• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.9
• /
• pp.1255-1266
• /
• 1998

Effects of a length-to-diameter ratio, L/D, on the three-dimensional flow and aerodynamic loss within an injection hole, which is normally oriented to the mainflow, have been investigated by using a straight five-hole probe. The length-to-diameter ratio of the injection hole is varied to be 0.5 and 2.0 for blowing ratios of 0.5, 1.0 and 2.0. Regardless of the blowing ratio, flows within the hole and at the jet exit are strongly affected by the length-to-diameter ratio. In the case of L/D=0.5, the inside flow is considerably influenced by the mainflow, and the exit flow variation is found to be the greatest. The aerodynamic loss in this case is usually attributed to jet -mainflow interactions. In the case of L/D=2.0, the flow separation and reattachment in the inlet region are completely separated from the complicated exit flow, and the aerodynamic-loss production is mainly due to the inlet flow separation.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.4
• /
• pp.327-334
• /
• 1994

The manifold designates a pipe system discharging or absorbing water through multiple holes installed along the finite length of the pipe. The proper design of the manifold requires the pre-analysis of the hydraulic characteristics such as system head and flow rate. head loss and hole discharges, etc. On the contrary to the general pipe systems. the head loss along the pipe is hardly quantified in an explicit way since it is complicately varied by the size and arrangement of the holes. In the present study, both energy and continuity equations are employed to analyze the hydraulic characteristics, constituting nonlinear simultaneous equations which are solved by Newton method. In addition, a hydraulic experiment utilizing the manifold system equipped with an automatically controlled valve is performed to reproduce model tide. The result shows that the manifold system can be effectively used in a tidal basin where water flow should be maintained uniformly over the basin width.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04b
• /
• pp.505-507
• /
• 2000

현재 백혈병 진단에서 사용중인 방법은 골수영상을 획득하고 이를 관찰하여 비정상의 백혈구의 형태, 백혈구 핵의 크기와 추출된 골수에서의 백혈구가 차지하는 비율을 이용하여 진단하고 있다. 비정상적인 모양을 띠고 있는 백혈구의 검출은 백혈병 진단에 있어 중요한 정보로 사용된다. 백혈구의 이상 형태중 다수의 구멍이 있는 백혈구는 검출하기 위해 골수영상에서 백혈구 영역을 추출하고 이에 대해 UNL transform을 이용하여 모양 특징을추출하였다. UNL Fourier transform은 원영상의 이동(translation), 회전(rotation), 확대/축소(scale)에 대해 불변인 성질을 지니므로 이를 이용해 백혈구의 모양 특징을 추출하고 유사도 검색을 통해 비정상의 백혈구를 검출하였다.

• The Korean Journal of Mycology
• /
• v.27 no.2 s.89
• /
• pp.107-111
• /
• 1999

Vinyl mulching was used on Oyster mushroom beds in an attempt to control bacterial diseases of Pleurotus ostreatus. Beds were covered with perforated, transparent vinyl sheets (0.03 mm thick, 180 cm wide); holes (10 cm diameter) were 10 cm apart. There were $25\;holes/m^2$. Vinyl mulching made management of the crop easier. Discrete mushroom flushes formed with high quality bunches of mushrooms formed through the holes; this made picking quicker and made more efficient use of labor. Total yield of mushrooms increased by 5.7% to $10.8\;kg/m^2$. Mushroom mycelium under vinyl remained healthy and white; whereas mycelium grown using conventional methods changed from white to yellow-brown during the cropping cycle. The mean weight of a mushroom bunch from vinyl mulched beds was 283 g (33 fruitbodies) compared to 117 g (15 fruitbodies) obtained using conventional growing methods.

• Korean Journal of Optics and Photonics
• /
• v.22 no.2
• /
• pp.96-101
• /
• 2011

Operational and thermal characteristics of a thin disk Yb:YAG crystal with a thickness of 0.8 mm were studied using as a pumping source a fiber-coupled 930 nm laser diode. The heat generated in the crystal was dissipated by placing both surfaces in contact with copper plates with central hole, and the dependence of the temperature change in the illuminated spot on hole size was investigated by measuring the spectral change of the lasing peaks. The slope efficiency and optical-to-optical efficiency with respect to the LD pump power were as high as 42.2% and 34.8%, respectively. The temperature at the illuminated spot increased with diode current and with increasing hole size of the copper plate. When the hole size considerably exceeded the crystal thickness, the temperature rise deviated from the linear increase at high pump power.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.671-680
• /
• 2007

