• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.7 s.100
• /
• pp.851-858
• /
• 2005

The response characteristics of one to one resonance on the quadrangle cantilever beam in which basic harmonic excitations are applied by nonlinear coupled differential-integral equations are studied. This equations have 3-dimensional non-linearity of nonlinear inertia and nonlinear curvature. Galerkin and multi scale methods are used for theoretical approach to one-to-one internal resonance. Nonlinear response characteristics of 1st, 2nd, 3rd modes are measured from the experiment for basic harmonic excitation. From the experimental result, geometrical terms of non-linearity display light spring effect and these terms play an important role in the response characteristics of low frequency modes. Nonlinear nitration in the out of plane are also studied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2330-2334
• /
• 2014

In this study, we confirmed the frequency characteristics of planar spiral inductor based on non-contact method AC coupling for wireless signal transmission. The dielectric constant variation of the substrate does not directly effect the inductance of device but effect the electrostatic capacity of device. Therefore, its change self-resonance frequency. The thickness increment of the substrate increase inductance but decrease self-resonance frequency. Because, the thickness decrement of the substrate make the inside electrostatic capacity increment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1094-1102
• /
• 2010

In this paper, the problem of electromagnetic transmission via slits in a cavity inside conducting screen of finite thickness is considered for the case that the TE(to the slit axis) polarized plane wave is incident on the slit in conducting screen. Using the method of moments the variations of the transmitted power through the slits are obtained and compared with those computed from an equivalent circuit constructed using an equivalent slit admittance. It is found that the effective slit width of a narrow slit, at resonance, becomes $1/{\pi}$ wavelengths independently of the actual slit width. The transmission resonance phenomena in the proposed geometry are explained in connection with the variations of an equivalent admittance of the slit in the cavity.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1094-1103
• /
• 2008

A fuel specific detonation wave in a pipe propagates with a predictable wave velocity. This internal detonation wave speed determines the level of flexural wave excitation of pipes and the possibility of resonant response leading to a large displacement. In this paper, we present particular solutions of displacements and the resonance conditions for internally loaded pipe structures. These analytical results are compared to numerical simulations obtained using a hydrocode(multi-material blast wave analysis tool). We expect to identify potential explosion hazards in the general power industries.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.41-49
• /
• 2013

This paper suggests the dielectric resonator antenna using LTCC process for mm-wave car radar system. In this paper, dielectric resonator antennas (DRA) operated in 76-77 GHz frequency band are designed. And, using the LTCC process, the structures of dielectric resonator with SRR (split ring resonator) inside and those of dielectric resonator with probe inside are suggested. Linear polarization antennas and circular polarization antenna are designed for the DRA with probe inside. Three kinds of the DRA antennas are designed and their characteristics are calculated using CST RF simulation tool. The designed antennas are fabricated and measured and the measured results are compared with calculated results. The measured operating frequencies of DRAs are within 76 GHz to 77 GHz, which are close to the calculated results, and the measured gains are about 8.15 dBi to 10.82 dBi.

• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.303-307
• /
• 1997

The energy transfer of a laser-diode-pumped Nd : S-VAP laser was detected by the photoacoustic technique using a PZT detector. The photoacoustic method suggests an effectvie approach to understand the energy transfer mechanism of the laser cavity, and to find out the optimum output coupler of the oscillator with comparative ease.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.226-227
• /
• 2000

Laser Doppler velocimeters: (LDV)$^{1)}$ 의 대부분의 기본원리는 호모다인(honodyne)방법을 사용한다. 호모다인 방법 중에서 많이 사용되는 방법으로는 마이켈슨 간섭계식과 되먹임식(self-mixing type)$^{2)}$ 이 있다. 마이켈슨 간섭계식은 구성하는데는 많은 광학부품과 정밀한 정렬 장치들을 필요로 한다. 반면에 되먹임식은 레이저 공진기의 고유 주파수와 도플러 이동된 산란광을 공진기 속에서 자체 혼합하여 발생한 차주파수를 레이저 공진기 내부에 있는 pin-photodiode로 측정하므로 마이켈슨 간섭계에 비하여 간단한 장치로 속도계를 구성할 수 있다. (중략)

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.101-107
• /
• 2002

High performance packages must protect circuits from the internal leakaged-electromagnetic fields as well as the surrounding. In this paper, we characterized an electromagnetically-shielded millimeter-wave ceramic package from 20 to 40 ㎓ using FEM(Finite Element Method). From these calculation results, the parasitic resonance is observed at 33.4 ㎓. We use metal-filled via-holes at the ceramic package walls and resonance has been suppressed in a frequency range from 20 to 40 ㎓. These calculation results will be helpful for MMIC packaging using electromagnetically-shielded millimeter-wave ceramic packages.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.4
• /
• pp.507-514
• /
• 2012

This paper proposed the analysis method of the cavity resonance characteristics for a metallic enclosure with a PCB trace source. In order to calculation the electromagnetic fields inside the cavity, coupled integral equations for a current distribution on the PCB trace and an aperture electric field distribution on the boundary of the PCB dielectric are derived and solved by applying Galerkin's method of moments. The result show that the resonant characteristics of the metallic enclosure are fairly good agreement with the simulation(HFSS) and the measured results. The resonant frequencies of the metallic enclosure with the PCB trace are changed by the PCB trace location inside of the cavity. In order to check the validity of the theoretical analysis, the calculated return losses are compared with the measured results.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.314-315
• /
• 2000

레이저 매질은 흡수된 여기 파워에 의해 매질 내부에서 열이 발생하고, 매질 표면을 따라 냉각이 진행되어 매질 내부에서는 불균일한 온도분포가 발생하게 된다.$^{[1,2]}$ 레이저 매질의 굴절율은 온도에 따라 변하기 때문에 열복굴절과 열렌즈 현상이 일어나 레이저 출력의 손실 및 빔질의 저하를 초래하게 된다.$^{[1,3]}$ 선형 편광 광선을 이용하는 고체 레이저는 레이저 매질을 브루스터각으로 가공하거나 공진기 내부쉐 브루스터판을 삽입한다. 따라서, 선형 편광 광선은 열복굴절에 의한 위상 지연으로 타원 편광이 되고, 타원 편광 광선의 s-성분은 브루스터판에서 반사를 일으키게 되어 레이저 출력의 손실을 일으키게 되므로 레이저 공진기를 구성하는데 있어서 정량적인 열영향의 해석이 필요하다$^{[1,2,5]}$ 열영향에 의한 위상 지연은 방위각 방향과 반지름 방향으로 각각 $\Delta$ $n_{\Phi}$, $\Delta$ $n_{r}$ 만큼 생긴 굴절율의 차이로 발생하고 다음과 같이 표현할 수 있다.$^{[1]}$ (중략)이 표현할 수 있다.$^{[1]}$ (중략)