• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.15 no.2
• /
• pp.109-116
• /
• 2022

In this paper, we propose a band rejection filter (BRF) with a state variable filter (SVF) structure to effectively remove the influence of 60 Hz line frequency noise introduced into the sensor system. The conventional BRF of the SVF structure uses an additional operational amplifier (OPAMP) to add a low pass filter (LPF) output and a high pass filter (HPF) output or an input signal and a band pass filter. Therefore, the notch frequency and the notch depth that determine the signal attenuation of the BRF greatly depend on the tolerance of the resistors used to obtain the sum or difference of the signals. On the other hand, in the proposed BRF, since the BRF output is formed naturally within the SVF structure, there is no need for a combination between each port. The notch frequency of the proposed BRF is 59.99 Hz, and it can be confirmed that it is not affected at all by the tolerance of the resistor through the Monte Carlo simulation results. The notch depth also has an average of -42.54dB and a standard deviation of 0.63dB, confirming that normal operation as a BRF is possible. Also, with the proposed BRF, noise filtering was applied to the electrocardiogram (ECG) signal that interfered with 60 Hz noise, and it was confirmed that the 60 Hz noise was appropriately suppressed.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.3
• /
• pp.173-178
• /
• 2024

This study presents a technique for assessing the dimensional quality of assembly parts in Prefabricated Steel Structures (PSS) using a stereo vision sensor. The stereo vision system captures images and point cloud data of the assembly area, followed by applying image processing algorithms such as fuzzy-based edge detection and Hough transform-based circular bolt hole detection to identify bolt hole locations. The 3D center positions of each bolt hole are determined by correlating 3D real-world position information from depth images with the extracted bolt hole positions. Principal Component Analysis (PCA) is then employed to calculate coordinate axes for precise measurement of distances between bolt holes, even when the sensor and structure orientations differ. Bolt holes are sorted based on their 2D positions, and the distances between sorted bolt holes are calculated to assess the assembly part's dimensional quality. Comparison with actual drawing data confirms measurement accuracy with an absolute error of 1mm and a relative error within 4% based on median criteria.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.429-430
• /
• 2012

• 전기의세계
• /
• v.38 no.5
• /
• pp.25-33
• /
• 1989

이 논문에서 포항바사광 가속기의 저장링 자석 격자 구조의 각종 파라미터와 성질들을 제시했다. 충분한 역학적 구경을 가지고 있는 것으로 보여졌으며 각종 자석의 오차에 대해 상대적으로 덜 민감하다고 생각되어진다. 앞으로 이 격자에 대한 빔의 군집효과(collective effects)에 관한 연구가 진행 될 것이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.1031-1032
• /
• 2009

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.567-568
• /
• 2009

• 방재와보험
• /
• s.108
• /
• pp.18-23
• /
• 2005

목조 건축물 문화재를 화재 등의 재난으로부터 보호하기 위한 다양한 노력을 통해 민족의 자부심이 되어온 귀중한 문화재의 가치를 보전해야 한다. 사찰, 궁궐 등 아름다운 목조 건축물을 보고 느끼는 즐거움을 유지하고 후세에 전하기 위해서는, 한치의 오차도 없는 화재예방을 염두에 두고 목재의 방화처리 및 목구조의 화재안전 대책을 마련해야 할 것이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.803-804
• /
• 2011

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.12 no.3
• /
• pp.447-455
• /
• 1999

An adaptive mesh generation scheme is developed for effective non-linear analysis of the shell structures under large deformation. In particular, based on a posteriori error estimation, remeshing method on each load step is of primary interest here. An advancing front method, called paving method, is adopted for remeshing. It can be known that the adaptive mesh generation using contours of spacing values obtained from stress errors has an advantage in the adaptive analysis of the shell structures.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.83-90
• /
• 1999

본 논문에서는 금후 널리 사용되리라고 예상되는 장대 유연한 해양구조계의 동적 응답에 대한 능동제어를 다루었다. 제어기법으로는 optimal, adaptive 제어와 우주구조물의 진동제어에 사용되는 LAC/HAC 제어를 도입하여 simulation과 모형실험을 수행하였다. 기존의 발표된 최적제어 실험결과는 만족스럽지 못하여 다시 수행할 필요성이 있었다. 그 결과, 해양구조계의 위치 및 탄성변형이 타당한 제어력 범위내에서 제어가 되어 본 연구에서 제안한 제어시스템의 유효성이 입증되었다. 또한 제어기법간의 비교를 통하여 장대 유연한 해양구조계에 대한 최적의 제어기법에 대하여 조사를 하였는데, 초기 시스템 파라미터의 추정에 오차가 있는 경우 적응제어 알고리즘의 장점을 확인할 수가 있었다.