• The Journal of Internal Korean Medicine
• /
• v.31 no.3
• /
• pp.488-499
• /
• 2010

Objective : This study was designed to investigate the correlation between Qi movement stagnation condition, stress level and xerostomia in halitosis patients. Methods : Ninety-nine halitosis patients visiting the Halitosis Clinic in the hospital of Oriental medicine, Kyung Hee University from January, 2010 to May, 2010 were recruited. The subjects were assessed on their stress levels(based on the Stress Response Inventory), xerostomia symptoms(based on the 8-item Visual Analogue Scale xerostomia questionnaire), and Qi movement stagnation(氣鬱) condition(one of the subcategories in the Qi, blood and water pattern identification(氣血水辨證)). Salivary functions were evaluated using the unstimulated whole salivary flow rate measurements. Results : Compared to the non-Qi movement stagnation group(Qi movement stagnation pattern identification score < 30), the confirmed Qi movement stagnation group(Qi movement stagnation pattern identification score $\geqq$ 30) showed higher levels of xerostomia and stress. In the regression analysis, the Qi movement stagnation condition and stress levels showed a significant correlation. Furthermore, the Qi movement stagnation condition and stress levels each displayed significant correlations with xerostomia. Conclusions : The results of this study suggest that stress and Qi movement stagnation condition contribute to xerostomia symptoms in halitosis patients. Considering the correlation found between the Qi movement stagnation and stress, this study suggests a novel methodology in treating xerostomia, halitosis, and other stress-related disorders through the Qi movement stagnation-related approach.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.2
• /
• pp.311-322
• /
• 2010

Objectives : Since the program about sodium lauryl sulfate that might cause oral dryness and taste change including oral tissue allergy was on the air, the ingredients of D.I.Y dentifrices without sodium lauryl sulfate have been sold in online shopping mall and ordinary people can make the dentifrices easily. But there have not been any reports about the effect of dental plaque removal and preference about D.I.Y dentifrices. Therefore, this study was designed as a pilot study which aimed to investigate the effect of dental plaque removal and prefernece about D.I.Y dentifrices. Methods : 6 subjects were collected to test the effect of dental plaque removal with D.I.Y dentifrices with written consent. They didn't brushed the teeth during 12 hours until the check-up time on the next day. The O'leary index was calculated in baseline, 1 minute, 2 minute, 3 minute after brusing with D.I.Y dentifrices and market dentifrices. The preference about D.I.Y dentifrices through self-administered questionnaire was surveyed in 51 subjects after using D.I.Y dentifrices. Results : 1. The market dentifrices could remove larger amount of dental plaque than D.I.Y dentifrices, but, it wasn't significant. 2. In feeling refreshment, the market dentifrices had more positive answers significantly. 3. In feeling taste change, the market dentifries had more duration of taste change significantly. 4. In feeling oral dryness, the market dentifrices had more duration of oral dryness after toothbrushing. but, it wasn't significant. 5. As a result about reviewing the dental journals about ingredients of D.I.Y dentirices, green tea, sodium carbonate, bamboo salt, propolis had each evidence. But, We could not find out the evidences of calculus adhesion by corn starch, preservative by napri, disinfectant of peppermint. Conclusions : Although we cannot find the difference of the effect of dental plaque removal between D.I.Y dentifrices and market dentifrices, and D.I.Y dentifrices have the merits of decrease of oral dryness and taste change, it was suggested to have another test about stability and safety of D.I.Y dentifrices for safety of the user of D.I.Y dentifrices.

• Korean Journal of Head & Neck Oncology
• /
• v.26 no.2
• /
• pp.171-177
• /
• 2010

연구목적 : 비인두암 환자들을 대상으로 방사선치료 시 삼차원입체조형치료기법과 용적세기조절회전치료기법을 비교하고 이하선을 포함한 정상조직 보호에 있어 그 차이점을 알아 보고자 본 연구를 시행하였다. 대상 및 방법 : 비인두암 환자 5명을 대상으로 치료계획용 CT(computed tomography)를 시행 후 삼차원입체조형방사선치료계획 과 용적세기조절회전치료계획을 시행하였다. 이를 바탕으로 얻은 선량분포, conformity index(CI) 그리고 선량체적 히스토그램을 통해 손상위험장기(organ at risk)와 계획용표적체적(planning target volume)을 비교 분석하였다. 결 과 : 분석결과 이하선에 조사되는 평균선량이 용적세기조절회전치료계획에서는 43.9%로 삼차원입체조형치료계획에서의 89.4% 보다 유의하게(p=0.043) 감소하였다. 계획용표적체적 conformity index의 경우 용적세기조절회전치료계획 (CI=1.06)에서 삼차원입체조형치료계획(CI=2.55) 보다 유의하게(p=0.043) 향상된 결과를 보였다. 결 론 : 비인두암 환자에서 용적세기조절회전 치료계획 시 삼차원입체조형치료계획 보다 유의하게 이하선에 평균선량이 줄었고 계획용 표적체적에 대한 conformity도 유의하게 향상되는 결과를 보였다. 본 연구가 적은 수의 환자를 대상으로 하였으나 용적세기조절회전치료기법을 시행 시 구강건조증의 발생을 줄일 수 있을 것으로 기대된다. 향후 더 많은 환자군을 대상으로 한 임상연구가 필요할 것으로 사료된다.

