• The Journal of the Acoustical Society of Korea
• /
• v.12 no.3
• /
• pp.5-12
• /
• 1993

볼트와 너트에 대한 초음파비파괴검사는 종파와 사각 횡파 기술을 사용하고 있는데 작은 결함신호는 자사산의 신호와 크기가 비슷해 구분이 되지 않는다. 본 논문에서는 나사산의 다중반사신호로부터 결함신호를 구분할 수 있는 방법을 제시한다. 종파를 사용하였을 경우 균열의 선단신호와 코너에서 반사되는 신호는 진행시간이 거의 같아 중첩되어 나타나지만 균열로 인한 Rayleigh파는 균열의 선단신호와 코너에서 반사되는 신호다음에 결함길이에 따른 미세한 진행시간을 가지고 나타난다. 이와는 다르게 횡파를 사용하였을때의 균열의 선단신호는 코너에서 반사되는 신호보다 앞에 나타난다. 이러한 나사산에 존재하는 결함의 선단신호를 기준으로 순방향 또는 역방향으로 반사되는 신호로부터 작은 결함신호도 구분할 수 있고 그 크기를 정량적으로 계산할 수 있다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.222-222
• /
• 2003

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.473-478
• /
• 2009

The purpose of this study is to evaluate the behaviour of the plastic deformed zone at crack tip on the standard Charpy specimens which were taken from the multi-passed weld block of the pressure vessel steel. Notch was machined on the standard Charpy test specimens and pre-crack which was located around the fusion line was made under the repeat load. Four point bend and acoustic emission tests were carried out simultaneously. The size of plastic region at crack tip was calculated using stress intensity factor. Relationships between characteristics of acoustic emission and plastic zone size at crack tip were discussed through the cumulative AE energy. Regardless of the specimens, AE signals were absent within the elastic region almost and most of AE signals were produced at the plastic deformation region from yield point to the mid-point between yield and maximum load. More AE signals for the weldment were produced compared with the base-metal and PWHT specimen. Relations between plastic deformed zones at crack tip and cumulative AE energy for the weldment and PWHT specimen were different quietly from the base-metal. Besides, number of AE counts for the weldment was the larger than those of the base-metal and PWHT specimen.

• Journal of the Society of Naval Architects of Korea
• /
• v.35 no.4
• /
• pp.38-45
• /
• 1998

It is a tedious and excessive time consuming process to model the local area of crack tip part of structures in calculation of stress intensity factors by FEM. So, in this paper, the hybrid method of FEM and BEM approach was formulated to overcome this type of problems. The multi-domained BEM was adopted to simplify the modelling process of complex geometry and singularity characteristics of crack tip part and the ordinary FEM modelling was used in the rest part. The example calculations shows very good results compared with analytic solutions and other numerical method.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.6
• /
• pp.1183-1192
• /
• 1989

본 논문에서는 평면변형률 상태하에서 안정하게 성장하는 균열선단에 집중 되어있는 강소성역의 해석에 역점을 두어 재결정법과 탄.소성유한요소법을 도입하여 안정 성장균열 선단에 형성되는 균열 성장저항에 직접적인 영향을 미치고 있는 소성 역의 크기나 형태에 대한 실험 및 해석을 하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1051-1061
• /
• 2011

The influences of density variation on stress and displacement fields at a propagating Mode-III crack tip in orthotropic functionally graded materials (OFGMs) are studied. The crack propagates dynamically at a right angle to the gradient of physical properties. Three kinds of elasticity and density gradients are analyzed in this study. They are as follows: (1) the density varies without elasticity variation, (2) the directions of the density and elasticity gradients are opposite to each other, and (3) same. For these cases, the stress and displacement fields at the crack tip are developed and the dynamic stress intensity factors for propagating cracks are also studied. When the crack speed is low, the influence of density variation on the stresses and displacement is low. However, when the crack speed is high, this influence is very high.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.2
• /
• pp.243-251
• /
• 1989

Assuming plastic zones spreading out on each slip plane of the two materials under out-of-plane shear loading, the size of each plastic zone is computed. The effect of the different frictional shear stresses in the two materials on the size of each plastic zone and the relative displacement at the crack tip are investigated. The relation between the J-integral in this model and the relative displacement at the crack tip is also obtained.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.9
• /
• pp.985-996
• /
• 2012

An unsteadily propagating permeable crack in piezoelectric materials (PMs) under anti-plane shear mechanical loading and in-plane electric loading is studied. The equilibrium equations for a transiently propagating crack in a PM are developed, and the solutions on the stress and displacement fields for a permeable crack though an asymptotic analysis are obtained. The influences of piezoelectric constant, dielectric permittivity, time rate of change of the crack tip speed and time rate of change of stress intensity factor on the stress and displacement fields at the transiently propagating crack tip are explicitly clarified. By using the stress and displacements, the characteristics of the stress and displacement at a transiently propagating crack tip in a PM are discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.4 no.4
• /
• pp.43-55
• /
• 1987

본 연구는 Orthotropic 재료에 존재하는 균열선단에서의 응력장의 양상에 대하여 지금까지의 연구들에서 상세하게 고려되지 않았던 여러 탄성계수들의 영향을 평면-변형조건 하에서 고찰하였다. 여러 하중조건과 경계조건 하에서의 일반적인 이방성 재료에 존재하는 균열선단에서의 응력자의 양상도 고찰하였으며, $a_{11}S^4-2a_{16}S^3+(2a_{12}+a_{66})S^2-2a_{26}S+a_{22}=0$인 특성방정식의 4근은 Cardano와 Ferrar의 해법을 쓴 새로운 단순기법에 의해 해석하였고 특성방정식의 4근에 미치는 일반적인 이방성 재료의 물성치 즉 Exx, Eyy, Ezz, Gxy, ${\nu}_{zx}$, ${\nu}_{xy}$,${\nu}_{yz}$, ${\eta}$ ${\eta}$xy,x, ${\eta}$xy, y, ${\eta}$xy,z , 들의 영향들에 대해 상세히 연구되었다. 또한 균열선단부근에서의 응력분포 양상을 재료의 물성치와 경계조건 및 하중조건들로써 체계적으로 연구하였다.

• Composites Research
• /
• v.16 no.4
• /
• pp.44-50
• /
• 2003

The damage zone around a crack tip occurring before the fracture is a significant domain. which affects the toughening mechanism of materials. In this study. the growth process of damage zone in the vicinity of crack tip for rubber-modified epoxy resin is investigated using an acoustic emission(AE) analysis. The weight fractions of rubber(CTBN 1300$\times$B) in rubber-modified epoxy resin are 5 wt% and 15 wt%. The fracture toughness($K_{IC}$) and the fracture energy($G_{IC}$) were measured using 3 point bending single-edge notched specimens. The damage zone and rubber particles distributed around the crack tip were observed by a polarized optical microscope and an atomic force microscope(AFM). The damage zone around crack tip of rubber-modified epoxy resin was formed at 13 % loading and developed until 57 % loading of the fracture load. The crack initiated at 57 % loading grew repeatedly in the stick-slip propagation behavior. Based on time-frequency analysis, it was confirmed that AE signals with frequency bands of 0.15~0.20 MHz and 0.20~0.30 MHz were generated from cavitation and stable/unstable cracking inside the damage zone.