• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.536-542
• /
• 2018

Tin dioxide, $SnO_2$, is a well-known n-type semiconductor that shows change in resistance in the presence of gas molecules, such as $H_2$, CO, and $CO_2$. Considerable research has been done on $SnO_2$ semiconductors for gas sensor applications due to their noble property. The nanomaterials exhibit a high surface to volume ratio, which means it has an advantage in the sensing of gas molecules. In this study, SnO nanoplatelets were grown densely on Si substrates using a thermal CVD process. The SnO nanostructures grown by the vapor transport method were post annealed to a $SnO_2$ phase by thermal CVD in an oxygen atmosphere at $830^{\circ}C$ and $1030^{\circ}C$. The pressure of the furnace chamber was maintained at 4.2 Torr. The crystallographic properties of the post-annealed SnO nanostructures were investigated by Raman spectroscopy and XRD. The change in morphology was confirmed by scanning electron microscopy. As a result, the SnO nanostructures were transformed to a $SnO_2$ phase by a post-annealing process.

• Journal of the Microelectronics and Packaging Society
• /
• v.20 no.3
• /
• pp.23-29
• /
• 2013

Development of flexible electronic devices has primarily focused on printing technology using organic materials. However, organic-based flexible electronics have several disadvantages, including low electrical performance and long-term reliability. Therefore, we fabricated nano- and micro-thick silicon film attached to the polymer substrate using transfer printing technology to investigate the feasibility of silicon-based flexible electronic devices with high performance and high flexibility. Flexibility of the fabricated samples was investigated using bending and stretching tests. The failure bending radius of the 200 nm-thick silicon film attached on a PI substrate was 4.5 mm, and the failure stretching strain was 1.8%. The failure bending radius of the micro-thick silicon film attached on a FPCB was 2 mm, and the failure strain was 3.5%, which showed superior flexibility compared with conventional silicon material. Improved flexibility was attributed to a buffering effect of the adhesive between the silicon film and the substrate. The superior flexibility of the thin silicon film demonstrates the possibility for flexible electronic devices with high performance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.1
• /
• pp.37-44
• /
• 2015

In this paper, we have investigated a selective assembly method of single-walled carbon nanotubes (SWCNTs) on a silicon substrate using only photolithographic process and then proposed a fabrication method of field effect transistors (FETs) using SWCNT-based patterns. The aminopropylethoxysilane (APTES) patterns, which are formed for positively charged surface molecular patterns, are utilized to assemble and align millions of SWCNTs and we can more effectively assemble on a silicon (Si) surface using this method than assembly processes using only the 1-octadecyltrichlorosilane (OTS). We investigated a selective assembly method of SWCNTs on a Si surface using surface-programmed APTES and OTS patterns and then a fabrication method of FETs. photoresist(PR) patterns were made using photolithographic process on the silicon dioxide (SiO2) grown Si substrate and the substrate was placed in the OTS solution (1:500 v/v in anhydrous hexane) to cover the bare SiO2 regions. After removing the PR, the substrate was placed in APTES solution to backfill the remaining SiO2 area. This surface-programmed substrate was placed into a SWCNT solution dispersed in dichlorobenzene. SWCNTs were attracted toward the positively charged molecular regions, and aligned along the APTES patterns. On the contrary, SWCNT were not assembled on the OTS patterns. In this process, positively charged surface molecular patterns are utilized to direct the assembly of negatively charged SWCNT on SiO2. As a result, the selectively assembled SWCNT channels can be obtained between two electrodes(source and drain electrodes). Finally, we can successfully fabricate SWCNT-based multi-channel FETs by using our self-assembled monolayer method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.1838-1843
• /
• 2014

Nanoimprint lithography (NIL) fabrication process is regarded as the main alternative to existing expensive photo-lithography in areas such as micro- and nano-electronics including optical components and sensors, as well as the solar cell and display device industries. Functional patterns, including anti-reflective moth-eye pattern, photonic crystal pattern, fabricated by NIL can improve the overall efficiency of such devices. To successfully imprint a nano-sized pattern, the process conditions such as temperature, pressure, and time should be appropriately selected. In this paper, a cavity-filling process of the moth-eye pattern during the thermal-NIL within the temperature range, where the polymer resist shows the viscoelastic behaviors with consideration of stress relaxation effect of the polymer, were investigated with three-dimensional finite element analysis. The effects of initial thickness of polymer resist and imprinting pressure on cavity-filling process has been discussed. From the analysis results it was found that the cavity filling can be completed within 100 s, under the pressure of more than 4 MPa.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.159-168
• /
• 2012

