• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.371-376
• /
• 1997

A 100*100.mu.m$^{2}$ aluminum micro mirror is designed and fabricated using a thick photoresist as a sacrificial layer andas a mold for nickel electroplating. The micro mirror is composed of aluminum mirror plate, two nickel support posts, two aluminum hinges, two address eletrodes, and two landing electrodes. The aluminum mirror plate,which is supported by two nickel support posts, is overhung about 10.mu.m from the silicon substrate. THe aluminum mirror plate is actuated like a seesaw by electrostatic force generated by electic potential difference applied between the mirror plate and the address electrode. This paper presents some methods to measure the optical and the dynamic characteristics of the fabricated micro mirror.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.1
• /
• pp.63-67
• /
• 2016

We present a method of fabricating poly (lactic-co-glycolic acid) (PLGA) porous microfibers using a pore template. PLGA microfibers were synthesized using a glass capillary tube in a poly-(dimethylsiloxane) (PDMS) microfluidic chip. Gelatin solution was used as a porous template to prepare pores in microfibers. Two phases of PLGA solutions in different solvents-DMSO (dimethyl sulfoxide) and DCM (dichloromethane)-were used to control the porosity and strength of the porous microfibers. The porosity of the PLGA microfibers differed depending on the ratio of flow rates in the two phases. The porous structure was formed in a spiral shape on the microfiber. The porous structure of the microfiber is expected to improve transfer of oxygen and nutrients, which is important for cell viability in tissue engineering.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.2
• /
• pp.245-250
• /
• 2011

A high-resolution shadow mask, a nanostencil, is widely used for high resolution lithography. This high-resolution shadowmask is often fabricated by a combination of MEMS processes and focused ion beam (FIB) milling. In this study, FIB milling on 500-nm-thin SiN membrane was tested and characterized. 500 nm thick and $2{\times}2$ mm large membranes were made on a silicon wafer by micro-fabrication processes of LPCVD, photolithography, ICP etching and bulk silicon etching. A subsequent FIB milling enabled local membrane thinning and aperture making into the thinned silicon nitride membrane. Due to the high resolution of the FIB milling process, nanoscale apertures down to 60 nm could be made into the membrane. The nanostencil could be used for nanoscale patterning by local deposition through the apertures.

• Korean Journal of Poultry Science
• /
• v.22 no.2
• /
• pp.105-115
• /
• 1995

The balance of microbial populations in the gastrointestinal (GI) tract of all warm-blooded animals is critical to the maintenance of health and resistance to disease. The composition of the populations can be altered by diet and environment, making the host animal susceptible to disease, and reducing growth rate and feed efficiency. Some feed additives including antimicrobial agents, prohiotics or yucca extract have been used to promote growth and feed utilization. There is evidence that part of growth-promoting effect of those feed additives results from the suppression of microbial urease activity or ammonia production in the GI contents of animals. Over 200 microbial species have been known to produce urease and the product of urea hydrolysis, ammonia, is toxic to animals. Carefully tested probiotics or other urease-suppressing agents can be a possible alternative to antimicrobial agents including antibiotics as growth promotants used for animals feeds.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.2
• /
• pp.236-240
• /
• 2013

In this presentation, we propose a fabrication method of PDMS stencil to apply into a localized culture of NIH/3T3 cells. PDMS stencil was fabricated by nitrogen gas blowing and soft lithography from preparing SU-8 master mold by photolithography. PDMS stencil pattern was production of the circle size 20 to $500{\mu}m$. In the culture test of PDMS stencil, a stencil was placed on a glass disk. The NIH/3T3 cells were successfully cultured into micropatterns by using the PDMS stencil. The results showed that cells could be cultured into micropatterns with precisely controlled manner at any shapes and specific size for bioscience study and bioengineering applications.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.574-577
• /
• 2000

The purpose of robot manipulator control is to make for manipulator take a trace of pre-planned trajectory. In this study, the algorithm of MRAC(Model Reference Adaptive Control) on reference to adaptive control theory was studied. The experiments were performed on 6-DOF robot manipulator with respect to p-d(proportional-differential) controller and adaptive controller. The property of adaptive control was studied and its efficiency proved by being compared to p-d controller.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.461-464
• /
• 2006

The caisson of the inner wall type has a weak point that reflecting wave is big. Therefore it has been studied that the research of the decreasing reflecting wave using installation the perforated wall in front of caisson to decrease of that weak point. In this study, we analyzed the characteristic of reflection horizontal and diamond style vertical slit caisson using hydraulic model test. According to the results of experiments, we could confirm that diamond style vertical caisson has a reflection coefficient which has lower than horizontal caisson of the reflection coefficient of 5~10%.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.449-452
• /
• 2006

The main external force of the harbor in east coast is wave. So, wave is the important cause of wave induced current and sediment transport due to wave in planning harbor structures. Therefore, it must be considered not only to secure the harbor tranquility but also the sediment transport due to wave induced current in planning the harbor. In this study, we studied on the influences of construction procedure on harbor tranquility and siltation using annual coastal line data and bathymetry data near breakwater. And it suggests that the construction procedure for the harbor tranquility and the best way for the decrease of harbor siltation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.5
• /
• pp.496-501
• /
• 2009

In micro electrochemical machining(micro-ECM), it is important to measure and control the potential of a tool electrode and a workpiece electrode because electrochemical reaction rate depends on the potential of the electrodes. When the electrode potential was measured against a reference electrode, the error of measured electrode potential could be minimized by proper tool electrode design. In this paper, multi-function electrodes consisting of a tool electrode and a reference electrode was fabricated by micro fabrication techniques. The machining conditions in micro-ECM using multi-function electrodes, such as pulse voltage parameters and electrode potential, were investigated.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1807-1809
• /
• 2002

In this study, asolid-state laser system adopting a firing time control(FTC) method in which three flashlamps are turned on consecutively was designed and fabricated to examine the pulse width and the pulse shape of the laser beams depending upon the changes in the lamp turn-on time. That is, this study shows a technology that makes it possible to make various pulse shapes by turning on three flashlamps consecutively on a real-time basis with the aid of a PIC one-chip microprocessor With this technique, the lamp turn-on delay time can be varied more diversely from 0 to 10 ms and the real-time control is possible with an external keyboard enabling various pulse shapes. In addition longer pulses can be more widely used for industrial processing and lots of medical purposes.