• Korea and Global Affairs
• /
• v.3 no.2
• /
• pp.5-58
• /
• 2019

The purpose of this article is to bring about 10.26 accident by providing a fuse for the overthrow of the Park Chung-hee administration in the 10.18 Buma uprising. So, first of all, this article has a main purpose in analyzing the comparison between Masan's 3.15 uprising and 10.18 Buma uprising. The purpose of the study is to compare the 3.15 democratic movement in Masan with the 10.18 Buma uprising, given that the incident laid the foundation for the dictator to be overthrown in the event of an anti-dictatorial movement in Masan. The research method of this article is intended to be used as a research method in the 3.15 and 10.18 protests, given that if a person in power conducts election fraud or suppresses anti-government movements in order to maintain the system, it could lead to the destruction of those in power. In the end, the Masan 3.15 uprising and 10.18 uprising failed to reach a direct attempt to overthrow the regime due to unfinished democratic movements, but with the revolution of 4.19 and the massive political transformation of 10.26 Accident, he achieved the leading role theory that allowed the Rhee Syngman and Park Chung-hee administrations. In eradicating authoritarian regimes, however, the historic significance of the democratization movement was that the authoritarian regime eventually brought about the collapse of the regime by making a hard-line stance on election schemes or popular protests over the trap of power boomerang, which causes the regime to collapse.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.11-21
• /
• 2019

The purpose of this study is to evaluate the awareness and usability of descending life lines and simple descending life lines for fire situations in the accommodation of the public officials who are responsible for supervising the installation and maintenance of descending life lines and simple descending life lines. The main results of the study are summarized as follows. First, in comparison of the ability to distinguish between descending life lines and simple descending life lines, the majority of female public officers in general administrative services do not have the ability to distinguish between descending lifelines and simple descending life lines, so they should be able to improve their ability to distinguish descending life lines. Also, institutional strategies are needed to regularly receive education through the Safety Experience Center in order to prevent safety accidents such as falling in emergency situations. Second, as a result of verifying reusability of simple descending life lines by gender and occupation, most public officers with the exception of half of the firefighting officers were analyzed as having no ability to reuse the simple descending life lines. Therefore, it is necessary to change the relevant laws so that only the installation of descending life lines which can be used continuously is permitted, except for the simple descending life lines among the evacuation instruments to be additionally installed in each room of the accommodation. Third, in terms of the ability to perceive the maximum load of the descending life lines according to occupation, the perception ability of the rescuers was the highest and the perception ability of the fire service personnel was the lowest. In order to improve the perception abilities of the fire service personnel, it is necessary to strengthen the theoretical and practical education of descending life lines in collective education such as the command-enhancing training which is regularly carried out in fire service academy. Lastly, it is believed that it is more effective to conduct the experience training of the descending life lines by imagining the fire in accomodations rather than other facilities, because it is the location where fires are actually seen the most.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.4
• /
• pp.60-77
• /
• 2021

From 2007 to 2011, four Goryeo Dynasty vessels, namely the Taean treasure ship, Taean Mado Shipwreck No.1, No.2, No.3 were discovered in Taean area, Chungcheongnam-do province. From the shipwrecks, 175 pieces of mokkan (wooden tablet) were excavated. These mokkans are the only case of Goryeo Dynasty and represent the unique usage of mokkan as cargo tags, after the paper replaced the wooden tablets as writing materials. The Taean mokkans provide details, such as the year, recipient, port of origin, types of the cargo, quantity and unit, the name of the responsible person for shipment. Thus, they enable us to speculate about the characteristics of the cargo. Furthermore, through studying the writing style, form, material and manufacturing method, researchers can extract which form and characteristics were favored at that time. The Taean mokkans have no preset style for writing. Therefore, they can be written selectively and freely. And since the mokkan were attached to cargos, mokkans with furrows on upper side were favored, and efficiency and simplification of the manufacturing process were priorities in making mokkans. The Taean mokkans can be compared to those from the Shinan ship and the Quanzhou ship because those are of the same era and use. On the writing styles and information, Chinese mokkans are focused on the cargo owners, while The Taean mokkan includes more detailed information, such as the recipients. In forms, Chinese mokkans have maximum thickness of 1.0 centimeter and have pointed edges in lower parts, while mokkans from Taean do not have fixed thickness or edges. Furthermore, Chinese mokkans and Korean mokkans have different styles from manufacturing methods and material selections. These differences between Chinese and Goryeo mokkan are related to the differences between littoral-transport Goryeo ships and ocean-transport Chinese ships, such as shipping distances, types of cargo, shipping systems, packing methods, and transport operators. At the moment, because there are only small amount of data and materials of Chinese mokkan, comparative studies regarding Goryeo and Chinese mokkan can only be fragmentary. However, this article can be a base from which to expand the scope of Goryeo mokkan studies.

