• The Journal of the Korea Contents Association
• /
• v.7 no.7
• /
• pp.24-30
• /
• 2007

This paper observed characteristics of a triangular microstrip patch antenna with T-slot. When a narrow horizontal slot or vertical slot is embedded in a triangular microstrip antenna, we investigated variations of dual resonant frequency according to slot lengths and then we could make a triangular microstrip antenna with T-type slot suitable to a very low dielectric substrate. The proposed antennas used a dielectric substrate which has relative dielectric constant ${\epsilon}_r=3.38$ and a height of 8 [mils] (=0.2032mm) and antenna characteristics of horizontal or vertical slot antennas are compared by a ensemble 8.0 simulator. Theoretical and experimental results of manufactured antennas are compared.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.250-254
• /
• 2000

We have constructed laser Doppler velocimetry system using self-mixing effect with a semiconductor laser. This technology is based on the frequency mixing phenomena which occurs when light scattered back from the moving object into the laser cavity interferes with light inside the laser. We have compared the value of Doppler shifted frequency with the velocity variation of the wheel. Frequency dependence on the angle between the moving direction of rotating aluminum wheel and the incident beam also have been proved. As an illustration of the performance of the velocimeter, velocity measurements of a rotating disk are described. Doppler signal shows a good linear relationship with velocity of rotating disk.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.12
• /
• pp.967-975
• /
• 2013

In the design of underwater electro acoustic transducer, power factor improvement circuit is more required rather than impedance matching if the driving power amplifier has little inner resistance. Many research results have been focused on the power matching circuit designing for transferring maximum power in the wideband. There are few results in the designing study on the power factor improvement for the wide band underwater electro acoustic transducer. In this paper, we set up a new design method on the power factor improvement for the wide band electro acoustic transducer, and confirm its feasibility by the experiments.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.10
• /
• pp.1103-1108
• /
• 2010

This paper proposes a new type of PIFA with a capacitor structure inserted into the feeding loop. It operates in GSM900, DCS, PCS, and W-CDMA frequency bands. By inserting the capacitor, it shows the effect of lowering the return loss from -2.73 dB to -6.26 dB at the parallel frequency, 2.01 GHz. The improvement of the poor radiation property near the parallel resonance frequency leads to a broadband operation in the upper band, DCS, PCS, and W-CDMA.

• Proceedings of the KSME Conference
• /
• 2001.11a
• /
• pp.603-608
• /
• 2001

A certain amount of MBS rubber was added to improve toughness of PVC which has a strong tendency of being brittle, producing a mixture, PVC/MBS, from which test specimens were prepared. PVC has strong chemical resistance, oil resistance, frame retardancy and high mechanical strength. Also, it is relatively inexpensive to produce, but shows weakness to impact and difficult for processing. MBS, a typical toughening agent for PVC is generally known, when added in a small amount, to improve impact resistance and to minimize difficulties during the processing of the PVC without adversely affecting the positive aspects of the PVC. In this investigation, attempts were made to observe and determine the variations in elastic and damping constants of the PVC depending on the amounts of MBS added to the mixture, PVC/MBS, and also on the thicknesses of the specimens. An acoustic resonance technique was used for the tests in this investigation. It serves as a method to characterize properties of materials set in vibrational motions, which is initiated by low level stresses generated by externally supplied acoustic energy. Substantial variations were observed in the test results with the addition of the MBS to the PVC. Generally, the magnitudes of elastic constants decrease while the damping capacity improves when MBS rubber was added.

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.476-480
• /
• 2010

In the corrugated steel panels used for railway vehicles, sound insulation performance is significantly deteriorated by local resonance effect. In this study, as a countermeasure, polyurethane foam is filled in the corrugated steel panel and glass wool layer is inserted in the layered floor panel, and then improvement effect of the sound insulation performance is experimentally estimated. Based on ASTM E2249-02, intensity transmission loss is measured and estimated on the corrugated panel and floor structure. The aim of the study is to identify how the foam filling and inserting glass wool layer improve the sound insulation performance of the train body structure in aspect of the weight increment.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1197-1199
• /
• 2015