• Journal of Hospice and Palliative Care
• /
• v.11 no.2
• /
• pp.99-105
• /
• 2008

Purpose: In terminally ill cancer patients, accurate prediction of survival is necessary for clinical and ethical reasons, especially in helping to avoid harm, discomfort and inappropriate therapies and in planning specific care strategies. The aim of the study was to investigate prognostic factor of dying patients. Methods: We enrolled the terminal cancer patients from Kangnam St. Mary's Hospital from 2004 until their death. We observed symptoms shown in dying patients and assess 17 common symptoms shown in terminally ill cancer patients, performance status, pain and analgesic use. Results: Average period from hospitalization to death was 11.7 days. The most important prognostic factor is performance status (KPS), average KPS at enrollment is 48% and at last 48 hours is 25%. Physical symptoms that have significant prognostic importance are poor oral intake, weakness, constipation, decreased Karnofsky performance status, bed sore, edema, jaundice, dry mouth, dyspnea. Dying patients showed markedly decreased systolic blood pressure, cyanosis, drowsiness, abnormal respiration, death rattle frequently at 48 hours before death. Conclusion: If we assess the symptoms more carefully, we can predict the more accurate prognosis. The communication about the prognostic information will influence the personal therapeutic decision and specific care planning.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.2
• /
• pp.370-378
• /
• 2000

The composite restorative resins have their insufficient resistance to wear. The subsurface degradation within the restoration is considered to be associated with wear. The aim of this study was to evaluate the resistance to degradation of six commercial composite resins in an alkaline solution. The brands studied were Clearfil APX(Kuraray), Heliomolar(Vivadent), Surefil(Dentsply), TPH(Dentsply), Tetric Ceram(Vivadent), and Z100(3M). Preweighed discs of each brand were exposed 0.1N NaOH solution at $60^{\circ}C$. After 14 days they were removed, neutralized with HCL, washed with water and dried to constant mass at $60^{\circ}C$. Resistance to degradation was evaluated on the basis of the following parameters: (a) mass loss(%) - determined from pre-and post-exposure specimen weights; (b) Si loss (ppm)-obtained from ICP-AE analysis of solution exposed to specimens; and (c) degradation depth$({\mu}m)$ - measured microscopically (SEM) from polished circular sections of exposed specimens. The results were as follows: 1. The mass loss was in descending order by Z100, TC H, S, CL, TPH and in the range of $0.45\sim3.64%$ 2. The degradation layer depth was in descending order by H, Z100, S, TC, TPH, CL and in the range of $10.85\sim73.38{\mu}m$ 3. For the Si concentration, Z100 was the highest of all 4. The highly significant correlation(r=0.81, p<0.05) was observed between mass loss and degradation depth. 5. Under scanning electronmicroscopy, the degradation of connection between resin matrix and fillers was observed 2 weeks after soaking in NaOH solution.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.157-169
• /
• 2009

The aim of this study was to evaluate effect of implant abutment screw coating treatment on joint stability, investigating mechanical properties of these. For this study used $ExFeel^{(R)}$ external hexed implant system and $15mm{\times}1mm$ discs. Experimental group was $1{\mu}m$ TiN, TiCN, TiC coated abutment screws and discs. To know mechanical property, i evaluated adhesion strength, surface hardness, using disc, corrosion test using screw. The results were as follows : rotation angle of coated screws increased than that of non-coated screw because of lower friction coefficient, especially TiC coated screw group had the largest value, but removal torque decreased in all coated screws (p<0.05). Torque loss before and after fatigue test was the smallest in TiC-coated screws, and the largest in non-coated screws (p<0.05), and there was no statistically significant difference between dry condition and wet condition of screws because of higher surface hardness and lower friction coefficient. From the above results, TiN, TiCN, TiC coating group had high abrasion resistance, especially TiC coated group which had low torque-consuming, high rotation angle as low friction coefficient will be considered to influence on implant abutment screw joint stability positively.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.2
• /
• pp.183-190
• /
• 2009

The aim of this study is to find the condition of forming the favorable nanotubes by anodizing with NaF and $H_3PO_4$. Machined Ti discs were used for anode, and Platinum net was used for cathode. For electrolyte, $H_3PO_4$ and NaF solution were mixed. We controlled voltage, electrolyte concentration, anodizing time and formed nanotubes on Ti discs. After that, these were washed with distilled water for 24 hours and dried in the $40^{\circ}C$ oven for 24 hours. The surface structure of specimens were analyzed. The results were as follows : At 0.5 wt % NaF, according as increasing voltage and anodizing time, early state of nucleating pores were generated. At 1.0 wt % NaF, 20 V, 20 & 25 min, well-formed nanotubes were observed. At 1.0 wt % NaF, 30 V, structure of nanotube became bigger and interconnected. At 2.0 wt % NaF, no nanotubes were formed and it was unrelated with voltage and time. At 1.0 wt % NaF, 20 V, 20 - 25 min, well-ordered nanotubes were generated on Ti discs. For the formation of favorable nanotubes, it is considered that proper parameters such as electrolyte concentration, voltage, anodizing time are necessary according to the kind of electrolytes.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.6
• /
• pp.1327-1334
• /
• 2015

