• KSBB Journal
• /
• v.21 no.6 s.101
• /
• pp.418-421
• /
• 2006

Fatty acid methyl esters, also referred to as biodiesel, have been determined to have a great deal of potential as substitutes for petro-diesel. In order to enhance productivity in the biodiesel production process, feedstocks were previously recommended to be anhydrous, with a free fatty acid content of less than 0.5%. In this study, the effects of several catalysts, methanol molar ratio, catalyst amount, and reaction time on the reduction of free fatty acid level were studied with a simulated feedstock consisting of 20% oleic acid in rapeseed oil. Ferric sulfate was selected as the best catalyst. Increasing the catalyst amount and methanol molar ratio is very effective in decreasing the acid value of the simulated mixture. Our results may provide useful information with regard to the development of more economic and efficient free fatty acid removal system.

• Journal of Navigation and Port Research
• /
• v.42 no.4
• /
• pp.267-276
• /
• 2018

Leisure boat design requires a comprehensive approach combining emotion with engineering technology, and requires designers to constantly exchange information and cooperate with engineers during the design process. This study suggests a design process and design methods suitable for leisure boat design. The design process consists of five steps: understanding, exploring, analyzing, developing, and validating based on the designer's thinking process. Design methods were suggested to foster collaboration and communication between designers and engineers at each phase. This process and methods were applied to the hydrofoil-boat design and evaluated. The results suggest that the design methods promote cooperation and communication between the designer and the engineer and facilitate mutual understanding and trust.

• The KIPS Transactions:PartD
• /
• v.9D no.2
• /
• pp.313-322
• /
• 2002

Multimedia conference systems are classified into the tightly coupled conference and the loosely-coupled conference, the former is a peer-to-peer-conference or multi-point-conference based un the ITU-T H.323 standard, and the latter is the H.332 standard extended from the ITU-T H.323 standard. Loosely-coupled conference based on the H.332 standard is composed of small participants with the capacity of the send-receive mode and large participants with the capacity of the receive-only mode. In the H.332 conference, a subject and a media type of the multimedia conference is pre-announced for conquest of the difficulty of capability negotiation, and used SDP of IETF for that. Therefore, the H.332-conference can conquer a defect of the H.323 multimedia conference scalability. This paper analyzes H.332 standard for the loosely-coupled conference and describes an implementation of the H.332 multimedia conference systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.377-386
• /
• 2008

In this paper, a new handover management scheme has been proposed to reduce handover latency and to support fast handover without packet losses, so that it may be applicable to the wireless mobile Internet system such as IPv6-based WiBro system. To minimize the handover latency in processing of movement detection, we propose the handover management scheme which simplifies the handover message exchanging procedure between mobile subscriber station (MSS) and network by integrating layer 2 and layer 3 handovers efficiently based on the layer2 information. To reduce the processing delay from new care-of-address (NCoA) configuration during handover, we propose that NCoA is created, distributed and managed by new access control router (NACR). In addition, in order to minimize the packet transmission delay and eliminate the packet losses, the proposed scheme employs a crossover router (CR) which is upper network located over PACR and NACR and employs the packet buffering for MSS. The simulation study shows that the proposed scheme achieves loss-free packet delivery and low latency in the environment of narrow overlapped cell area or high velocity of the MSS, comparing the performance with the conventional schemes.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.12
• /
• pp.36-46
• /
• 1999

As the requirements of embedded systems increase, the design complexity of the system becomes higher. The formal design methodology is required which supports well-balanced specification for control and dataflow to design a complex system. In this paper, control modules and function modules are separately described with FSMs and dataflow graphs respectively, and integrated into a system specification via inter-model communications. In previous approaches, the system could not be verified until control modules and dataflow modules are combined at the final design stage. However our approach enables us to design each part as the proper model of computation at early stage, and to verify the compositions and to co-synthesize the system effectively in the same framework. Especially this paper focuses on the communication protocols between control and dataflow models. Preliminary experiments show practicality of the proposed technique.

• Journal of Life Science
• /
• v.14 no.5
• /
• pp.794-799
• /
• 2004

Cyclodextrin glucanotransferase (CGTase) produced by Bacillus subtilis NAl/pKBl was used for the production of cyclodextrin (CD). The enzyme was purified by ion exchange and gel filtration chromatography. The purified enzyme exhibited its maximum activity in the pH range of 6.0 to 7.0 and temperature range of 60 to $70^{\circ}C$. Immobilization of purified CGTase was carried out with various immobilization matrices. Amberlite IRA-900, a strong basic anion exchange resin, showed the highest immobilization ability (38 units per gram resin). Optimal pH and temperature for enzymatic reaction of the immobilized CGTase were pH 6.0 and 60t. The activity of immobilized CGTase maintained more than a month and could be reused for a month in a continuous enzyme reactor for the production of CD.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.9
• /
• pp.115-122
• /
• 2011

In this paper, we propose an efficient dynamic workload balancing strategy which improves the performance of high-performance computing system. The key idea of this dynamic workload balancing strategy is to minimize execution time of each job and to maximize the system throughput by effectively using system resource such as CPU, memory. Also, this strategy dynamically allocates job by considering demanded memory size of executing job and workload status of each node. If an overload node occurs due to allocated job, the proposed scheme migrates job, executing in overload nodes, to another free nodes and reduces the waiting time and execution time of job by balancing workload of each node. Through simulation, we show that the proposed dynamic workload balancing strategy based on CPU, memory improves the performance of high-performance computing system compared to previous strategies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.425-431
• /
• 2011

Thermal energy generated because of the friction between the disc and pad is transferred to both sides and causes thermal expansion of the material, which affects the contact pressure distribution. This phenomenon, which is called thermoelastic instability (TEI), is affected by the natural mode of a disc. TEI results in the formation of a hot spot and causes hot judder vibrations. In this study, three-dimensional analysis of the hot judder of a ventilated disc for automotives was performed by using the commercial finite element analysis program, SAMCEF. The intermediate processor based on a staggered approach was used to exchange the result data of the mechanical and thermal model. The hot spot was formed on the surface of the disc, and the number of hot spots was compared with the natural mode of the disc.

• The Journal of the Korea Contents Association
• /
• v.7 no.12
• /
• pp.245-253
• /
• 2007

In this paper, we propose an effective web service software platform for remote monitoring and control. We removed the servlet container for better web service performance so as to improve the gSOAP processing which is an essential element of web service implementation. Furthermore, we designed the web service server/client software platform which can be applied to robot or ubiquitous sensor applications. For validation of this study we tested it by manufacturing robot hardware for monitoring control which combined tanks and sensors on a LDS4000 engine board mounted with a PXA270 processor. The practical excellence and the efficiency of the result of this study was validated by the comparison of gSOAP message exchange load between the web service client application and the conventional remote monitoring control technique through a web server.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.585-590
• /
• 2011

In the past few years, M2M (Machine-to-Machine) applications have become a hot topic in the wireless industry. While M2M applications can be used for many purposes (smart homes, smart metering/electricity meter reading, fleet management, mobile workforce, automobile insurance, vending machines, etc), and in many sectors (healthcare, agriculture, commercial, industrial, retail, utility, etc.), smart metering applications or smart grids present the biggest growth potential in the M2M market today. M2M platform is the future ubiquitous network technologies which provide the integrated service with the networks and devices. The promising technologies to tackle these problems are the Semantic technologies, for interoperability, and the Agent technologies for management of complex systems. In this paper the information communication technique based on the disaster prevention system's for the M2M, concepts and its requirement technology and application are studied.