도내의 및 지방도와 기타도로와의 연계성이 더욱 고조되고, 안내체계의 효율성의 증대가 기대된다.