• The Korean Journal of Archival Studies
• /
• no.13
• /
• pp.91-134
• /
• 2006

In general, personally collected archives, manuscripts, are physically badly conditioned and also contextual of the archives and information on the history of production is mostly collected partly in the manuscripts. Therefore they need to control the name of the producers on the archives collected in various ways effectively and accumulate provenance information which is the key element when understanding the production background in the collecting repository. Here, the authority control and provenance information management must be organized from the beginning of acquisition and this means to collect necessary information considering control process of acquisition as well. This thesis is for verifying the necessity of the authority control in collecting repository and accumulation of the provenance information and for suggesting the things to be considered as collecting Archival authority system. For all these, this thesis shows that it has checked out the necessity of the authority control in archival management and archival authority control and researched the standard of archival authority control, work process and accumulation process. Archival provenance information management and authority control in the archival authority control system are organized through the whole steps of the archival management starting from the lead file to the name of the producers at archival registration and archival description at acquisition. And a lot of information is registered and described at the proper point of time and finally all the information including authority control which controls the Heading in the authority management must be organized to use them as an intellectual management of archives and Finding Aids. The features of the Archival authority system are as follows; first of all, Authority file type which is necessary at the archival authority control of democracy movement is made up of the name of the group, person, affair and terminology(subject name). Second of all, basic record structures and description elements in authority collection of Korea Democracy Foundation Archives apply in the paragraph 1 of ISAAR(CPF) adding some necessary elements and details of description rule such as spacing words and using the periods apply in the paragraph 4 of KCR coping with the features of the archival management system. And also the way of input on the authority record is based on EAC(Encoded Archival Context). Third of all, it made users approach to the sources which they want more easily by connecting the authority terms systemically making it possible to connect the relative terms with up and down words, before and after words variously and concretely expanding the term relations rather than earlier traditional authority system which is usually expressed only with relative words (see also). So the authority control of archival management system can effectively collect and manage the function of various and multiple groups and information on main activities as well as its own function which is controlling the Heading and express the multiple and intermediary relationship between archives and producers or between producers and it also provides them with expanded Record information service which satisfies user's various requests through Indexing service. Finally applying in this international standard ISAAR(CPF) through the instance of the authority management like this, it can be referred to making Archival authority system in Collecting repository hereafter by reorganizing the description elements into appropriate formations and setting up the authority file type which is to be managed properly for every service.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.4
• /
• pp.283-290
• /
• 2018

BACKGROUND: Pesticide residue analysis is an essential activity in order to establish the food safety of agricultural products. Analytical approaches to the food safety are required to meet internationally the guideline of Codex (Codex Alimentarius Commission, CAC/GL 40). In this study, we developed a liquid chromatograph-tandem mass spectrometer (LC-MS/MS) method to determine the herbicide clopyralid in food matrixes. METHODS AND RESULTS: Clopyralid was extracted with aqueous acetonitrile containing formic acid and the extracts were mixed in a citrate buffer consisted of magnesium sulfate anhydrous, NaCl, sodium citrate dihydrate and disodium hydrogencitrate sesquihydrate followed by centrifugation. The supernatants were filtered through a nylon membrane filter and used for the analysis of clopyralid. The method was validated by accuracy and precision experiments on the samples fortified at 3 different levels of clopyralid. LC-MS/MS in positive mode was employed to quantitatively determine clopyralid in the food samples. Matrix-matched calibration curves were inearranged from 0.001 to 0.25 mg/kg with r2 > 0.994. The limits of detection and quantification were determined to be 0.001 and 0.01 mg/kg, respectively. There covery values of clopyralid for tified at 0.01 mg/kg in the control samples ranged from approximately 82 to 106% with relative standard deviations below 2 0%. CONCLUSION: The method developed in this study meets successfully the Codex guideline for pesticide residue analysis in food samples. This, the method could be applicable to determine pesticides in foods produced domestically and internationally.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.3
• /
• pp.43-54
• /
• 2019

