• Economic and Environmental Geology
• /
• v.56 no.3
• /
• pp.311-330
• /
• 2023

Development of Carbon Capture and Storage (CCS) technique is becoming increasingly important as a method to mitigate the strengthening effects of global warming, generated from the unprecedented increase in released anthropogenic CO₂. In the recent years, the characteristics of basaltic rocks (i.e., large volume, high reactivity and surplus of cation components) have been recognized to be potentially favorable in facilitation of CCS; based on this, research on utilization of basaltic formations for underground CO₂ storage is currently ongoing in various fields. This study investigated the feasibility of underground storage of CO₂ in basalt, based on the examination of the CO₂ storage mechanisms in subsurface, assessment of basalt characteristics, and review of the global research on basaltic CO₂ storage. The global research examined were classified into experimental/modeling/field demonstration, based on the methods utilized. Experimental conditions used in research demonstrated temperatures ranging from 20 to 250 ℃, pressure ranging from 0.1 to 30 MPa, and the rock-fluid reaction time ranging from several hours to four years. Modeling research on basalt involved construction of models similar to the potential storage sites, with examination of changes in fluid dynamics and geochemical factors before and after CO₂-fluid injection. The investigation demonstrated that basalt has large potential for CO₂ storage, along with capacity for rapid mineralization reactions; these factors lessens the environmental constraints (i.e., temperature, pressure, and geological structures) generally required for CO₂ storage. The success of major field demonstration projects, the CarbFix project and the Wallula project, indicate that basalt is promising geological formation to facilitate CCS. However, usage of basalt as storage formation requires additional conditions which must be carefully considered - mineralization mechanism can vary significantly depending on factors such as the basalt composition and injection zone properties: for instance, precipitation of carbonate and silicate minerals can reduce the injectivity into the formation. In addition, there is a risk of polluting the subsurface environment due to the combination of pressure increase and induced rock-CO₂-fluid reactions upon injection. As dissolution of CO₂ into fluids is required prior to injection, monitoring techniques different from conventional methods are needed. Hence, in order to facilitate efficient and stable underground storage of CO₂ in basalt, it is necessary to select a suitable storage formation, accumulate various database of the field, and conduct systematic research utilizing experiments/modeling/field studies to develop comprehensive understanding of the potential storage site.

• Journal of Venture Innovation
• /
• v.6 no.1
• /
• pp.181-198
• /
• 2023

This study aims to analyze the influence of organizational support perception of workers in medical institutions on intrinsic job motivation, and to check whether there is significance in the mediating effect of work-family conflict and work-family balance factors in this process. The results of empirical analysis through the questionnaire are as follows. First, it was confirmed that organizational support recognition had a significant positive effect on work-family balance as well as intrinsic job motivation, and work-family balance had a significant positive effect on intrinsic job motivation. Second, it was confirmed that organizational support recognition had a significant negative effect on work-family conflict, but work-family conflict had no significant influence on intrinsic job motivation. Third, in order to reduce job stress for medical institution workers, it is necessary to reduce job intensity, assign appropriate workload for ability. And in order to improve manpower operation and job efficiency, Job training and staffing in the right place are needed. Fourth, in order to improve positive organizational support perception and intrinsic job motivation, It is necessary to induce long-term service by providing support and institutional devices to increase attachment to the current job and recognize organizational problems as their own problems with various incentive systems. The limitations of this study and future research directions are as follows. First, it is believed that an expanded analysis of medical institution workers nationwide by region, gender, medical institution, academic, and income will not only provide more valuable results, but also evaluate the quality of medical services. Second, it is necessary to reflect the impact of the work-life balance support system on each employee depending on the environmental uncertainty or degree of competition in the hospital to which medical institution workers belong. Third, organizational support perception will be recognized differently depending on organizational culture and organizational type, and organizational size and work characteristics, working years, and work types, so it is necessary to reflect this. Fourth, it is necessary to analyze various new personnel management techniques such as hospital's organizational structure, job design, organizational support method, motivational approach, and personnel evaluation method in line with the recent change in the government's medical institution policy and the global business environment. It is also considered important to analyze by reflecting recent and near future medical trends.

