• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.119-129
• /
• 2014

This study aims to evaluate the accident reduction effects of 'Section Speed Enforcement System' (SSES) operation in freeways. In pursuing the above, this study collects the accident data for 5 years (2 years before operation and 3 years after operation) at all 9 sections where SSESs are operated, and evaluates annually the effects before and after operation using the comparison group method (C.G. Method). The measures of effectiveness are total accidents (TAs), fatal and serious accidents (FSAs), total injuries (TIs) and fatal and serious injuries (FSIs). The main results are as follows. First, TAs and TIs are reduced to 41.7 and 17.1%, respectively. Second, FSAs and FSIs are reduced to 41.7 and 32.2%, respectively. Therefore, SSES has more effectiveness at fatal and serious accident. Third, the accident reduction effect has been increasing, and particularly the effect of 'after three years' is evaluated to be notable.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.6
• /
• pp.1851-1861
• /
• 2014

This study aims to calculate reliable sectional travel speeds with the consideration of the characteristics of the probe data collected in the interrupted traffic flow. First, in order to analysis the characteristics of the probe data, we looked into the distribution of the sectional travel times of each probe vehicle and compared the difference in the sectional travel speeds of each probe vehicle collected by DSRC. As a result, it is shown that outliers should be removed for the distribution of the sectional travel times. However, The comparison results show that the sectional travel speeds from the DSRC probe vehicles are not significantly different. Finally, based on the distribution characteristics of the sectional travel speeds of each probe vehicle and the representative values counted during a collection period, we drew the optimal outlier removal procedure and evaluated the estimation errors. The evaluation results showed that the DSRC sectional travel speeds were found to be similar to the observed values from actually running vehicles. On the contrary, in the case of the sectional travel speeds of intra-city bus, it was analyzed that they were less accurate than the DSRC sectional travel speeds. In the future, it will be necessary to improve BIS process and make use of the travel information on intra-city buses collected in real time to find various ways of applying it as traffic information.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.129-140
• /
• 2004

In this paper, we conduct the research about optimal aggregation interval of travel time data on interrupted traffic flow and verify the reliability of AVI collected data by using car plate matching method in RTMS for systematic collection and analysis of link travel time data on interrupted traffic flow rural arterial. We perform Kolmosorov-Smirnov test on AVT collected sample data and on entire population data, and conclude that the sample data does not represent pure random sampling and hence includes sample collection error. We suggest that additional review is necessary to investigate the effectiveness of AVI collected sample data as link representative data. We also develop statistical model by applying two estimation techniques namely point estimation and interval estimation for calculating optimal aggregation interval. We have implemented our model and determine that point estimate is preferable over interval estimate for exactly selecting and deciding optimal aggregation interval. Our final conclusion is that 5-minute aggregation interval is optimal to estimate travel time in RTMS, as is currently being used our investigation is based on AVI data collected from Yang-ji to Yong-in $42^{nd}$ National road.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.2
• /
• pp.63-73
• /
• 2016

On January 16 to May 31, 2012, Korea Expressway Corporation was carried out an pilot overweight enforcement using high-speed weigh-in-motion at Gyeongbu expressway 195.0k (Gimcheon) and Jungbunaeryuk expressway 119.5k (Seonsan). In this study, it is attempted to analyze the practical effect of high-speed weigh-in-motion by comparing the average total weight and traffic volume of eight weeks before and after the these overweight enforcement, respectively. The main results are as follows: First, the result of analysis of the change in average total weight and traffic volume, it was found that it did not differ after as in previous traffic volume, and the total weight is reduced. This means that the total weight is not reduced by decreasing freight traffic, but by decreasing the total weight. Therefore, it can be seen that there is an effect of pilot overweight enforcement using high-speed weigh-in-motion. Second, the average total weight and total weekly traffic volume decreased rapidly starting from the start of the overweight enforcement, but there was showing a tendency to increase gradually again.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.1
• /
• pp.57-64
• /
• 2017