In this paper, we designed the antipodal vivaldi antenna for IR-UWB systems application and evaluated IR-UWB antenna performance for the ultra wideband impulse signal transmission in the time- and frequency-domain. The designed antipodal vivaldi antenna was fabricated using FR-4 substrate which thickness 1.6 mm, dielectric constant ${\epsilon}_r=4.7$ and $tan{\delta}=0.002$. We measured the return loss, far filed radiation pattern at the anechoic chamber in the frequency-domain. We also performed the pulse fidelity analysis in the time-domain using nano-second impulse signal transmission and demonstrated the feasibility of ultra wideband signal stable transmission in the UWB band. The designed and fabricated antipodal vivaldi antenna could be emitting and receiving the IR-UWB signal while preserving low pulse distortion and good radiation pattern in time- and frequency-domain.

• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.766-770
• /
• 2004

High-transmittance film was coated by using spherical silica nano colloids. Silica colloid sol was preservred between two inclined slide glasses by capillary force, and particles were stacked to form a film onto the substrate as the upper glass was sliding. As the sliding speed increased, the thickness of the film decreased and light transmittance varied. The microstructure observed by SEM showed that silica particles were nearly close packed, which enabled the calculation of the effective refractive index of the film. The film thickness calculated from the wavelength of maximum transmittance and the effective refractive index was well coincided with the thickness observed by SEM and measured by profiler. The maximum transmittance of $94.7\%$ was obtained. This means that $97.4\%$ of transmittance or $1.3\%$ of reflectance can be achieved by simple process if both sides of the substrate are coated.

• Journal of the Korean Vacuum Society
• /
• v.20 no.5
• /
• pp.374-380
• /
• 2011

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases and $SF_6$ as an additive gas under thermal chemical vapor deposition system. The characteristics (formation density and morphology) of as-grown carbon coils according to the injection stage of $SF_6$ gas incorporation were investigated. A continuous injecting of $SF_6$ gas flow could give rise to many types of carbon coils-related geometries, namely linear tub, micro-sized coil, nano-sized coil, and wave-like nano-sized coil. However, the limitation of the geometry as the nano-sized geometries of carbon coils could be achieved by the incorporation of $SF_6$ in a short time (1 min) during the initial deposition stage. A delayed injection of a short time $SF_6$ gas flow can deteriorate the limitation of the geometries. It confirms that the injection time and its starting point of $SF_6$ gas flow would be very important to determine the geometries of carbon coils.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.2
• /
• pp.119-124
• /
• 2013

In this study, the two-dimensional transient temperature of printed Ag nanoparticle ink during continuous wave laser sintering was calculated. Ag nanoparticle ink was printed on a glass substrate by inkjet printing. Then, a 532-nm continuous wave laser with different laser intensities was irradiated on the printed Ag nanoparticle ink for 60 s. During laser irradiation, the in-situ specific resistance of the sintered ink was measured. To obtain the transient temperature of the sintered ink during the laser sintering process, a two-dimensional transient heat conduction equation was derived by applying the Wiedemann-Franz law. It was found that the specific resistance of the sintered ink decreased with an increase in the sintering temperature of the printed ink.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.323-323
• /
• 2014