• Information Systems Review
• /
• v.21 no.4
• /
• pp.143-156
• /
• 2019

Types of innovation can be categorized into simplification, information, automation, and intelligence. Intelligence is the highest level of innovation, and RPA can be seen as one of intelligence. Robotic Process Automation(RPA), a software robot with artificial intelligence, is an example of intelligence that is suited for simple, repetitive, large-scale transaction processing tasks. The RPA, which is already in operation in many companies in Korea, shows what needs to be done to naturally focus on the core tasks in a situation where the need for a strong organizational culture is increasing and the emphasis is on voluntary leadership, strong teamwork and execution, and a professional working culture. The introduction was considered naturally according to the need to find. Robotic Process Automation, or RPA, is a technology that replaces human tasks with the goal of quickly and efficiently handling structural tasks. RPA is implemented through software robots that mimic humans using software such as ERP systems or productivity tools. RPA robots are software installed on a computer and are called robots by the principle of operation. RPA is integrated throughout the IT system through the front end, unlike traditional software that communicates with other IT systems through the back end. In practice, this means that software robots use IT systems in the same way as humans, repeat the correct steps, and respond to events on the computer screen instead of communicating with the system's application programming interface(API). Designing software that mimics humans to communicate with other software can be less intuitive, but there are many advantages to this approach. First, you can integrate RPA with virtually any software you use, regardless of your openness to third-party applications. Many enterprise IT systems are proprietary because they do not have many common APIs, and their ability to communicate with other systems is severely limited, but RPA solves this problem. Second, RPA can be implemented in a very short time. Traditional software development methods, such as enterprise software integration, are relatively time consuming, but RPAs can be implemented in a relatively short period of two to four weeks. Third, automated processes through software robots can be easily modified by system users. While traditional approaches require advanced coding techniques to drastically modify how they work, RPA can be instructed by modifying relatively simple logical statements, or by modifying screen captures or graphical process charts of human-run processes. This makes RPA very versatile and flexible. This RPA is a good example of the application of digital to intelligence(D2I).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.253-263
• /
• 2013

Frequency Scanning Interferometry(FSI) system, one of the most promising optical surface measurement techniques, generally results in superior optical performance comparing with other 3-dimensional measuring methods as its hardware structure is fixed in operation and only the light frequency is scanned in a specific spectral band without vertical scanning of the target surface or the objective lens. FSI system collects a set of images of interference fringe by changing the frequency of light source. After that, it transforms intensity data of acquired image into frequency information, and calculates the height profile of target objects with the help of frequency analysis based on Fast Fourier Transform(FFT). However, it still suffers from optical noise on target surfaces and relatively long processing time due to the number of images acquired in frequency scanning phase. 1) a Polarization-based Frequency Scanning Interferometry(PFSI) is proposed for optical noise robustness. It consists of tunable laser for light source, ${\lambda}/4$ plate in front of reference mirror, ${\lambda}/4$ plate in front of target object, polarizing beam splitter, polarizer in front of image sensor, polarizer in front of the fiber coupled light source, ${\lambda}/2$ plate between PBS and polarizer of the light source. Using the proposed system, we can solve the problem of fringe image with low contrast by using polarization technique. Also, we can control light distribution of object beam and reference beam. 2) the signal processing acceleration method is proposed for PFSI, based on parallel processing architecture, which consists of parallel processing hardware and software such as Graphic Processing Unit(GPU) and Compute Unified Device Architecture(CUDA). As a result, the processing time reaches into tact time level of real-time processing. Finally, the proposed system is evaluated in terms of accuracy and processing speed through a series of experiment and the obtained results show the effectiveness of the proposed system and method.

• Journal of Plant Biotechnology
• /
• v.39 no.1
• /
• pp.33-48
• /
• 2012

As a scientific curiosity to understand the structure and the function of crops and experimental efforts to apply it to plant breeding, genetic maps have been constructed in various crops. Especially, in the case of Brassica crop, genetic mapping has been accelerated since genetic information of model plant $Arabidopsis$ was available. As a result, the whole $B.$ $rapa$ genome (A genome) sequencing has recently been done. The genome sequences offer opportunities to develop molecular markers for genetic analysis in $Brassica$ crops. RFLP markers are widely used as the basis for genetic map construction, but detection system is inefficiency. The technical efficiency and analysis speed of the PCR-based markers become more preferable for many form of $Brassica$ genome study. The massive sequence informative markers such as SSR, SNP and InDels are also available to increase the density of markers for high-resolution genetic analysis. The high density maps are invaluable resources for QTLs analysis, marker assisted selection (MAS), map-based cloning and comparative analysis within $Brassica$ as well as related crop species. Additionally, the advents of new technology, next-generation technique, have served as a momentum for molecular breeding. Here we summarize genetic and genomic resources and suggest their applications for the molecular breeding in $Brassica$ crop.