In this study, results of completion inspection are investigated according to the performance of the firefighting construction supervision personnel and according to the necessity of clean air supply in a performance test of the firefighting construction supervision personnel. The results of the completion inspection are measured and the causes of defects in the fire protection facilities after issuance of a completion inspection certificate are analyzed. The findings of this investigation can be used to minimize the risk of apartment fires and improve the performance of firefighting construction supervision personnel. The results of this study are summarized as follows. First, the results of the completion inspection conducted by the firefighting construction supervision personnel varies according to particular occupation. The performance of fire facility supervisors from design companies and fire construction companies were significantly higher than the fire officers. Therefore, it is necessary to employ supervisors who have experience in supervising the construction of apartments, in order to improve the performance of fire construction supervision officers. Second, the analysis of the completion inspection results according to the necessity of a clean air supply for performance tests of firefighting construction supervision personnel showed that the necessity of a clean air supply was significantly higher for fire facility supervisors from design companies and fire construction companies than for the fire officers. In order to improve, the completion inspection should be carried out up until the completion date of the building. In addition, a system needs to be established to ensure that clients are not able to demand that a completion inspection certificate be issued on the construction completion date. Finally, it is found that defects of completion inspection after issuance of a completion inspection certificate affects the result of the completion inspection. The results of the completion inspections conducted by the fire facility supervisors from design companies and fire construction companies were affected significantly less by defects than that of the general contractors. Research shows that faults have occured in firefighting facilities after the issuance of a completion inspection certificate due to the client and the construction company demanding the issuance of the completion inspection certificate.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.2
• /
• pp.61-67
• /
• 2019

This study was conducted to investigate the effect of supplementary feeding levels on livestck and forage productivity and grazing intensity in Elk stags (Cervus canadensis). A fifteen 2-year-old Elk stags about 195 kg were randomly assigned to one of three dietary treatments (five animals per treatment). The dietary treatments consisted of a feeding concentrate of 1.0% of body weight (T1), 1.5% of body weight (T2) and 2.0% of body weight. Total dry matter intake (TDMI) was increased with increased with an increasing supplementary feeding levels. Average daily gain (ADG) were significantly increased with an increasing supplementary feeding levels (p<0.05) and reached a maximum on July and was lower in spring than autumn. The velvet antler production was no differences among treatment groups. Forage productivity of pasture and crude protein content were highest on May and decreased thereafter, however, crude fiber content was the reversed. The grazing intensity of Elk stags was increased in spring (38 to 59 head per ha) than summer and autumn (13 to 32 head per ha). The average grazing intensity of Elk stags ranged from 21 to 34 head per ha, which is affected by supplementary feeding levels. This result suggests that feeding supplementary diet at 1.5 % of body weight was needed to maintain the stable wight gain in antler growing periods and control the proper grazing intensity of Elk deer stags.

