• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.11a
• /
• pp.225-226
• /
• 2006

본 논문에서는 PWR 사용후핵연료의 처분용기를 원가대상으로 단위당 제조원가를 추정하였다. 추정결과, 처분용기의 내부는 구상흑연주철로 외부는 순동판으로 후판 제작하였을 경우, KDC-1 처분용기의 단위당 제조원가는 약 2억 3천만원으로 추정되었다. 또한 외부용기를 순동 주물로 제조하였을 경우는 단위당 제조원가가 약 2억 1천만원으로 추정되었다. 그리고 외부용기를 후판제작 할 경우, 총 제조원가 대비 각 제조원가의 2대 요소별로 비율을 살펴보면, 직접재료비는 38%, 직접 노무비 50%, 제조간접비 12%로 추정되었다. 따라서 한국형처분장 개념설계에서 36,000tU을 처분하는데 소요되는 처분용기 14,210개중 PWR 처분용기 11,375개를 고려하였을 경우, 처분용기 총 원가는 사용후핵연료 처분 총 원가의 주요한 원가동인임을 확인하였다.

• Proceedings of the Safety Management and Science Conference
• /
• 2001.11a
• /
• pp.187-191
• /
• 2001

본 논문의 목적은 안전성과와 경영성과의 영향관계를 체계적으로 설명할 수 있는 모형을 개발하고, 근로자수 300인 이상인 기업 43개와 300인 미만인 30개 기업을 구분해서 개발한 모형을 실증적으로 분석함으로써 모델의 타당성을 분석하는데 있다. 안전성과에 대한 변수는 노동부산하의 한국산업안전공단에서 집계한 재해자 수와 근로손실일 수를 선정하였으며, 경영성과에 대한 자료는 (주)한국신용정보와 (주)매일경제에서 출간하는 상장기업분석자료를 근거로 하여 1인당매출액을 선정하고 조절변수로 사용된 노무비, 경비, 부채비율, 수출비중을 업계평균에 비해 상대적으로 높고 낮은 정도를 높은 기업은 1, 낮은 기업은 0의 값을 지정하여 실증분석을 실시하였다. 이를 통하여 기업의 특성요인들에 따라 안전성과가 경영성과에 미치는 영향이 다르다는 본 연구의 이론적 모델은 근로자 수가 300인 이상인 국내 대기업의 경우에는 그 타당성을 지닌다고 볼 수 있었다.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.1
• /
• pp.108-114
• /
• 2012

Escalation method examining the changes in price index has been widely utilized in public construction projects. The previous escalation method determined estimated changes in price based on the average unit price of contract items over a period of time. In relation to this method, the issue has been raised that the fluctuation rates of previous method show different trends compared with other related price indices, as the influence of the small group of contract items with large unit prices overwhelms the others. This research suggested an improved escalation method which estimates the fluctuation rate by examining the changes in CCI (construction cost index) and applies it to the total amount or the partial amount deducted for labor cost in price escalation for previous bid price method. To verify the improvement, a case study is conducted on an educational facility, and the fluctuation rate was estimated in two different base periods (short term, long term). The results over the long term showed similar tendencies to those of related price indices, as well as significant differences in fluctuation rates compared to those of the previous method.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.1
• /
• pp.11-19
• /
• 2014

The Construction industry is a labor-intensive industry that its labor cost takes up about 30~40% out of the whole construction cost. However, due to a stereotype that on-site work is a 3D job there is a shortage of the labor forces. Modular construction method is to produce modular units in the plant so that workers could work stably. Also, after delivering the module from plant to the site, there will be only installment to be required that shortens construction duration. Even though the modular market is currently expanding based on military facilities in Korea, its best strengths are not demonstrated well which are shortened construction period and low cost. It also causes labor problem of production due to minimum utilization of the modular construction method. Multi-skilled labor means a technician that is able to perform more than two kinds of work with more than two techniques. Multi-skilled labor can proceed smoothly by figuring out the connectivity between the precedent and following operations. Therefore, this research is to apply the concept of Multi-skilled labors, suggest solutions and allocate manpowers efficiently. As a result, it helps to decrease idle manpowers during the operation and the total labor forces can be saved. Low cost is the original strength of the modular which can stand out so the modular market is expected to expand.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.4 s.16
• /
• pp.69-79
• /
• 2003

About 93$\%$ of domestic teal estate construction firms registered as the end of 2001 recorded net profits of only less than 500 million won(including firms in the red) for the term. As a result of having analyzed the ratios of sales costs and the structural ratios of sales costs for the past 10 years, it was found that there have been great changes in structural ratios of sales costs. Material costs and labor costs have gradually decreased, but outsourcing costs of processing have greatly increased. In order to find activity points which are fundamental to cost control, the methods of new activity based cost management have been pursued. The characteristics of real estate construction industry lie in the fact that contract prices (sales in) are fixed and amounts of profits differ depending on the use of costs. In order to create maximum profits from fixed contract prices, the new activity based cost management has been proposed. The control of operation budgets and management costs is designed to control their schedules and expenses in different respects. Operation budgets ate executed with specific activities and management costs are controlled as a form of material costs, labor costs, out sourcing costs and expenses which are details of expenditure. In order to execute them by using the methods of new activity based cost management, first of all, we have to analyze what activity drivers ale and how much added values such activities can create. It is considered as a method of cost management which is necessary far the survival management of real estate construction industry.

