• Journal of Veterinary Clinics
• /
• v.33 no.1
• /
• pp.25-29
• /
• 2016

Three Maltese dogs, 5 to 7 months old, were admitted to the Veterinary Medical Teaching Hospital, Chonnam National University with malocclusion including Class IV mesiodistocclusion. In the first case, the treatment was performed by moving the mandibular canine teeth caudally with orthodontic buttons and Masel chains. The second patient was treated for rostroverted mandibular canines using buttons and chains. When distal movement of the mandibular canine teeth was completed, a maxillary arch wire with finger springs was applied to push the incisor teeth forward. In the third case, the treatment began by moving the mandibular canine teeth caudally with buttons and chains. An arch wire with finger springs was applied at maxilla to move the maxillary incisor teeth labially. Additionally, the mandibular incisor teeth were moved lingually by an elastic band attached to the buttons cemented to mandibular canine teeth. As a result, all patients successfully regained a normal occlusion.

• The korean journal of orthodontics
• /
• v.37 no.4
• /
• pp.260-271
• /
• 2007

The purpose of this study was to evaluate the relationships between the occlusal plane angle and craniofacial skeletal pattern in relation to anterior overbite. Methods: Lateral cephalograms of 90 adults with skeletal class III malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of anterior overbite, all patients were classified into 3 subgroups of positive overbite, edgebite, and negative overbite groups. All measurements were evaluated statistically by ANOVA and Duncan's Post Hoc, and correlation coefficients were evaluated among measurements. Results: In this study, some skeletal measurements (saddle angle, articular angle, Y axis, AFH, SN-FH, SN-Mn, FH-Mn) showed a significant difference among the 3 groups in relation to overbite changes. Correlation coefficient showed that PFH/AFH, SN-Mn, Mx-Mn, and FH-Mn showed a significant difference with FH-Occ, Mx-Occ, and Mn-Occ. Regression analysis showed that Mx-Mn had a determination coefficient of 0.714, 0.560, and 0.677 in relation to FH-Occ, Mx-Occ, and Mn-Occ, respectively. Conclusion: This study suggests that consideration of the occlusal plane in relation to the maxillomandibular vertical skeletal state enable the establishment of a more predictable orthognathic surgery result.

• The korean journal of orthodontics
• /
• v.41 no.3
• /
• pp.154-163
• /
• 2011

Objective: The purpose of this study was to quantitatively evaluate relapse tendency after orthodontic treatment and determine the contributing factors by using the American Board of Orthodontics objective grading system (ABO-OGS). Methods: The subjects were 80 patients with more than 2 years of retention period after completing orthodontic treatment at the dental hospitals of Busan University, Kyunghee University, and Dankook University. The posttreatment (T2) and post-retention (T3) ABO-OGS measurements were analyzed in relation to age, gender, Angle's classification, extraction, retention period, and pretreatment condition (initial peer assessment rating (PAR) index, T1) by multiple regression analysis. Results: Among the 7 ABO-OGS criteria, alignment worsened but occlusal contact and interproximal contact improved in T3, but not in T2 ($p$ < 0.01). The 4 other criteria showed no significant differences. Multiple regression analysis showed that alignment, occlusal relationship, overjet, and interproximal contact were significant linear models, but with a low explanation power. Age, gender, Angle's classification, extraction, retention period, and pretreatment condition (initial PAR index, T1) had little influence on the ABO-OGS changes between T3 and T2. Conclusions: An orthodontist's understanding of posttreatment relapse tendency can be useful in diagnosis and during patient consultation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.175-186
• /
• 2022

A crossed occlusion resulting from the presence of posterior teeth in one arch but no opposing teeth in the opposite arch results in collapse of the vertical dimension. In this case, the patient has a class III malocclusion with crossed occlusion and anterior crossbite. In order to evaluate the proper vertical dimension, provisional denture was used to stabilize the vertical occlusal dimension for 3 months. After, provisional fixed restoration was used for the stabilizing occlusal relationship and aesthetic improvement for lip support. Definitive prosthesis in implants in the mandible and abutments in the maxillary were using Porcelain-fused-to-metal crown (PFM) crown and the maxillary unilateral edentulous area was treated with removable partial dentures. Through this, proper support of the posterior region and normal anterior occlusal relationship were formed, and the patient was able to obtain aesthetically and functionally satisfactory treatment results.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.1
• /
• pp.64-71
• /
• 2024

The most critical aspect of full-arch prosthodontic treatment is evaluating whether the patient's vertical occlusal dimension is appropriate, and if necessary, restoring it through increasing vertical dimension. If the vertical occlusal dimension is too low, it can lead to reduced chewing efficiency, as well as not only aesthetic concerns but also potential issues like hyperactivity of muscles and posterior displacement of the mandible. This report is about the patient dissatisfied with pronunciation and aesthetics due to an inappropriate vertical occlusal dimension resulting from prior prosthetic interventions, underwent full-arch prosthodontic restoration treatment. Through the utilization of digital diagnostic apparatus, a comprehensive evaluation was undertaken for patient's vertical occlusal dimension, occlusal plane orientation, and the condition of prosthetic restorations. Through 3D facial scanning, the facial landmarks were discerned, and subsequently, the new occlusal plane was established. This provided the foundation for a digitally guided diagnostic wax-up. An elevation of 5 mm from the incisor was determined. Comprehensive dental rehabilitation was then executed for all remaining teeth, excluding the maxillary four incisors. The treatment protocol followed a systematic approach by initially creating implant-supported restorations on both sides of the dental arch to establish a stable occlusal contact. Subsequently, prosthetic restorations for the natural dentition were generated. Diagnostic and treatment planning were established through the utilization of facial scanning. This subsequently led to a reduction in treatment complexity and an expedited treatment timeline.