Cancer pain is a very important factor in cancer patients refractory to drop the quality of life of cancer patients. The worldwide trend is an integrated effort by both the western medicine and korean traditional medicine of treatment increases to reduce cancer pain. There are many studies related to cancer pain through an integrated medicine approach. Many study was reported that acupuncture treatment is effective for fatigue, xerostomia, insomnia, anxiety and quality of life. However, despite the practical clinical effects and various case reports of acupuncture, many still disagree about the significance of an integrated treatment of pain reduction with acupuncture. Therefore, we has identified that reduce effect of comprehensive and integrative treatment using acupuncture for cancer pain through publication review. And we evaluated effect of comprehensive and integrative treatment using acupuncture through summary of values in each publication.

• Journal of Periodontal and Implant Science
• /
• v.35 no.4
• /
• pp.949-959
• /
• 2005

이 연구는 임플란트를 식립하기를 원하는 전신건강상태가 양호하며 구강위생상태가 좋은 14명 환자(남자:8명, 여자:6명, 평균나이 : 44세)의 20개의 발치와 내에 흡수성 차폐막(BioMesh. Sam Yang Corporation, Korea)과 함께 탈회냉동 건조동종 골(dem-ineralized freezedried bone allografts, $250-500{\mu}m$. Pacific Coast Tissue Bank, U.S.A.)과 이종골(Bovine-Bone, Bio-Oss 0.25-1.0 mm, Geistlich, Biomaterials and Osteohealth, Switzerland)을 1:1(부피)로 혼합하여 이식한 후 그 치유양상을 관찰하고자 조직학적 및 면역조직화학적으로 평가하였다. 이직재가 탈락되는 것을 방지하기 위하여 발치한 후 1개윌이 경과된 후에 이식재와 차폐막을 위치시켰다. 표본제작을 위하여 이식술을 시행한 지 약 6개윌 후에 임플란트를 식립하기 직전 식립부위에서 trephine bur로 골을 채취하였는데, 20증례 중 7증례에서 임플란트를 식립하기 전에 차폐막이 노출되었다. 차폐막이 노출되지 않은 것을 대조군으로, 노출된 것을 실험군으로 설정하였다. 조직학적인 관찰을 위하여 통상적인 방법에 따라 탈회 표본을 제작하였고, alkaline phosphotase(ALP)틀 이용하여 면역조직화학적 염색을 시행한 후 골 형성 상태를 평가하여 다음과 같은 결과를 얻었다. 본 연구에서는 발치와내에서 골유도재생술 후 나타나는 치유 형태를 5가지 형태로 분류할 수 있었다. Type I, II와 III는 새로운 골 형성을 나타내지 않았고, 면역조직화학적 검사 시 ALP 음성 소견을 나타내었다. Type V는 새로운 골 형성과 ALP 양성 소견을 나타내었으나 염증, 괴사, 결합조직의 증식 등은 없었다. Type IV와 Type V의 차이는 결합조직의 증식여부로 구분되었다. 막이 노출되지않은 증례들 중 7 증례에서는 Type V의 치유 형태를, 2증례에서는 Type IV의 치유 형태를 나타내었다. 막이 노출되었던 증례에서는 Type I, II, III의 다양한 치유 형태를 나타내었다. 본 연구결과, 발치와 내에 골유도재생술을 시행한 후 차폐막의 노출 여부가 신생골 형성에 중요한 영향을 미칠 것으로 사료되며, 본 연구에서 분류한 치유 형태가 향후 골유도재생술 후의 결과 분석에 활용될 수 있을 것으로 사료된다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.4
• /
• pp.339-347
• /
• 2012

In previous studies, methods for enhancing cellular response on the Hydroxyapatite coated implant surface were described. In this study, the changes of surface characteristics such as surface roughness, contact angle, surface energy and surface morphology were observed when Hydroxyapatite coated Ti discs were immersed in NaCl solution for various time. Hydroxyapatite coated Ti discs were immersed in 0.9% NaCl solution for 7, 14 and 21 days at $37^{\circ}C$. The control group comprises dry identical discs not immersed in a solution. (n=3) All discs were dried in air completely and the surface roughness was measured using confocal laser scanning microscopy(CLSM). Static contact angle was recorded by video contact angle analyzer after dropping distilled water on the surface. The surface energy was calculated from contact angles of the three liquids. Surface was observed using a field emission-scanning electron microscope(FE-SEM). As a result, the surface roughness of immersed Hydroxyapatite coated Ti discs increased significantly and the contact angle decreased comparing with control group discs. The surface energy of immersed discs increased except for discs immersed for 14 days.