• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.17-26
• /
• 2010

This study presents a decision making process for installation of wind barrier which is used to reduce the wind acting on running vehicle on expressway. At the first stage of this study, the lateral deviations of running vehicles under side winds were computed from the commercial softwares, CarSim and TruckSim, and then the critical wind speeds for car accident were evaluated from predefined risk index. To determine whether it is needed to install wind barrier or not, cost and benefit from wind barrier are calculated during lifetime. In obtaining car accidental risk, probabilistic distribution of wind speed, daily traffic volume, mixture ratio in the volume, and duration time for wind speed range are considered. It is recommended to install wind barrier if benefit from the barrier installation exceed construction cost. In the numerical examples, case studies were shown for risk and benefit calculation and main risky regions on Korean highway were all evaluated to identify the number of installation sites.

• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.149-159
• /
• 2012

The evaluation of public transit service quality is more complicated than evaluating other aspects of transportation service. Although various measures of effectiveness [MOEs] for transit service have been studied and applied, a more comprehensive and accurate MOE is still required. In the past, either data from user surveys or the experience of bus agency administrators and/or engineers used to measure the quality of service. However, recently, with reliable and accurate real time data from BMS(Bus Management System) and BIS(Bus Information System), more reliable and accurate MOEs are available. This study develops a service evaluation model from users' perspectives, which is based on user' cost models that consider passenger access time, riding time, waiting time, and discomfort due to in-vehicle overcrowding, violation of traffic laws, and accident rate. For validating proposed model, data from the BMS and transit-fare cards (T-Money Card) for Seoul's No. 472 main bus line were used. Models developed in this study provided reliable results.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.29-40
• /
• 2010

Car simulation by TRANSIMS is able to rapidly analyze the broad area based on CA(Cellular Automata) theory, which is the great advantage compared to other existing programs. As the source code of TRANSIMS is open, it may be modified by incorporating the network and traffic characteristics. This study uses the traffic thematic map built in the Korean National Traffic DB(KTDB) center among input date used for building network data of TRANSIMS. However, because the traffic thematic map is not composed as the type required by TRANSIMS, it was corrected and complemented to build a network, and the traffic volume at arterial roads and the traffic volume at each direction of the intersection was calculated through simulation for the area of Suseong-Gu, Daegu Metro. This was compared to the actual traffic volume. As a result of the simulation, it shows error from 14% to 42% at intersection, and from 3% to 8% at arterial roads. This result is very satisfactory because the entire traffic volume of Daegu Metro was not considered, and the tendency of drivers avoiding path due to construction on certain section, the status of road surface and chronic congestion was not reflected.

• Korean Security Journal
• /
• no.25
• /
• pp.147-164
• /
• 2010

A variety of work zone including road single-sharing construction add surrounding disorder and increase inconvenience of vehicles and pedestrians and furthermore danger of traffic accidents, which sometimes result in human life damages. Traffic delay due to vehicles and users generating in the course of using large-scale multiplex facilities bring about a great economic loss. Now, a lot of regulations and laws related to traffic safety system on construction sites etc. are established, but can not display efficacy desirably. It brings about continuous economic loss due to human life accidents and delay. For the purpose of solving the problems, it is necessary to import systems such as traffic inducement Security (Japan) and traffic controller (CANADA, USA) This article suggest how improve civil safety and reduce Social cost. therefore This thesis aims at analyzing advanced cases of foreign countries, looking into Korean status, and presenting importing ways of traffic inducement Security appropriate to Korea. It is reasonable to grant grade1, grade2, and technical experts to traffic inducement Security who pass regulated educations and examinations. In addition, by reversing regulations and laws, it is necessary only those who have the licenses of traffic induction guarder etc. can establish construction sites and disordered places on roads. Theory educations for education time must include basic educations and expert educations. Basic educations must include understanding regulations and laws and understanding affairs. Expert educations must include traffic control, safety educations, understanding of traffic accidents, operation of traffic control facilities, and traffic accident settlements. Traffic affairs educations must include traffic induction affairs in sites (hand signals, safety material establishment, traffic accident settlements, and urgent treatments).

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.31-42
• /
• 2003

Prepaid plastic card issued by Korea Highway Company had a lot of problems in end-user usage and management. HipassPLUS Card, which is a smart card used for a prepaid electronic payment, overcomes the problems of Prepaid Plastic card. HipassPLUS Card is also designed be compatible to other cards such as public transportation card. Thus, for the safety of using the card in such environment, the functionality and the security of HipassPLUS card should be faultless. This paper developed a test module including the test method, the test checklist, and the test procedure to examine the functionality and security of the payment mechanism of HipassPLUS card. The test module contains the method and the procedure to test the standard items according to the test checklist of HipassPLUS card. The test items and the test checklist of HirassPLUS card was selected under the provision of the specification of Korea Highway Company and ISO standard. The results of evaluation on HipassPLUS card using the proposed test module indicates that 4he HipassPLUS card satisfied the criteria under the characteristics of the functionality, security, and compatibility.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.11-23
• /
• 2011