• Journal of Nutrition and Health
• /
• v.52 no.1
• /
• pp.73-89
• /
• 2019

Purpose: This study was conducted to identify the dietary life and nutritional status of Korean elementary school students according to breakfast frequency and to clarify the relationship between breakfast frequency of elementary school students and parental dietary and social environmental factors. Methods: This study used data from the 2013 ~ 2015 Korea National Health and Nutrition Examination Survey (KNHANES VI). The subjects were 1,325 elementary school students aged 6 to 11 years old. Subjects were categorized into two groups: a skipping breakfast group (ate breakfast 0 ~ 4 times per week), eating breakfast group (ate breakfast 5 ~ 7 times per week) by sex and grade (lower grade: 1st ~ 3rd/upper grade: 4 th ~ 6 th). Results: Among upper grade boys and girls, the skipping breakfast group had a higher rate of childhood obesity than the eating breakfast group. In lower grade boys, the mothers of the skipping breakfast group had higher rates of economic activity and eating breakfast alone without family members than the mothers of the eating breakfast group. For lower grade boys and girls and upper grade boys, the skipping breakfast group had a higher rate of parents who did not eat breakfast than the eating breakfast group. The energy intake of the breakfast consumed by all subjects was less than 25% of the Estimated Energy Requirements (EER). Moreover, for upper grade boys and girls, the skipping breakfast group had a higher rate of subjects whose daily intake was below the Estimated Average Requirement (EAR) for iron than the eating breakfast group. Conclusion: Breakfast frequency of elementary school students was related to childhood obesity. The frequency of eating breakfast among elementary school students was related to the dietary life factors of parents such as breakfast frequency and dietary condition. Intake for breakfast was less than 25% of the EER, while the skipping breakfast group had a higher rate of subjects whose daily intake was below the EAR for iron than the eating breakfast group. Therefore, it is necessary to consider diverse forms of policy support such as opening nutrition education programs for parents and practicing morning meals at school for elementary school students to provide regular and balanced breakfasts.

• Journal of the Korean Geographical Society
• /
• v.43 no.3
• /
• pp.337-357
• /
• 2008

This study examines the characteristics of population ageing and the employment of aged workers in Seoul. Population indexes such as aged/child ratio and longevity degree are analyzed to identify the time-spatial changes and differentiation of population ageing by Gu. Job offerers, job seekers and employees related to the aged workers are also analyzed using data from Center of Job Placement for the Aged in Seoul. The results indicate that population ageing of Seoul has progressed faster than other regions in recent years. In addition, regional differences in tendency of population ageing is obvious even within Seoul. The percentage of unskilled laborer is much higher in Seoul compared with other regions. There is geographical differentiation in employment of aged workers among regions within Seoul. The employment opportunity of the aged is high in core economic areas of Seoul, while low in the outer residential area. This shows geographical mismatch between job offerers and seekers, which means that it is difficult for aged workers to get the jobs near to their residence. Accordingly, governmental support and intervention is needed considering their lower mobility.

• Korean journal of communication and information
• /
• v.78
• /
• pp.141-176
• /
• 2016

This study investigates changes of market structure from 2001 to 2015 in the Korean daily newspaper industry using concentration and mobility measures. The main empirical results are as follows. First, the industry's total asset shows a U-shaped trend, despite the downward trend of the industry's total sales revenue. Second, the market concentration, measured in terms of assets, shows the trend of an inverted-U shape. The relatively small firms, measured in terms of assets, have on average gained in market share while the relatively large firm have lost. Third, market concentration, measured in terms of sales revenues, shows a U-shaped trend. the relatively small firms, measured in terms of sales revenues, have on average gained in market share while the relatively large firm have lost. My central argument has been that it is desirable to supplement traditional concentration measures with mobility statistics and trend analyses in investigating and regulating market structure.

• Korean Business Review
• /
• v.19 no.1
• /
• pp.25-34
• /
• 2006

This research executed research that analyze construction cost and profitability through construction example of direction and subcontracting construction based on common private construction less than 3 billion. The results of this research, is summarized as follows. (1) Analyzed profitability about construction gross and operating profit of direction and subcontracting construction. The construction gross profit rate is 15.2% direction construction, subcontracting construction was analyzed by 1.3% high by 16.5% subcontracting construction, and the operating profit rate is 9.4% direction construction, subcontracting construction was construed by 2.3% high by 11.7% subcontracting construction. (2) Analyzed profitability about operating profit before and after deduction of 4 insurance cost of direction construction. The direction construction operating profit rate is 9.4% before deduction of 4 insurance cost, after deduction was construed that is 7.3% and operating profit rate difference after and before deduction was construed that is 2.1%. Therefore, subcontracting construction (operating profit rate 11.7%) was analyzed that last operating profitability after 4 insurance cost deduction produces more 4.4% about direction construction.

• Korean Journal of Construction Engineering and Management
• /
• v.2 no.3 s.7
• /
• pp.101-109
• /
• 2001

Application of system form is very effective to continuous horizontal or vertical walls of the apartment housing. Though the system forms that are used in the construction field have the advantage of concrete quality improvement and increasing number of usages, there are some problems in reaching early planning scheduling goal due to schedule delay and low productivity. This study is initiated to solve the problem and suggest some improvements searching for reasons that diminish the productivity. A case study was done in apartment construction field where system form was used and the productivity is analyzed by work sampling. Finally, productivity improvements for assembly of the form, internal form and external form are suggested, respectively.