• Journal of the Korean Society of Radiology
• /
• v.12 no.7
• /
• pp.895-908
• /
• 2018

As modern science is developed and advanced, examination and number of times using radiation are increasing daily. General diagnostic X-ray generator is installed on stationary form, But X-ray generator was developed because patient who is in the intensive care unit, operation room, emergency room can not move to general x-ray room. What we examine patient by x-ray generator is certainly necessary, So patient exposure is inevitable. but reducing radiation exposure is highly important matter about radiation technology, guardian, patient in the same hospital room, nurse etc. For this reason, rule regarding safety control of diagnostic x-ray generator revised for radiation worker, patient and protector proclaim that mobile diagnostic x-ray shield must placed in case of examine different location excluding operation room, emergency room, intensive care unit. But, radiogical technologist is having a lot of difficulties to examine with mobile x-ray generator, diagnostic x-ray shield partition, image plate and lead apron. So, when we use x-ray generator, we manufacture shield tools can be attached to the mobile x-ray generator On behalf of x-ray shield partition and conduct analysis and in comparison to part of body and distribution of dose rate and find way to reduce radiation exposure through distribution of dose rate of patient within the radiogical technologist, medical team. Mobile x-ray generator aimed at SHIMADZU inc. R-20, We manufactured equipment for shielding x-ray scattered x-ray by installing shielding wall from side to side based on support beam on the mobile x-ray generator. Shielding wall when moving can be folded and designed to expand when examine. Experiment measured five times in each by an angle for dose rate of eyes, thyroid, breast, abdomen and gonad on exposure condition of upper and lower extremity, chest, abdomen which is examined many times by mobile x-ray generator. We used dosimeter RSM-100 made by IJRAD and measured a horizontal dose rate by body part. The result of an experiment, shielding decreasing rate of the front and the rear showed 77 ~ 98.7%. Therefore using self-production shielding wall reduce scattered x-ray occurrence rate and confirm can decrease exposure dose consequently. Therefore, through this study, reduction result which is used shielding wall of self-production will be a role of shielding optimization and it could be answer about reduction of medical exposure recommended by ICRP 103.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.848-857
• /
• 2018

Recently, around the world, active development of new renewable energy sources including solar power, waves, and fuel cells, etc. has taken place. Particularly, floating offshore wind farms have been developed for saving costs through large scale production, using high-quality wind power and minimizing noise damage in the ocean area. The development of floating wind farms requires an evaluation of the Maritime Safety Audit Scheme under the Maritime Safety Act in Korea. Floating wind farms shall be assessed by applying the line and area concept for systematic development, management and utilization of specified sea water. The development of appropriate evaluation methods and standards is also required. In this study, proper standards for marine traffic surveys and assessments were established and a systemic treatment was studied for assessing marine spatial area. First, a marine traffic data collector using AIS or radar was designed to conduct marine traffic surveys. In addition, assessment methods were proposed such as historical tracks, traffic density and marine traffic pattern analysis applying the line and area concept. Marine traffic density can be evaluated by spatial and temporal means, with an adjusted grid-cell scale. Marine traffic pattern analysis was proposed for assessing ship movement patterns for transit or work in sea areas. Finally, conceptual design of a Marine Traffic and Safety Assessment Solution (MaTSAS) was competed that can be analyzed automatically to collect and assess the marine traffic data. It could be possible to minimize inaccurate estimation due to human errors such as data omission or misprints through automated and systematic collection, analysis and retrieval of marine traffic data. This study could provides reliable assessment results, reflecting the line and area concept, according to sea area usage.

• Journal of Food Hygiene and Safety
• /
• v.34 no.2
• /
• pp.148-157
• /
• 2019

An optimized analytical method for sodium iron chloriphyllin in foods was established and verified by using high performance liquid chromatography with attached diode array detection. An Inertsil ODS-2 column and methanol-water (80:20 containing 1% acetate) as a mobile phase were employed. The limit of detection and quantitation of sodium iron chloriphyllin were 0.1 and 0.3 mg/kg, respectively, and the linearity of calibration curve was excellent ($R^2=0.9999$). The accuracy and precision were 93.9~104.95% and 2.0~7.7% in both inter-day and intra-day tests. Recoveries for candy and salad dressing were ranged between 93 and 104% (relative standard deviation, (RSD) 0.3~4.3%), and between 83 and 115% (RSD 1.2~2.0%), respectively. Liquid chromatography mass spectrometry was used to verify the main components of sodium iron chlorophyllin which were Fe-isochlorin e4 and Fe-chlorin e4.