• Journal of the Korean Geographical Society
• /
• v.41 no.6 s.117
• /
• pp.701-713
• /
• 2006

This study considers the case when a district with a high development possibility is set up as a regulation region. Initial assumption is that there would be regulation resistance in and around the regulation region. Pyeongchang is taken as a study areas, performing necessary analysis of environment regulation and regulation resistance based upon spatial analysis with the use of GIS. The research proceeding steps are as follows. After examining Pyeongchang present environment regulation state, environment regulation map is constructed, and classification of Pyeongchang's relatively development possibility level map is made. Using this regulation map and development possibility level map, relative regulation resistance level is measured. The results that the rates of Pyeongchang environment regulation region in its present state was higher than Namhan river basin's regulation region rates. Also, overlapping a high development possibility level region with an environment regulation region, the analysis results give reasons to expect high level of regulation resistance in Doam-myeon and Jinbu-myeon in small town units. The analysis of Pyeongchang new buildings locations with regard to environment regulation showed intensive distribution in the regulation region with high development possibility level and adjacent areas (about 66% of new buildings are distributed within 500m range from regulation region). Such results show that the local administration and existing environment regulation policy, not capable of offering direct benefit to the population, are having immanent problems in environment sustainable development and connected with it environment harm causation.

• Proceedings of the KGS Conference
• /
• 2006.06a
• /
• pp.140-142
• /
• 2006

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.628-631
• /
• 2010

환경문제에 대한 관심으로 자동차에 대한 경량화가 요구되는 동시에 안전규제가 강화 되고 있어, 높은 인장강도를 가지는 고강도 강의 차체 적용 비율이 점차 증가하고 있다. 또한, 자동차 1대를 조립하기 위한 저항 점용접 횟수를 줄이고, 용접부에 충격안정성을 확보하기 위한 관심이 고조되고 있다. 따라서, 국내 자동차 산업에서 용접부의 신뢰성을 보장하기 다양한 비파괴 검사를 적용하고 있으며, 생산 공정에 적용하고 있다. 그중에서 용접 전극 사이에서 동저항(Dynamic resistance, 용접 공정중모재의 저항값의 변화)을 계측하여 용접성을 평가하는 방법이 제시되고, 차체 조립공정 중에 적용하려는 시도가 이루어지고 있다. 본 연구에서는 자동차 차체용 냉간 압연강판(590MPa dual-phase steel)을 인버터 DC 저항 점 용접하여, 용접전극 사이에서 동저항을 측정 하였다. 용접성은 인장전단 강도로 평가하였고, 용접 공정 변수는 용접 전류, 용접 시간, 가압력을 선정하였다. 동저항 그래프의 ${\alpha}$-peak와 ${\beta}$-peak값을 인장전단 강도에 따라 회귀 분석하여, 동저항에 따른 인장전단 강도를 예측하였다. 추가적으로, 용접부의 외관 형상 중에 압흔 깊이와 압흔자국 지름에 대한 회귀분석을 실시하였으며, 용접부 형상에 대한 신뢰성을 부여하였다.

• Journal of Korean Home Economics Education Association
• /
• v.24 no.1
• /
• pp.49-59
• /
• 2012

This research aimed at identifying the influential factors on high school students' dress code compliance. Specifically, the relationship between the perceived strength and importance of dress codes and dress code compliance, and the relationship between dress code compliance and creativity, self esteem, and school adaptation were examined. For this purpose, reliability tests, multiple regressions, and t-tests were conducted using the data collected from 866 male and female students from six Co-Ed high schools located in Seoul. The results are as follows. First, the more students perceived the school dress codes to be stronger and more important, they were more likely to comply to the dress codes. Second, compared to the low-compliance group, the high-compliance group had higher self-esteem and creativity. Third, compared to the low-compliance group, the high-compliance group showed better adaptation to their teachers, classes, and school rules. However, the two groups were not significantly different in terms of their adaptation to peer groups.

• Korean journal of communication and information
• /
• v.48
• /
• pp.25-45
• /
• 2009

The convergence of broadcasting & telecommunication is not a reality by itself, but recognized as a reality by the discourse which defines and explains it. It is the premise from which this article aims at studying how the discourse on the broadcasting-telecommunication convergence is formed, practised and transformed. This study compares the case of France with the case of Korea in order to show how the same discourse can engender different consequences and evolve in a different way in different socio-political situations. The discourse of the convergence was born as a scientific knowledge in the reports of the European Commission and OECD, and accepted as an important object generating social debates. Then, the discourse faces the resistance of pre-existent discourses in France, while it spreads without clash in South Korea. The French discourse results in a horizontal regulation of contents and networks, while the Korean discourse creates a unique regulator for both traditionally distinguished sectors. Finally, unlike France, the scientific discourse of the convergence in South Korea is transformed into even a political, imaginary or utopian discourse.

