• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.30-32
• /
• 2000

본 논문에서는 RTL 회로의 데이터패스에 대한 테스트 용이도 분석방식과 테스트 용이화 설계방식을 제안한다. 데이터패스에 대한 테스트 용이도 분석은 콘트롤러에 대한 정보없이 RTL 회로의 데이터패스만으로 수행한다. 본 논문에서 제안한 테스팅을 고려한 설계방식은 내장된 자체 테스트(BIST)나 주사(scan)방식이 아니며, 주사 방식을 적용했을 때에 비해 본 논문에서 제안한 테스트 용이화 설계방식을 적용했을 때에 보다 적은 면적 증가율(area overhead)을 보인다는 것을 실험을 통해 확인하였다. 또한, 회로 합성 후 ATPG를 통해 적은 면적 증가만으로 높은 고장 검출율(fault coverage)을 얻을 수 있음을 보인다.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.9
• /
• pp.2378-2387
• /
• 1998

This thesis proposes a design algorithm of an efficient space response compactor for Built-In Self-Testing of VLSI circuits. The proposed design algorithm of space compactors can be applied independently from the structure of Circuit Cnder Test. There are high hardware overhead cost in conventional space response compactors and the fault coverage is reduced by aliasing which maps faulty circuit's response to fault-free one. However, the proposed method designs space response compactors with reduced hardware overheads and does not reduce the fault coverage comparing to conventional method. Also, the proposed method can be extended to general N -input logic gate and design the most efficient space response L'Ompactors according to the characteristies of output sequence from CUT. The prolxlsed design algorithm is implemented by C language on a SUN SPARC Workstation, and some experiment results of the simulation applied to ISCAS'85 benchmark circuits with pseudo random patterns generated bv LFSR( Linear Feedback Shift Register) show the efficiency and validity of the proposed design algorithm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.7
• /
• pp.74-80
• /
• 2002

VLSI intergrated circuits like SOC(system on chip) often require a multi-clock design style for functional or performance reasons. The problems of the clock domain transition due to clock skew and clock ordering within a test cycle may result in wrong results. This paper describes a new BIST(Built-in Self Test) architecture for multi-clock systems. In the new scheme, a clock skew is eliminated by a multi-capture. Therfore, it is possible to perform at-speed test for both clock inter-domain and clock intra-domain.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.122-130
• /
• 2013

The demand and the supply are increasing sharply in accordance with the growth of the Memory Semiconductor Industry. The Flash Memory above all is being utilized substantially in the Industry of smart phone, the tablet PC and the System on Chip (SoC). The Flash Memory is divided into the NOR-type Flash Memory and the NAND-type Flash Memory. A lot of study such as the Built-In Self Test (BIST), the Built-In Self Repair (BISR) and the Built-In Redundancy Analysis (BIRA), etc. has been progressed in the NOR-type fash Memory, the study for the Built-In Self Test of the NAND-type Flash Memory has not been progressed. At present, the pattern test of the NAND-type Flash Memory is being carried out using the outside test equipment of high price. The NAND-type Flash Memory is being depended on the outside equipment as there is no Built-In Self Test since the erasure of block unit, the reading and writing of page unit are possible in the NAND-type Flash Memory. The Built-In Self Test equipped with 2 kinds of finite state machine based structure is proposed, so as to carry out the pattern test without the outside pattern test equipment from the NAND-type Flash Memory which carried out the test dependant on the outside pattern test equipment of high price.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.6
• /
• pp.72-84
• /
• 2000

The test patterns for path delay faults consist of two patterns. So in order to test the delay faults, a new weight generation algorithm that is different from the weight generation algorithm for stuck-at faults must be applied. When deterministic test patterns for weight calculation are used, the deterministic test patterns must be divided into several subsets, so that Hamming distances between patterns are not too long. But this method makes the number of weight sets too large in delay testing, and may generate inaccurate weights. In this pater, we perform fault simulation without pattern partition. Experimental results for ISCAS 89 benchmark circuits prove the effectiveness of the new weight generation algorithm proposed in this paper.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.2
• /
• pp.114-121
• /
• 2013