기존의 태양전지 기술은 기술 장벽이 매우 낮고 대량 생산을 통한 단가 절감하는 구조를 가지고 있어 대규모 자본을 가진 후발 기업에게 잠식되기 쉽다. 그러나, III-V족 화합물 반도체를 이용한 집광형 고효율 태양전지는 기술 장벽이 매우 높은 기술 집약 산업이므로 독자적인 기술을 확보하게 되면 독점적인 시장을 확보 할 수 있어 미래 고부가 가치 산업으로 적합하다. 특히 III-V족 화합물 반도체 태양전지는 III족 원소(In, Ga, Al)와 V족 원소(As, P)의 조합으로 0.3 eV~2.5 eV까지 밴드갭을 가지는 다양한 박막 제조가 가능하여 다양한 흡수 대역을 가지는 태양전지 제조가 가능하기 때문에 다중 접합 태양전지 제작이 가능하다. 또한 III-V 화합물 반도체는 고온 특성이 우수하여 온도 안정성 및 신뢰성이 우수하고, 또한 집광 시 효율이 상승하는 특성이 있어 고배율 집광형 태양광 발전 시스템에 가장 적합하다. Si 태양전지의 경우 100배 이하의 집광에서 사용하나, III-V 화합물 반도체 태양전지의 경우 500~1000배 정도의 고집광이 가능하다. 이러한 특성으로 III-V 화합물 반도체 태양전지 모듈 가격을 낮출 수 있고, 따라서 Si 태양전지 시스템과 비교하여 발전 단가 면에서 경쟁력을 확보할 수 있다. III-V 화합물 반도체는 다양한 밴드갭 에너지를 가지는 박막 제조가 용이하고, 직접천이(direct bandgap) 구조를 가지고 있어 실리콘에 비해 광 흡수율이 높다. 또한 터널정션(tunnel junction)을 이용하면 광학적 손실과 전기적 소실을 최소화 하면서 다양한 밴드갭을 가지는 태양전지를 직렬 연결이 가능하여 한 번의 박막 증착 공정으로 넓은 흡수대역을 가지며 효율이 높은 다중접합 태양전지 제작이 가능하다. 이에 걸맞게 본연구에서는 화학기상증착장치(MOCVD)를 이용하여 InAsP 나노선을 코어 쉘 구조로 성장하여 태양전지를 제작하였다. P-type Dopant로는 Disilane (Si2H6)을 전구체로 사용하였다. 또한 Benzocyclobutene (BCB) 폴리머를 이용하여 Dielectric을 형성하였고 Sputtering 방법으로 증착한 ZnO을 투명 전극으로 사용하여 나노선 끝부분과 실리콘 기판에 메탈 전극을 형성하였다. 이를 통해 제작한 태양전지는 솔라시뮬레이터로 측정했을때 최고 7%에 달하는 변환효율을 나타내었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.193-193
• /
• 2010

서로 다른 유전 물질을 이용하여 다층구조의 터널장벽을 이용하여 비휘발성 메모리 소자의 동작 특성 및 전하보존 특성을 향상시킬 수 있음이 보고되었다.[1-3] 본 연구에서는 $SiO_2/Si_3N_4/SiO_2$구조의 다층 구조의 터널 장벽을 이용하여 $WSi_2$ 나노 입자 비휘발성 메모리 소자를 제작하였다. P-형 Si 기판에 100 nm 두께의 Poly-Si 박막을 증착시켜 소스, 드레인 및 게이트 영역을 포토 리소그래피를 이용하여 형성하였다. $SiO_2/Si_3N_4/SiO_2$(ONO) 터널장벽은 CVD (chemical vapor deposition) 장치로 각각 2 nm, 2 nm 와 3 nm 두께로 형성하였으며, 그 위에 $WSi_2$ 박막을 3~4 nm 마그내트론 스퍼터링 방법으로 증착하였다. ONO 터널 장벽구조 위에 $WSi_2$나노입자를 형성시키기 위해, $N_2$분위기에서 급속열처리 방법을 이용하여 $900^{\circ}C$에서 1분간 열처리를 하였다. 마지막으로 20 nm 두께의 컨트롤 절연막을 초고진공 스퍼터를 이용하여 증착하고, Al 박막을 200 nm 두께로 증착하였다. 여기서. 제작된 메모리 소자의 게이트 길이와 선폭은 모두 $10\;{\mu}m$ 이다. 비휘발성 메모리 소자의 전기적 특성은 HP 4156A 반도체 파라미터 장비, Agilent 81104 A 80MHz 펄스/패턴 발생기를 이용하였다. 또한 전하 저장 터널링 메커니즘과, 전하누설의 원인을 분석하고 소자의 열적 안정성을 확인하기 위하여 $25^{\circ}C$ 에서 $125^{\circ}C$ 로 온도를 변화시켜 외부로 방출되는 전하의 활성화 에너지를 확인하여 누설근원을 확인하였다.