• Proceedings of the KSEE Conference
• /
• 2004.08a
• /
• pp.49-75
• /
• 2004

소음진동 규제법의 강화, 각종 건설민원 발생 및 안전강화 관리 차원에서 현재 국내 터파기 현장 및 각종 토공사에서 종래 시행되어지던 발파공법만으로 시행하는 것은 곤란하다. 건설교통부 설계 지침에서도 진동 규제치의 차이를 두어 파쇄와 발파와의 차이를 확연히 구분하는 실정이다. 기존에 발파는 그 경험이 많아 효과적인 방법 등이 널리 알려져 있지만 파쇄의 경우는 그 시공사례가 많지 않아 그 연구의 필요성이 대두되고 있다. 본 연구는 건교부에서 제시한 암파쇄굴착공법에 사용되어지는 미진동 파쇄기에 대한 연구로써 연암, 보통암, 경암지역에서의 전색제, 적정 패턴, 진동 특성 등을 분석하는데 그 목적이 있다. 시험은 크게 1, 2 타입으로 구분하여 실시하였으며 1타입의 경우는 천공장이 1.5m(180g 장약)이고, 2타입의 경우는 2.5m(360g)이다. 두 패턴을 기본으로 저항선, 공간격을 달리하여 시험을 진행하면서 그에 따르는 진동 및 파쇄정도의 차이를 관찰할 수 있었으며 암석 강도별 예상 진동식을 제안하였다.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05b
• /
• pp.761-766
• /
• 1995

STS 316L 강은 합금성분 중 탄소 함량을 0.03wt.% 이하로 규제하여 내식성이 향상되었고 용접 후 열처리가 불필요하여 널리 사용되어 왔으나, 탄소의 함량이 낮아 강도가 낮으므로 N을 첨가하여 강도를 높인 강으로 대체되는 추세이다. STS 316L 강에 첨가되는 N함량을 0.041∼0.15wt.% 범위로 변화시켜 N 첨가량에 따라 열간 압연 중 변형저항이 변화되는 정도를 측정하였으며, 동시에 최종제품의 기계적 성질, 입계예민화 정도, 충격특성 및 내 SCC성 변화를 조사하였다. N 첨가량이 증가할수록 열간 압연은 힘들어지나, 품질특성은 향상됨을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.399-404
• /
• 2015

The cost of fuel in ships has recently increased due to a rapid increase in international oil prices and international restrictions regarding the greenhouse effect generated from the burning of fuel. Therefore, different methods for changing the hull designs for improving energy efficiency, developing coating for reducing friction resistances, developing additives for improving engine thermal efficiency, and low-speed operation for reducing fuel consumption have been considered. The developments of high-speed, large-scale, and energy-saving vessels are deemed essential to adapt to the recent high oil price era. Therefore, it is important to analyze Precisely the qualitative and quantitative changes in the resistance value of the local areas of the hull surface. In this study, the engine performance before and after docking was analyzed to examine friction resistance caused by marine growth on the hull as a basic study for improving the energy efficiency. The result was then presented by comparing it with the previous data for 2.5 years between docks to investigate the performance of the main engine, the change in friction resistances and loads, the fuel consumption and ship speed.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1070-1077
• /
• 2022

The International Maritime Organization has recently strengthened its marine environment regulations. The energy efficiency index has long been an important indicator of ship design, and now, energy efficiency is being enforced for existing ships as well as new ships. To increase the energy efficiency of existing ships, methods such as retrofitting the bow bulb, selecting an optimized trim during ship operation, and installing an energy saving device have been applied. In this study, the ship resistance was numerically simulated using computational fluid dynamics (CFD) under various bow and stern trim conditions. In addition, the bulb was redesigned to further improve the resistance performance under the selected trim conditions. When the improved bulb was applied, the effective horse power increased by approximately 5%. It is, however, necessary to verify whether the redesigned bulb can reduce ship resistance in waves.

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.122-129
• /
• 2018

Purpose : This study aims to seek out the risk of low-temperature burns and fire. Method : Hot vests are connected by higher voltage than walking voltage. Results : Accordingly, the possibility of low-temperature burns and fire was proved high. It was also shown that hot vests with relatively lower resistance on heat rays reached a higher temperature as the same voltage was applied. Conclusion : There are some problems with hot vests because they do not have any safety devices like a thermostat or a timer to prevent temperature increasing rapidly. For the purpose of reducing the risk of low-temperature burns and fire, setting the standard of the minimum resistance temperature and regulating the use of heat rays with lower resistance are necessary.