• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.281-281
• /
• 2013

본 연구에서는 고출력 금속 인쇄회로기판(Metal PCB) 개발을 위해 절연층으로 양극산화막을 형성하고 이 절연층 위에 Screen Printing 법을 이용하여 Ag paste를 패턴 인쇄한 알루미늄 기판을 사용하였다. 이 기판 위에 무전해 방식으로 구리 박막을 성장시켜, 무전해 도금 조건이 구리 박막 성장에 미치는 영향에 대해 연구하였다. 무전해 도금 시, pH 농도와 plating 온도를 변화시켜 이 변화에 따른 무전해 구리도금 박막의 물리적/전기적 특성을 비교 분석하여 무전해 도금에 의해 형성된 구리 박막과 기판과의 상관 관계도 비교 검토하였다. XRD (X-ray Diffraction), 광학현미경, FE-SEM (Field Emission Scanning Electron Microscope)등을 이용하여 성장된 구리 박막 및 기판의 결정성, 표면 및 단면 형상 등을 측정하였고, XPS (X-ray Photoelectron Spectroscopy)를 이용하여 무전해 도금에 의한 Cu의 화학구조 및 불순물 상태를 조사하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.1
• /
• pp.12-18
• /
• 2009

In this paper, for reducing the assembly torque of subminiature plastic barrel and base which are the essential parts of mobile phone camera module, the high-precision system for inspecting the screw shape of core, electrode and injection molding products was developed. For realization of inspection process, the inspection parameters for evaluating the manufacturing quality were selected and the measurement methods of selected parameters were developed. Finally, the inspection system which is possible to be applied to the field were fabricated.

• Journal of the Korean Vacuum Society
• /
• v.15 no.5
• /
• pp.475-484
• /
• 2006

The deformation, the stress distribution, and the contact pressure of gaskets used in sealing flanges of CF (Con-Flat) or IPD (Improved) type were calculated to investigate the possibility of analyzing and estimatimg the sealing performance under a given tightening condition for a specific flange system.

• 기계와재료
• /
• v.25 no.3
• /
• pp.6-15
• /
• 2013

유압프레스의 단점을 극복하기 위해서 서보모트를 장착하여 성형속도를 높인 서보 유압프레스를 개발하게 되었으며, 특히나 서보모터를 국내산으로 적용하여 듀얼형으로 유압시스템의 효율성을 높여 최종적으로 개발함으로써 서보 유압프레스를 완전 국산화하였다. 또한 하사점 위치 제어의 용이성을 확보하기 위해 프레스 램용 메인 실린더에 톱니나사부를 만들어 임의의 위치에 정지할 수 있는 정지정도 및 하사점 위치 제어정밀도를 향상시켰으며, 유량의 미세 제어를 통해 프레스 램의 동작성을 개선코자 하였다. 다이쿠션은 메인 실린더와의 연계 제어를 통해 제품의 손상 방지 및 제품 추출의 용이성을 확보하였으며, 소재의 종류나 제품의 형상 특성에 따라 프리모션 제어가 가능한 지식기반형 자율제어 시스템을 적용하였다. 듀얼 서보시스템과 유압펌프가 연계구동함에 따라 기존 유압프레스 보다 약 40%이상의 에너지절감을 달성할 수 있을 것으로 예측되며, 현재 에코머신 인증제도에 대한 논의가 활발한 시점에서 매우 적합하고 필요한 하이브리드형 서보 유압프레스의 국산화 개발 사례라고 하겠다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.11
• /
• pp.1099-1104
• /
• 2012

The study investigates the mechanical deformation of a newly developed screwless omega-wire dynamic system for stabilization of the spine. The omega-wire spring stabilization system was tested under tension, compression, and dynamic compressive fatigue loads. In addition, its bending deformation was compared to that of a spiral-wire spring system using FEA. A model whose hanger inter-center distance is 60 mm showed an ultimate tensile stress of 3981.7 N at a displacement of 3.61 mm and an ultimate compressive load of 535.6 N at a displacement of 2.16 mm. Under fatigue loading of 5 Hz with 10 N/1 N, it did not show any failure over 5 million cycles, and the displacement was restricted to 8-9 mm. In the FEA, the omega-wire spring system showed more flexible bending features than did the spiral-wire spring system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.5
• /
• pp.31-39
• /
• 2016

This paper is studied on the effect of the bolt joint stiffness on the Thrust Measurement Stand(TMS). TMS is a test stand for thrust performance of the propulsion system, which depends on two factors: The $1^{st}$ is the parallel degree between directions of the thrust vector and action lines of the corresponding measuring load cells for the vector, and the $2^{nd}$ is the orthogonality between action lines of the measuring load cells. Therefore, it is essential to maintain the original shape of the TMS under operating conditions. In this paper, it is examined how the geometric tolerance of the bolt joints and threads of the load cell trains affect the performance of the TMS. Also, some techniques to overcome related problems are proposed.

