• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.351-352
• /
• 2009

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.16-29
• /
• 2009

This paper investigates the kinematic and dynamic analysis of a spherical three degree of freedom parallel joint module, which is used in the exercise equipment for balance and leg-strength improvement of aged people. The joint module has three dyads which consist of two links and three revolute joints, and their all joints intersect at the global point located at the module's center. The paper shows the explicit mathematical procedure for deriving the closed form solutions in the inverse and forward position analysis of this parallel joint module. In velocity and acceleration analysis, we derived relations for joint velocities and accelerations of dyads and rotational velocity and acceleration of the top plate. For applying this module to rehabilitation exercise, we determined the dynamic model of the Korean males in their 50s and examined the model's results by dynamic model simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.289-292
• /
• 1994

In this paper, the equations of motion are constructed systematically for multibody systems containing closed kinematic loops. For the displacement analysis of the closed loops, we introduce a new mixed coordinates by adding to the reference coordinates, relative coordinates corresponding to the degrees of freedom of the system. The mixed coordinates makes easy derive the explicit closed form solution. The explicit functional relationship expressed in closed form is of great advantages in system dimension reduction and no need of an iterative scheme for the displacement analysis. This forms of equation are built up in the general purpose computer program for the kinematic and dynamic analysis of multiboty systems.

• ICROS
• /
• v.10 no.4
• /
• pp.29-34
• /
• 2004

로봇 공학의 최종 목표는 인간의 행동, 지능 그리고 상호작용을 모방할 수 있는 인간형 로봇을 만드는데 있다[1]. 그 중에서 지능을 모방하는 것이 미래 인간형 로봇의 핵심 기술이 되겠지만, 현재로서는 인간형 로봇을 개발하는데 있어 필요한 로봇의 동작이나 상호작용 기술을 개발하기 위한 로봇 플랫폼 기술 개발이 중요한 부분을 차지하고 있다. 로봇 플랫폼을 개발함에 있어서는 로봇 메커니즘 설계와 구동 제어기 설계가 중요한 기본 요소이다. 휴머노이드의 메커니즘을 설계함에 있어서는 인간의 표준 기구학 데이터를 이용하고, 구동 제어기를 설계함에 있어서는 인간의 동역학적 데이터를 사용하는 것이 좋은 방법이라 생각된다. (중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.5
• /
• pp.118-125
• /
• 2002

The previous kinematic analysis of wheeled mobile robots(WMRs) is performed in an ad-hoc manner, while those of the robot manipulators are done in a consistent way using the coordinate system assignment and the homogeneous transformation matrix. This paper shows why the method for the robot manipulators cannot be used directly to the WMRs and proposes the method for the WMRs, which contains modeling the wheel with the Sheth-Uicker notation and the homogeneous transformation. The proposed method enable us to model the velocity kinematics of the WMRs in a consistent way. As an implementation of the proposed method, the Jacobian matrices were obtained for conventional steered wheel and non-steered wheel respectively and the forward and inverse velocity kinematic solutions were calculated fur a tricycle typed WMR. We hope that our proposed method comes to hold an equivalent roles for WMRs, as that of the manipulators does for the robot manipulators.

• Journal of Institute of Control, Robotics and Systems
• /
• v.3 no.4
• /
• pp.422-434
• /
• 1997

In this paper, a two-stage kinematic optimal design for a 3 degree of-freedom (DOF) excavator subsystem, which consists of boom, arm and bucket, is performed. The objective of the first stage is to find the optimal parameters of the joint-actuating mechanisms which maximize the force-torque transmission ratio between the hydraulic actuator and the rotating joint. The objective of the second stage is to find the optimal link parameters which maximize the isotropic characteristic of the excavator subsystem throughout the workspace. It is illustrated that kinematic/dynamic performances of the kinematically optimized excavator subsystem have improved compared to those of original HE280 excavator, with respect to three performance indices such as maximum load handling capacity, maximum velocity capability, and acceleration capability.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.4
• /
• pp.103-111
• /
• 2003

The Denavit-Hartenberg symbolic notation provides the framework for the convenient and systematic method for the robot manipulator kinematics, but is limited its use to the lower pair mechanism or to the single loop mechanisms. The Sheth-Uicker notation is its revised and generalized version to be extended fur the entire domain of the link mechanism including the higher pairs. This paper proposes the method that uses the Sheth-Uicker notation fur the robot kinematics modeling. It uses the instantly coincident coordinate system and the closed loop chain fur the coordinate transformation. It enables us to model the velocity kinematics of the robot that has the complex structures such as the ternary links and the wheels in a systematic and rational way. As an implementation of the proposed method, the Jacobian matrices were obtained for not only the robot with two legs and a torso, but a manipulator on a mobile platform.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.1
• /
• pp.64-71
• /
• 2012

In this paper, a parallel manipulator is comprised of two sliders and four links. Sliders execute a linear reciprocating motion depending on parallel guides and make the connected links rotate. A couple of links connected by sliders do coupling motion. The end-effector called a link tip has orientation angle. Through the kinematics analysis of this manipulator, we found displacement, velocity and acceleration using direct and inverse kinematics. We used equations that derived from this analysis and determined five constraint conditions. These conditions had much to do with rotation states of links, the relative relation of link length and coupling motion state. To verify those, we suggest a new algorithm regarding constraint conditions of a manipulator. With the result which performed the algorithm, we found out that operation range of coupled links was limited by relative relation of link length and that manipulator was not able to carry out a series of link motion, in case of being the link vertical between two parallel guides.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.299-303
• /
• 2004

In our pervious paper, a new parallel-type spherical 3-degree-of-freedom mechanism consisting of a two-degree-of-freedom parallel module and a serial RRR subchain was proposed[1]. In this paper, its improved version is suggested and implemented. Differently from the previous 3-dof spherical mechanism, gear chains are incorporated into the current version of the mechanism to drive the distal revolute joint of the serial subchain from the base of the mechanism and in fact, the modification significantly improves kinematic characteristics of the mechanism within its workspace. Firstly, after a brief description on its structure, the closed-form solutions of both the forward and the reverse position analysis are derived. Secondly, the first-order kinematic model of the mechanism for the inputs which are assumed to be located at the base is derived. Thirdly, through the simulations of the kinematic analysis via. kinematic isotropic index, it is confirmed that the mechanism has much more improved isotropic properties throughout the workspace of the mechanism than the previous mechanism in [1]. Lastly, the proposed mechanism is implemented to verify the results from this analysis.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.2
• /
• pp.133-142
• /
• 2005

This paper proposes an object-oriented conceptual information model of mechanical assemblies, named open assembly model (OAM). The proposed assembly model primarily defines hierarchical relationships between parts and subassemblies. Together with the assembly hierarchy. the model also provides a way to represent tolerances, kinematic information, and parametric assembly constraints. Relational information such as mating conditions and degree of freedom between parts and subassemblies is captured via assembly features and relationships thereof. The information model is described using class diagrams of the Unified Modeling Language (UML), and instance diagrams are used to exemplify the proposed information model. The conceptual model presented in this paper is an integrated information model for assembly representation, which could supply necessary information for tolerance analysis and synthesis, kinematic simulation, and assembly simulation. Such a conceptual information model plays an important role for the exchange of information between modeling, analysis and planning systems. Hence, the proposed model could serve as a framework for developing data exchange standards of mechanical assemblies. The proposed model is demonstrated through a case study of a planetary gear assembly.