As the weight of embedded memory within Systems-On-Chips(SoC) rapidly increases to 80-90% of the number of total transistors, the importance of testing embedded memory in SoC increases. This paper proposes IEEE std. 1500 wrapper based Programmable Memory Built-In Self-Test(PMBIST) architecture which can support various kinds of test algorithm. The proposed PMBIST guarantees high flexibility, programmability and fault coverage using not only March algorithms but also non-March algorithms such as Walking and Galloping. The PMBIST has an optimal hardware overhead by an optimum program instruction set and a smaller program memory. Furthermore, the proposed fault information processing scheme guarantees improvement of the memory yield by effectively supporting three types of the diagnostic methods for repair and diagnosis.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.72-82
• /
• 2014

Recently, the size of semiconductor industry market is constantly growing, due to the increase in diffusion of smart-phone, tablet PC and SSD(Solid State Drive). Also, it is expected that the demand for TLC NAND-type flash memory would gradually increase, with the recent release of TLC NAND-type flash memory in the SSD market. There have been a lot of studies on SLC NAND flash memory, but no research on TLC NAND flash memory has been conducted, yet. Also, a test of NAND-type flash memory is depending on a high-priced external equipment. Therefore, this study aims to suggest a structure for an autonomous test with no high-priced external test device by modifying the existing SLC NAND flash memory and MLC NAND flash memory test algorithms and patterns and applying them to TLC NAND flash memory.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1069-1072
• /
• 1998

Recently the development of design and automation technology and manufacturing method, has reduced the cost of chip, but it becomes more difficult to test IC chip because test technique doesn't keep up with these techniques. In case of IC testing, obtaining test vectors to be able to detect good chip or bad one is very important, but according to increasing complexity, it is very complex and difficult. Another problem is that during testing, there could be capability of physical and electrical damage on chip. Also there is difficulty in synchronization between CUT (circuit under test) and Test equipment〔1〕. Because of these difficulties, built in self test has been proposed. Not only obtaining test vectors but also reducing test time becomes hot issues nowadays. This paper presents a new test BIST(built in self test) method. Proposed BIST implementation reduces test time and obtains high fault coverage. By searching internal nodes in which are inserted test_point_cells〔2〕and allocating TPG(test pattern generation) stages, test length becomes much shorter.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.8
• /
• pp.10-22
• /
• 1998

To handle the density increase of SRAMs, a new parallel testing methodology based on built-in self test (BIST) is developed, which allows to access multiple cells simultaneously. The main idea is that a march algorithm is dperformed concurently in each baisc marching block hwich makes up whole memory cell array. The new parallel access method is very efficient in speed and reuqires a very thny hardware overhead for BIST circuitry. Results show that the fault coverage of the applied march algorithm can be achieved with a lower complexity order. This new paralle testing algorithm tests an .root.n *.root.n SRAM which consists of .root.k * .root.k basic marching blocks in O(5*.root.k*(.root.k+.root.k)) test sequence.

• Annual Conference of KIPS
• /
• 2013.05a
• /
• pp.705-708
• /
• 2013

정보의 보안이 중요해지는 이 시점에 모바일이나 태블릿을 통한 악성 코드 및 기밀 유출이 증가하고 있다. 회사나 정부 기업쪽에서도 자체 기밀을 보호하기 위하여 많은 노력을 하고 있지만 개인 휴대품에 대한 보안은 아직 미흡한 실정이다. 본 연구에서는 모바일과 개인 태블릿에 관한 보안을 앱을 통한 것이 아닌 내장 프로그램으로 적용시켰다. 또한 일정 범위 내에서 조절할 수 있게 하여 보안 유출을 미연에 방지 할 수 있는 MDS 라이브러리 테스트 프로그램을 설계 및 구현을 한다.