• Journal of Korean Society of Forest Science
• /
• v.82 no.3
• /
• pp.235-245
• /
• 1993

This study was carried out to understand the stand structure based on the compositional characteristics of natural deciduous forest dominated by Quercus species, which will provide with fundamental ecological and silvicultural information for effective forest management. Of two tracts selected from the Seoul National University Research Forests, one is located in Kwangju-Gun Kyunggi-Do, and the other in Kwangyang-Gun Chollanam-Do. Point-quarter sampling method w-as employed to survey woody vegetation confined to larger than 6cm in DBH. The numbers of sample points were 152 and 187, in Kwangju-Gun and Kwangyang-Gun, respectively. Comparative analysis for two forest tracts was made as follows ; 1) species composition by calculation of importance values ; 2) number of stems per hectare for major tree species ; 3) species diversity for the forests in two locations ; 4) inter-species association based on $X^2$ test. The relative dominate of Quercus speices showed 88% at Kwangju-Gun, Kyunggi-Do and 50% at Kwangy-ang-Gun. Chollanam-Do. Such high dominance occurred due to high importance values of Quercus variahilis and Q. mortgolica in both locations. Quercus serrata showed low value at Kwangju-Gun. Kyunggi-Do whereas Q. acutissirna, Q. dentata and Q. aliena did none at Kwangyang-Gun. Chollanam-Do. The species diversity and evenness in oak communities exhibited 0.82 and 0.61, respectively at Kwangju-Gun. Kyunggi-Do, while those did 1.09 and 0.73 at Kwangyang-Gun, Chollanam-Do. Therefore, it was considered that Ku-angju-Gun region was disturbed severely by human activities but Kwangyang-Gun region eras less disturbed. Frequent appearance of Carpinus and Acer species indicates increase in diversities and better development of succession at Kwangyang-Gun region.

• Economic and Environmental Geology
• /
• v.39 no.2 s.177
• /
• pp.129-149
• /
• 2006

Previously published stratigraphic, sedimentologic, paleontologic, paleomagnetic and geophysical data are reviewed to make an understanding on the tectonic evolution of the Cretaceous Gyeongsang (Kyongsang) basin, southeast Korea. A stratigraphic framework and a tectonic model on the formation and deformation of the Gyeongsang Basin are newly proposed on the basis of integration these data with magmatism and mineralization ages in the basin. A newly proposed stratigraphic framework indicates that strata in the basin can be subdivided into five distinct stratigraphic units that represent pre-rifting, syn-rifting, inversion I, II, and III stages. The Gyeongsang Basin was formed initially as a pre-rifting stage due to north-south extension in the Late Jurassic prior to a syn-riftins stage that resulted from east-west extension during the Early Cretaceous. In the Late Cretaceous, the basin was deformed by three-staged sequential deformation of north-south, northwest-southeast, and east-west compressions. The tectonic history of the basin has been largely controlled by the change of motion of the Izanagi Plate from north to northwest during the Cretaceous. In the early Cretaceous, the Izanagi Plate began to subduct northward beneath the Eurasian Plate and caused the left-lateral strike-slip fault systems in the southern part of the peninsula. The left-lateral wrenching of these fault systems was causally linked to development of pull-apart basins, such as the Gyeongsang Basin in the southeastern part of the peninsula. However, northwestward movement of the Izanagi Plate during the Late Cretaceous probably led to the extensive volcanism as well as sequential deformations in the basin. The stratigraphic and tectonic model, which is newly proposed as a result of this study, may be expected to enhancing the efficiency for exploration and exploitation of useful mineral resources in the basin as well as establishing geologic history in the Cretaceous Gyeongsang Basin. Together with the spatial and temporal correlation of the Cretaceous basins in adjacent areas, this stratigraphic and tectonic model provides a new geologic paradigm to delineate the sophisticated tectonic history of East Asia turing the Cretaceous.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.3
• /
• pp.163-175
• /
• 1974

Effects on yields, yield components and nutrient content of potassium depression for two or three weeks at various growth stages were investigated in rice (var. Jinheung) under sand culture system.(K 40 ppm 1973) 1. Analysis of variance showed significant difference among treatments of both two-week (at p=0.01) and three-week depression (at p=0.05) in yield. 2. Most sensitive stage to potassium depression on yield appeared two weeks until heading (42% yield decrease) and sensitivity decreased the growth stage is apart from heading either before or after. During 30 days after transplanting two-week potassium depression increased yield, but three-week depression decreased yield. Until about 30 days after heading depression caused poor yield. 3. Root potassium involves in harvest index, filled grain ratio and grain weight with significant correlation and considerably in spikelet per panicle while potassium in leaf sheath+culm involves considerably in spikelet per panicle and panicle per hill. Relative total dry matter weight was significantly correlated with panicle per hill, spikelet per panicle and K or K/Ca+Mg only in leaf sheath+culm. The indications are that root potassium contributes for building sink and efficiency of structure while potassium in leaf sheat+culm primarily for building source, productive structure. 4. Relative yield was significantly correlated with potassium content in root and leaf sheath+culm and with K/Ca+Mg and its ratio before and after depression in root indicating that potassium depression occurs greatly in root and that K/Ca+Mg might have more important role than K content alone under depression. 5. Optimum level of $K_2O$ appears around 3% in leaf blade. 4% in leaf sheath+culm and 1% in root under the assumption that below these level the same content has the same role in relation to yield during growth. The K/Ca+Mg appeares to be 2.5 in root and should not decrease throughout the growth stages. 6. The increase of sodium content in plant by K depression was highest, especially in leaf sheath during the most insensitive period to K depression suggesting that insensitivity may be attributed to partial replacement of Na for K. Partial replacement seems very little in sensitive stage (later stage) and sensitive organ (root).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.239-246
• /
• 2017

