1 |
W.R. Wheeler and M. Carlson, Ultra-high vacuum flanges, Natl. Sym. Vacuum Technol. Trans. 1961, 1309(1962)
|
2 |
K.M. Welch et al., Metal and elastomer seal tests for accelerator applications, Vacuum 41, 1924(1990)
DOI
ScienceOn
|
3 |
A. Roth, The influence of the surface roughness on the specific leak rate of the gasket seals, Vacuum 20, 431(1970)
DOI
ScienceOn
|
4 |
T. Wikberg and E. Dodelin, FEM calculation of UHV all-metal demountable joints for LEP, CERN-LEP-VA/89-49, 1989
|
5 |
R.B. Fleming, R.W. Brocker and D.H. Mullaney, Development of bakeable seals for large noncircular ports on the TFTR, J. Vac. Sci. Technol. 17, 337(1980)
DOI
|
6 |
I. Sasaki, H. Ishimaru, G. Horikoshi, Sealing concept of elastic metal gasket Helicoflex, Vacuum 32, 33(1982)
DOI
ScienceOn
|
7 |
K. Obara et al., A study for the improvement on knife-edge metal-seal flange, Jap. J. Vac. Soc. 32, 2(1989)
DOI
|
8 |
S. Kurokouchi, et al., Reconsideration on ConFlat seal mechanism by gasket deformation measurements (in Japanese), J. Vac. Soc. Jpn. 42, 910(1999)
DOI
|
9 |
A. Roth, Vacuum Sealing Techniques, Pergamon Press, 1966
|
10 |
S. Kurokouchi, S. Morita and S. Morita, Characteristics of a taper-seal type gasket for the Conflat sealing system, J. Vac. Sci. Technol. A19, 2963(2001)
|