This study was reviewed the noise reduction effects with installation of 'point to point speed camera' for controlling the speed of the car. The multiple regression analysis was performed to know how the relationship between the noise level and these parameters, such as measured traffic volume and rate of heavy vehicle and weighted average speed was changed with and without the 'point to point speed camera'. In the analysis results shows that the less traffic volume, the more noise reduction effect has been increased and the more traffic volume, the more noise reduction effect has been reduced. And noise reduction effects by the 'point to point speed camera' was different from each measured point. The cause of the difference was determined that inadequate 'point to point speed camera' position to see the effect of noise reduction. It is determined to require a more study to improve the noise reduction effects of the 'point to point speed camera' such as the camera position adjustment.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.68-77
• /
• 2013

This study suggested experimental study results of congestion detection method for intruding vehicle enforcement system. This congestion detection method is developed to determine optimal operation criteria of intruding vehicle enforcement system as detecting traffic congestion. In ITS sector, traffic management systems generally have used a sectional travel speed for congestion detection. However, image sensors have high error rate of congestion detection because of speed error. This study suggested comprehensive congestion detection criteria based on speed and occupancy rate using field studies. As field study results, the proposed intruding vehicle enforcement system using image sensor is capable of accurately detecting the traffic congestion using sectional speed of 20km/h and occupancy rate of 60% as congestion detection criteria.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.93-102
• /
• 2012

The frequency and severity of traffic accidents related to signalized intersections in urban areas have been more serious than those in both arterial segments and crosswalks. Especially, traffic accidents involved with injuries and fatalities have caused by traffic signal violations within intersections. Therefore, many countries including Korea have installed the red light enforcement camera (RLE) to reduce traffic accidents associated with the traffic signal violation. Meanwhile, many methodologies have been studied in terms of safety impacts estimation of red light enforcement, which, however, cannot be easy to conduct. In this study, safety impacts was estimated for intersections of Chicago downtown area using SPF models and EB approach. As a result, for all crash types and target traffic accident types such as "angle", "rear end", "sideswipe in the same and other directions", "turn", and "head on", fatal crashes were reduced by 26% and 38%. However, RLE may increase property-demage-only-crashes by 3.23% and 1.16%, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.3
• /
• pp.42-51
• /
• 2009

Korean government is managing a system that appoints various type of cars into lanes based on the number of lanes. The institution has been abolished and enacted time and again. This paper analyzes ten sections of express way to clarify the efficiencies of the system. The result shows that violation rate and the number of accident have a positive correlation. This paper suggests regulation of violating cars and controlment by perceiving car registration number for efficient operation of the institution.

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.235-243
• /
• 2020

Busan Port has a major function as the sixth largest port among the world container cargo standards and the second largest port among the world transshipment cargo standards. However, because of the lack of policy reflection on the port facility and carriers, overload control is a serious problem in freight transportation of transshipment cargo in Busan New Port and the port hinterland. In this regard, we reviewed the actual conditions of drivers, carriers, logistics managers, identified the problems, and suggest improvement plans.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10b
• /
• pp.415-417
• /
• 2001

본 논문에서는 주차 단속의 자동화를 위해 입력된 차량 영상으로부터 번호판 영역의 복합 색상 정보와 명암 벡터를 이용하여 번호판 영역을 추출하는 알고리즘을 제안한다. 일반적으로 명암도 영상에서는 번호판 영역의 숫자나 문자와 배경간의 명암도 변화는 뚜렷하게 나타나고, 다른 영역에 비하여 명암벡터의 밀집도가 높다는 특징을 가지고 있다. 이러한 특징을 이용하여, 번호판 영상의 하측 라인부터 명암 벡터의 부호 변화가 임계치 이상으로 나타나고, 자가용 또는 영업용 번호판 색상이 일정 수준으로 검출되는 구간을 번호판 영역으로 검출하고 이를 기준으로 대략 박스를 설정한다. 정교한 번호판 영역은 수직 소벨 에지 영상의 프로젝션으로 추출한다. 제안한 알고리즘을 평가하기 위하여, 다양한 시간과 장소에서 촬영되고 차량 주변의 복잡한 배경이 충분히 포함된 총 100장의 주차 단속 영상을 사용하였다. 실험 결과, 명암벡터와 색상정보를 함께 사용한 제안한 방법 이 명암벡터만을 사용한 방법에 비해 약 10% 향상된 97%의 번호판 추출률을 보였으며, 차량 종류의 자동 구분도 가능하였다.