The objective of this work is to reduce drag on a bluff body within a viscous flow by applying suction or injection of fluid along the surface of the body. In addition to minimizing drag, the optimal solution tends to reduce boundary layer separation and flow recirculation. When discretized by finite elements, the optimal control problem can be posed as a large-scale nonlinearly-constrained optimization problem. The constraints correspond to the discretized form of the Navier-Stokes equations. Unfortunately, solving such large-scale problems directly is essentially intractable. We developed several Sequential Quadratic Programming methods that are tailored to the structure of the control problem. Example problems of laminar flow around an infinite cylinder in two dimensions are solved to demonstrate the methodology. We use these optimal control techniques to study the influence of number of suction/injection holes and location of holes on the resulting optimized flow. We compare the proposed SQP methods against one another, as well as against available methods from the literature, from the point of view of efficiency and robustness. The most efficient of the proposed methods is two orders of magnitude faster than existing methods.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.246-253
• /
• 2003

The initiation and growth of short fatigue cracks in the simulated aircraft structure with a series of rivet holes was detected by acoustic emission (AE). The location and the size of short tracks were determined by AE source location techniques and the measurement with traveling microscope. AE events increased intermittently with the initiation and growth of short cracks to form a stepwise increment curve of cumulative AE events. For the precise determination of AE source locations, a region-of-interest (ROI) was set around the rivet holes based on the plastic zone size in fracture mechanics. Since the signal-to-noise ratio (SNR) was very low at this early stage of fatigue cracks, the accuracy of source location was also enhanced by the wavelet transform do-noising. In practice, the majority of AE signals detected within the ROI appeared to be noise from various origins. The results showed that the effort of structural geometry and SNR should be closely taken into consideration for the accurate evaluation of fatigue damage in the structure.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.4
• /
• pp.275-282
• /
• 2017

In this paper, using a pattern transformation triggered by deformation, we propose a porous structure that exhibits the characteristic of negative Poisson's ratio in both tension and compression. Due to the lack of torque for rotational motion of ligaments, the existing porous structure of circular holes shows positive Poisson's ratio under tension loading. Also, the porous structure of elliptic holes has a drawback of low durability due to stress concentration. Thus, we design curved ligaments to increase the rotational torque under tension and to alleviate the stress concentration such that strain energy is uniformly distributed in the whole structure. The developed structure possesses better stiffness and durability than the existing structures. It also exhibits the negative Poisson ratio in both compression and tension of 10% nominal strain. Through nonlinear finite element analysis, the performance of developed structure is compared with the existing structure of elliptic holes. The developed structure turns out to be significantly improved in terms of stiffness and durability.

• Microbiology and Biotechnology Letters
• /
• v.44 no.4
• /
• pp.479-487
• /
• 2016

Recently, various marine algae have been considered as a natural resource for anti-inflammation. In this research, we investigated the anti-inflammatory activity of Ulva pertusa Kjellman ethanol extract (UPKEE). This study showed that UPKEE inhibited the secretion of cytokines including IL-6, $TNF-{\alpha}$, and $IL-1{\beta}$, and reduced the expression of $NF-{\kappa}B$ and mitogen-activated protein kinases (MAPKs) as well as iNOS and COX-2. In the formation of mouse ear edema test, three doses (10, 50, 250 mg/kg body weight) of UPKEE showed inhibitory activity after inducing inflammation using croton oil. In conclusion, we found that UPKEE showed an inhibitory effect on $NF-{\kappa}B$ and MAPKs, and reduced the secretion of inflammatory cytokines. This result suggests that UPKEE can be used as a natural anti-inflammatory resource in food industry.

• Journal of ILASS-Korea
• /
• v.1 no.1
• /
• pp.55-62
• /
• 1996

In a fuel injection engine, atomization of liquid fuel and mixture formation process has influenced(or affected) directly on the engine performance and pollutant emission. In this study, the characteristics of fuel spray and the behaviors of secondary atomization developed at the downstream of the valves were investigated using an image processing method. Solid and perforated valves are chosen in order to evaluate the valve performance in terns of air flow rate, valve opening angle and valve shape. Experimental results clearly indicate that the spray atomization quality can be improved by increasing the perforated rat io and the blockage rat io in the perforated valve, the characteristics of spray atomization is improved by using the perforated valve with high perforated rat io and blockage ratio.