There are various transversal structures (small dams or drop structures) in median and small streams in Korea. Most of them are concrete structures and it is so hard to exclude low-level water. Unless drainage valves and/or gates would not be installed near bottom of bed, sediment from upstream should be deposited and also contaminants attached to the sediments would devastatingly threaten the water quality and ecosystem. One of countermeasures for such problem is the bypass pipe installed underneath the transversal structure. However, there is still issued whether it would be workable if the gravels and/or stones would roll into and be not excluded. Therefore, in this study, the conditions to exclude the rip stone which enter into the bypass pipe was reviewed. Based on sediment transport phenomenon, the behavior of stones was investigated with the concepts from the critical shear stress of sediment and d'Alembert principle. As final results, the basis condition (${\tau}_c{^*}$) was derived using the Lagrangian description since the stones are in the moving state, not in the stationary state. From hydraulic experiments the relative velocity could be obtained. In order to minimize the scale effect, the extra wide channel of 5.0 m wide and 1.0 m high was constructed and the experimental stones were fully spherical ones. Experimental results showed that the ratio of flow velocity to spherical particle velocity was measured between 0.5 and 0.7, and this result was substituted into the suggested equation to identify the critical condition wether the stones were excluded. Regimes about the exclusion of stone in bypass pipe were divided into three types according to particle Reynolds number ($Re_p$) and dimensionless critical shear force (${\tau}_c{^*}$) - exclusion section, probabilistic exclusion section, no exclusion section. Results from this study would be useful and essential information for bypass pipe design in transveral structures.

• Korean Journal of Environment and Ecology
• /
• v.26 no.4
• /
• pp.537-549
• /
• 2012

The purpose of this study was to provide data for the basic research to found the effective conservation and management plan for the Hamyangsangrim designated as Natural Monument No. 154 and surround areas by analyzing the ecological characteristics such as landuse and actual vegetation, plant community structure, soil chemical property and also to identify the tendency of the ecosystem changes through comparison with past studies. According to analysis the results, the landuse and actual vegetation of survey site was classified as 8 types which were forest, artificial greenspace, plaza and open-space, bare ground and the pavement, water bodies, facilities, agricultural land and etc.. It was also categorized as 38 types according to detailed characteristic. 15 kinds of forest vegetation community types comprising silva were classified among them. The changes of actual vegetation showed little variation that the Quercus serrata-Carpinus tschonoskii forest was the most widely distributed in 2003(forest area ratio is 48.3%) and 2010(forest area ratio is 48.1%), whereas, the Quercus serrata forest declined a more dramatic from 11.6% to 23.2%. The Quercus serrata-Carpinus tschonoskii forest increased sharply(11.6% ${\rightarrow}$ 23.2%) and also the Quercus serrata-Zelkova serrata forest increased steadily(2.2% ${\rightarrow}$ 7.9%). The agricultural land around forest was transformed into artificial green zone. Moreover, water bodies, bare ground and the pavement of areas have increased. In addition, the urbanized area has decreased because the damaged areas inside forest have been restored to the woodlands. According to the result of typical 6 types vegetation communities change, the middle layer trees grew up to the canopy layer trees and was formed the canopy layer structure. The middle layer trees expanded their forces widely. Also new species appeared. And the shrub individuals also more dramatically increased due to the growth of shrubs. The force of Quercus serrata declined as well. However the force of Carpinus tschonoskii and Zelkova serrata expanded and increased in the forest. It must be the result of the ecological vegetation succession and environmentally soundly health recovery by influence of the projects of forest surrounding environment improvement and limitation of access to forest have managed and maintained since 2003. Those sorts of changes seems to be going to develop continuously. In the future Carpinus tschonoskii and Zelkova serrata will not be only codominant in the canopy layer but also Carpinus Tschonoskii, Zelkova serrata, Meliosma myriantha, Sapium japonicum. Styrax obassia and Acer pseudo-sieboldianum will be codominant in the middle layer. As a result, the forest's codominance species are going to be changed such like that.