Abstract
The purpose of this study was to evaluate the relationships between the occlusal plane angle and craniofacial skeletal pattern in relation to anterior overbite. Methods: Lateral cephalograms of 90 adults with skeletal class III malocclusions were traced and measured to analyze skeletal factors and occlusal plane angles. In terms of anterior overbite, all patients were classified into 3 subgroups of positive overbite, edgebite, and negative overbite groups. All measurements were evaluated statistically by ANOVA and Duncan's Post Hoc, and correlation coefficients were evaluated among measurements. Results: In this study, some skeletal measurements (saddle angle, articular angle, Y axis, AFH, SN-FH, SN-Mn, FH-Mn) showed a significant difference among the 3 groups in relation to overbite changes. Correlation coefficient showed that PFH/AFH, SN-Mn, Mx-Mn, and FH-Mn showed a significant difference with FH-Occ, Mx-Occ, and Mn-Occ. Regression analysis showed that Mx-Mn had a determination coefficient of 0.714, 0.560, and 0.677 in relation to FH-Occ, Mx-Occ, and Mn-Occ, respectively. Conclusion: This study suggests that consideration of the occlusal plane in relation to the maxillomandibular vertical skeletal state enable the establishment of a more predictable orthognathic surgery result.
본 연구는 악교정 수술을 필요로 하는 골격성 III급 부정교합자의 두개안면형태와 교합평면이 어떤 관련성을 가지고 있는 지를 알아보기 위하여 악교정 수술을 시행하기로 계획된 골격성 III급 부정교합자 90명의 초진 시 측모 두부 방사선계측사진을 대상으로 연구를 하였다. 전치부 피개량에 따라서 positive overbite (PO) group, edge to edge bite (EO) group, negative overbite (NO) group의 세 군으로 분류를 하였으며, 각 군의 골격관계와 상하악 제1소구치와 제1대구치의 교두의 접촉점을 연결한 기능교합평면과의 관계에 대한 항목을 계측하여 상관관계 분석과 회귀 분석을 시행하였다. 연구 결과, 각 군 간의 분류와 상관없이 전치부 피개 교합의 변화에 대해서 saddle angle, articular angle, Y axis, AFH, SN-FH, SN-Mn, FH-Mn 항목이 유의성 있는 차이를 보였다. 특히, 상악 전치부는 기능교합평면에 대한 각도에서 유의성 있는 차이를 보였으며, 하악 전치부는 FH 평면에 대한 각도에서 각 군 간에 유의성 있는 차이를 보였다. 안면 골격 계측 항목과 상하악골에 대한 기능교합평면의 각도 항목들과의 상관관계에서는, 상하악골의 이개 정도를 나타내는 Mx-Mn 항목이 모든 군에서 유사한 정도로 기능교합평면 각도와 가장 높은 상관관계를 보였다. 이를 이용하여 Mx-Mn 항목의 변화에 따라서 FH-Occ, Mx-Occ, Mn-Occ 항목이 어느 정도의 변화를 일으키는지를 알아보고자 회귀분석을 시행한 결과, 결정계수가 각각 0.714, 0.560, 0.677로 나타났다. 따라서 본 연구를 통해서 골격성 III급 부정교합자의 기능교합평면의 형성은 상하악골의 골격적인 수직이개 정도와 깊은 관련성이 있음을 알 수 있었다.