The objective of this paper is to develop a daily pattern clustering algorithm using historical traffic data that can reliably detect under various traffic flow conditions in urban streets. The developed algorithm in this paper is categorized into two major parts, that is to say a macroscopic and a microscopic points of view. First of all, a macroscopic analysis process deduces a daily peak/non-peak hour and emphasis analysis time zones based on the speed time-series. A microscopic analysis process clusters a daily pattern compared with a similarity between individuals or between individual and group. The name of the developed algorithm in microscopic analysis process is called "Two-step speed clustering (TSC) algorithm". TSC algorithm improves the accuracy of a daily pattern clustering based on the time-series speed variation data. The experiments of the algorithm have been conducted with point detector data, installed at a Ansan city, and verified through comparison with a clustering techniques using SPSS. Our efforts in this study are expected to contribute to developing pattern-based information processing, operations management of daily recurrent congestion, improvement of daily signal optimization based on TOD plans.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.77-89
• /
• 2008

The bikes are conflicted with the cars and the pedestrian at the intersection and the road with the bike crossing. To establish the bike signal at this section is one method to solve this conflict. According to the survey for the bike road status and the biker's characters which are crossing the road at the intersection, the bike crossing are established with beside the pedestrian crossing and most of the bikers are crossing the street by the pedestrian signal. Also, the bike queue which is waiting the signal change at the stop line was cleared before the closing the pedestrian signal. Considering the result of this survey, TOUCAN crossing signal type in England for bike signal at the place where the bike crossing are established with beside the pedestrian crossing, in which bike rider and pedestrian can cross by the pedestrian signal operation, is suggested. However, at the place where the bike crossing is apart from the pedestrian crossing, the bike signal which is connected to the vehicle signal is suggested. All these types of bike signals can be accepted for the present bike crossing equipments and the biker's characters and be adapted to the police standard traffic signal controller by adjusting the signal time only without any function change.

• Journal of Korean Society for Geospatial Information Science
• /
• v.5 no.2 s.10
• /
• pp.131-144
• /
• 1997

Traffic jam densified day by day is phenomenon to occur lack of the road capacity in comparison with traffic density, but lack of the road cannot be concluded by main cause of traffic ism. Because the central function of a city would be concentrated upon the downtown and traffic demand would not be evenly distributed by the classification of an hour. Therefore, this study based on the fact that each driver will select the route generating traffic delay very low when path choice from origin to destination in travel plan estimating the quality of passage could be maintained the speed he want will approach to a characteristic grasp of a road, traffic, driver changing every moment by traffic-demand of road increased as a geometrical series with analysis a classification of a street, a intersection along the path on traffic density and highway capacity analysis the path using GIS techniques about complex street network, also will get the path of actual optimum for traffic delay trend creating under various condition the classification per a hour, a day of week and an incident through network such as analysis for traffic generation zone adjacent about street, intersection, afterward will expect the result increasing efficiency of the road-use through a good distribution of traffic by optimum-path choice, accordingly will prepare the scientific, objective, appropriate basis to decide the reasonable time of a road-widen and expansion through section analysis along a rate of traffic volume vs. road capacity.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.5
• /
• pp.70-81
• /
• 2020

Point-by-point data, which is abundantly collected by vehicles with embedded GPS (Global Positioning System), generate useful information. These data facilitate decisions by transportation jurisdictions, and private vendors can monitor and investigate micro-scale driver behavior, traffic flow, and roadway movements. The information is applied to develop app-based route guidance and business models. Of these, speed data play a vital role in developing key parameters and applying agent-based information and services. Nevertheless, link speed values require different levels of physical storage and fidelity, depending on both collecting and reporting intervals. Given these circumstances, this study aimed to establish an appropriate collection interval to efficiently utilize Space Mean Speed information by vehicles with embedded GPS. We conducted a comparison of Probe-vehicle data and Image-based vehicle data to understand PE(Percentage Error). According to the study results, the PE of the Probe-vehicle data showed a 95% confidence level within an 8-second interval, which was chosen as the appropriate collection interval for Probe-vehicle data. It is our hope that the developed guidelines facilitate C-ITS, and autonomous driving service providers will use more reliable Space Mean Speed data to develop better related C-ITS and autonomous driving services.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.361-368
• /
• 2010

It is general that mostly congested sections of national backbone networks have been improved based on the national network expansion plan. However, in case of intermodal terminals which are origins of logistics, it is still so congested that travel time between origin and destination is long. Therefore, intermodal transportation systems plan of major intermodal terminals for the intermodal connector networks between intermodal terminal and national backbone network or intermodal terminal was established. With the limitation of priority methodology applying to intermodal connector facility under existing methodology, this study suggests an improved priority methodology. This study includes characteristics of terminal on the hierarchical structure and assessment list, but it does not concentrate on the specific terminal type through survey. To avoid a certain concentration, budget constraint for each terminal type was considered ahead of priority. Finally priority methodology was developed with two-step assessment under consideration that specific terminal is not involved in intermodal connector facility project. As a result of calculating weights by survey, effects such as d/c and accessibility fluctuations index through project implementation gain high weight, and degree of region underdevelopment gets next. Although the methodology in this study could not yields the priority by assessment list, it will be useful for setting the direction on policy related to intermodal connector facility projects.