• Journal of Oral Medicine and Pain
• /
• v.31 no.3
• /
• pp.245-254
• /
• 2006

While orofacial pain or various dental factors are generally considered as the primary cause of unilateral chewing tendency, there exist several studies indicating that dental factors did not affect the preferred chewing side. The aim of this study was to examine difference of occlusal scheme between the subjects with and without chewing side preference. The difference between the chewing and non-chewing sides in the unilateral chewing group was investigated as well. Computerized, T-Scan II system was used for occlusal analysis. 20 subjects for the unilateral chewing group (mean age of $25.25{\pm}2.84$ years) and 20 subjects for the bilateral chewing group (mean age of $27.00{\pm}5.07$ years) were selected by a questionnaire on presence or absence of chewing side preference and those with occlusal problem or pain and/or dysfunction of jaw were excluded. T-Scan recordings were obtained during maximum intercuspation and excursion movement. The number of contact points, relative occlusal force ratio between right and left sides, tooth sliding area and elapsed time throughout the maximum intercuspation were calculated. Elapsed time for excursion was also investigated. The results of this study shows that the unilateral chewing group had the smaller average tooth contact areas compared with those of the bilateral group (p<0.005). In the unilateral chewing group, the contact areas of non-chewing side are smaller than those of chewing side (p<0.005). The contact areas on their preferred sides were not significantly different with those of right or left side of the subjects without chewing side preference. There was no significant difference in the elapsed time during maximum intercuspation and lateral excursion, the sliding areas and relative of right-to-left occlusal force ratio between the two groups. From the results of this study, it is likely that individuals prefer chewing on the side with more contact areas for efficient chewing.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.1
• /
• pp.50-55
• /
• 2018

Occlusal disharmony is frequently observed among edentulous patients. When artificial teeth come into contact, the unfavorable displacing force may lead to the discomfort, mucosal trauma, or even neuromuscular alterations and emotional disturbances. An optimal occlusal scheme is a critical factor for successful complete dentures. For this case, an edentulous patient with significant interarch size discrepancy due to mandibular prognathism contributing to inadequate function of dentures was treated with complete dentures. The posterior cross-bite tooth setup for compensating the abnormal jaw relations provided a stable and retentive complete denture prosthesis, which was considered adequate by both patient and dentist.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.337-347
• /
• 2009

The treatment of a patient with severely worn dentition is often challenging due to loss of vertical dimension and an uneven occlusal plane. To establish a correct occlusal plane and space for prostheses, it is necessary to increase vertical dimension. Occlusal vertical dimension is the vertical position of mandible to maxilla in centric occlusion. McAndrew reported that in spite of the change of the vertical dimension, the altered occlusion would be maintained if the equal occlusal contacts were established in centric relation. Centric relation is defined as an anatomically and physiologically stable, repeatable posture of the mandible and can be considered a most acceptable treatment and reference position. In this case we tried to treat patients with severely worn dentition by the use of centric relation and increased vertical dimension for the space of prostheses.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.4
• /
• pp.222-228
• /
• 2023

Attrition is the loss of tooth hard tissue due to contact between teeth, and in severe cases, dentin is exposed, accompanied by selective corrosion and excessive wear of teeth, which is called cupping. If these lesions are left untreated, the size of the lesion gradually increases, breaking the unsupported enamel, resulting in a decrease in aesthetics and chewing function. In this case report, patients with cupping and enamel fracture due to severe attrition were directly restored using a resin with soft properties containing organic fillers. In the follow-up observation six years later, most of the filling of the occlusal surface was eliminated, but the filling on the buccal surfaces remained relatively intact, and it was confirmed that this type of resin was suitable for the area where the occlusal force was relatively weak rather than the area where the occlusal force was greatly applied.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.4
• /
• pp.371-379
• /
• 2008

The aim of this study was to evaluate the tightness of proximal tooth contact(TPTC) using a novel device at rest state on implant prostheses. Ten healthy young adults with class I normal occlusion consented to participate in the study and twenty patients were restored with a total 20 single-implant crowns in the left maxillary and mandibular second molars for 10 single-implant crowns, respectively. Test area were divided by 4 groups. UM describes the contact between the upper natural left first molar and natural second molar; LM the contact between the lower natural left first molar and natural second molar; IUM the contact between the upper natural left first molar and implant second molar and ILM the contact between the lower natural left first molar and implant second molar. The TPTC was measured at rest state in each area. The mean TPTC of the UM, LM, IUM and ILM was 1.48(${\pm}0.44$) N, 1.78(${\pm}0.40$) N, 1.14(${\pm}0.37$) N and 1.30(${\pm}0.32$) N respectively. These results indicate that the TPTC was less between natural tooth and implant prosthesis than between natural teeth.