PLS-II 키커 모듈레이터는 마그넷 코일 4개에 펄스전원을 공급하고 있다. 에너지 저장용 커패시턴스 합성 값은 $3.2{\mu}F$이고, 두 개의 회로로 커패시턴스 $1.6{\mu}F$로 나뉘어져 있다. 키커 마그넷 코일 두 개를 직렬연결하고 두 개 회로를 병렬구조로 하여 펄스 폭 $6.8{\mu}s$, 전류 20 kA, 운전주파수 10 Hz로 운전되고 있다. 커패시터와 코일의 직렬공진에 의해 에너지를 전달하는 직렬공진회로이다. 인덕턴스를 줄일 목적으로 전원장치는 키커 마그넷 가까이에 설치되어있다. 이것은 펄스폭에 영향을 미치게 되며 운전전류에 민감해서 그 값이 커지게 되면 입력공급 전압이 높아지게 된다. 장치의 운영적인 측면에서 고장이나 키커 모듈레이터 내부에 문제가 발생 하였을 경우 저장링 터널에 설치되어있는 전원을 점검하기 위해서는 빔 운전을 중단하고 접근을 해야 하는 불편함이 있다. 키커 모듈레이터 전원을 단일전원을 하고자 하는 궁극적인 목적은 입사효율을 높이기 위함이며, 입사되는 키커의 변수를 조정하고자 한다. 또한, 정비의 용이성과 입사 시 키커의 전압, 전류를 개별적으로 조정이 가능하게 단일전원으로 장치를 제작하고자 한다. 본 논문에서는 단일전원의 설계와 실험내용을 소개하고자 한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.2
• /
• pp.191-196
• /
• 2016

Applying diffraction of waves and muffler principle, the theory of macroscopic air ventilation with soundproofing was explained. Soundproofing frequency range can be selected by this method. The sound wave was attenuated at the resonator located between double-layered walls. A soundproof plate was designed and the experiment was processed. There are two air holes of diameter of 5cm and thickness of 8cm on the surfaces per each soundproofing cell. There was a transmission loss of about 25dB and it is more than at least 10dB compared with that of the Comnex technology of wave cancellation by air holes in Japan. Furthermore, there was no soundproof frequency selection in the Comnex technology.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.68-77
• /
• 2017

High-frequency combustion instability results from a feedback coupling between the unsteady heat release rate and the acoustic waves formed resonantly in the combustion chamber. It can be modeled as thermoacoustic problems with various degrees of the assumptions and simplifications. This paper presents numerical analysis of self-excited combustion instabilities in a variable-length lean-premixed combustor and designs of passive control devices such as baffle and acoustic resonators in a framework of 3-D FEM Helmholtz solver. Nonlinear behaviors such as steep-fronted shock waves and a finite amplitude limit cycle are also investigated with a compressible flow simulation technique.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1903-1905
• /
• 2003

전자기력을 이용하여 탐침형 정보저장장치의 미디어를 제어할 수 있는 초정밀 구동기를 제작하였다. 탐침형 정보저장장치는 데이터 비트의 크기가 10nm 수준이고, 단일 캔틸레버가 점유하는 영역의 크기가 수십 ${\mu}m$${\times}$수십${\mu}m$ 수준이므로, 미디인 구동기는 수 nm의 위치 정확도 및 수십 ${\mu}m$ 수준의 변위 그리고 100Hz이상의 공진 주파수를 확보하여야한다. 본 연구에서 제작한 탐침형 정보저장장치의 미디어 구동기는 고저항 Si wafer 표면을 Deep RIE로 patterning한 후 그 내부를 도금으로 채워 구리 코일을 형성하고 이를 영구자석과 결합시킨 후, 구리 코일에 전류를 흘려 미디어를 구동하는 방식이다. 사용된 영구자석은 SmCo 자석이며 코일의 폭은 $100{\mu}m$이고 간격은 $20{\mu}m$, 높이는 $70{\mu}m$로 결정하였으며, 100Hz 이상의 공진 주파수를 확보하기 위하여 스프링 재질은 구리보다 상대적으로 stiff한 Si을 사용하였다. 미디어의 크기는 $20{\times}20mm^2$, 전체 구동기의 크기는 $30{\times}30mm^2$이며 측정결과 최대변위는 140mA 인가 시 약 ${\pm}127{\mu}m$이다.