• Journal of Biomedical Engineering Research
• /
• v.23 no.5
• /
• pp.385-390
• /
• 2002

Nowadays, there are many attempts to develop domestic medical-equipments. In this study, it is performed to developed a new vertebral fusion device. The basic models are a rectangular-frame type and a screw type which are generally used for the patients. The main purpose of the development of a new device is to reduce the amount of bone taken out for the insertion of a device to vertebral disc and this paper is focused on th concept of a new device shape. In the results, two types are devised. One is a folding type and the other is a separate-push-in type device both are in primitive stage. However, in a folding type there are mechanical pins and the analysis of pins and the lock system is still in study and needs some time. Therefore a separate-push-in type is introduced in this study mainly and a prototype and 3-D finite element model are made and experimented and stress analyzed. From the results it is considered that it is stable for the basic loading condition of vertebra, however, it is required to develop a supporting operational equipment for the convenience of the operation in practice.

• The korean journal of orthodontics
• /
• v.39 no.4
• /
• pp.203-212
• /
• 2009

Objective: The aim of this study was to evaluate the strain induced in the cortical bone surrounding an orthodontic microimplant during insertion in a self-drilling manner. Methods: A 3D finite element method was used to simulate the insertion of a microimplant (AbsoAnchor SH1312-7, Dentos Co., Daegu, Korea) into 1 mm thick cortical bone. The shape and dimension of thread groove in the center of the cortical bone produced by the cutting flute at the apical of the microimplant was obtained from animal test using rabbit tibias. A total of 3,600 analysis steps was used to calculate the 10 turns and 5 mm advancement of the microimplant. A series of remesh in the cortical bone was allowed to accommodate the change in the geometry accompanied by the implant insertion. Results: Bone strains of well higher than 4,000 microstrain, the reported upper limit for normal bone remodeling, were observed in the peri-implant bone along the whole length of the microimplant. Level of strains in the vicinity of either the screw tip or the valley part were similar. Conclusions: Bone strains from a microimplant insertion in a self-drilling manner might have a negative impact on the physiological remodeling of cortical bone.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.89-97
• /
• 2007

Objective: The purpose of this study was to measure the insertion torque of orthodontic miniscrews regarding changes in their shape, diameter, and length. Methods: Torque values were measured during continuous insertion of the miniscrews into solid rigid polyurethane foam, using a torque tester of driving motor type with a regular speed of 3 rpm. Orthodontic miniscrews (Biomaterials Korea, Seoul, Korea) of cylindrical type and taper type were used. Results: Increasing the length and diameter of the miniscrews increased the maximum insertion torque value in both cylindrical and taper type screws. Insertion torque was increased at the incomplete head of the cylindrical type screw, and at the tapered part of the taper type screw. The insertion torque value of miniscrews was influenced most by diameter, then shape and length. As a result, it was shown that the diameter of the screw had the most influence on insertion torque, and the taper type screw had a higher torque value than the cylindrical type screw. Conclusion: Therefore, a large diameter or taper type screw are adequate for areas of thin cortical bone with a large interdental space, and a small diameter or cylindrical type screw are adequate in the mandibular molar area or the midpalatal area having thick cortical bone.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.917-923
• /
• 2014

Subminiature joining bolts are required for the electronic parts of gadgets such as mobile phones and watch phones. During the miniaturization of bolt heads, it is difficult to obtain sufficient joining force owing to the risk of shear fracture of the bolt head or severe plastic deformation on the bit region. In this study, the maximum joining torque for the bit depth was predicted using finite element analysis. A shear fracture test was conducted on a wire used in bolt forming. The results of this test were subjected to finite element analysis and a fracture criterion was obtained by comparing the experimental and analysis results. The shear fracture of the bolt head during joining was predicted based on the obtained criterion. Furthermore, the maximum joining torque was predicted for various bit depths. Fracture on the boundary between the bolt head and thread was found to occur in lower joining torque as bit depth increases.