• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.12
• /
• pp.5191-5198
• /
• 2010

Although numerous studies have analyzed the relationship between subway travel demand (STD) and various characteristics of subway catchment area (SCA), a few studies examined the relationship between STD and the structure of pedestrian networks within each SCA. Hence, this study evaluates the structure of pedestrian networks within 79 SCAs in the city of Busan using Space syntax and investigates the relationship between STD and several characteristics of SCA including the spatial structure of pedestrian network. The analysis results show that the spatial integration of pedestrian networks within the SCAs, which represents the magnitudes of walking accessibility to subway station, is positively associated with STD among the three spatial indexes such as integration, connectivity, and intelligibility. In addition, the results show that STD significantly increases as the number of travel gathering facilities and the average floor area ratio within the SCAs increase. This study ultimately corroborates that designing the grid pedestrian network and assigning the travel gathering facilities to the compact buildings within SCAs are needed to ameliorate the spatial structure of SCA in the city of Busan as transit-oriented development system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.795-810
• /
• 2019

In this paper, The study was conducted on the method to roughly determine the area and length of the multi-utility tunnel before the planning and design phase of the multi-utility tunnel construction. For this purpose, four feasibility indexes were used: traffic density, population density, disaster prevention index (number of workers), and urbanization rate, which reflect the regional characteristics. The installation criteria were set in consideration of the average value and minimum value of the feasibility indexes for the tunnel type among areas that can be installed in the multi-utility tunnel of Seoul. The analysis area included 200 areas based on 14 zones. The results of the analysis based on the minimum value of feasibility indexes indicated that the tunnel type of multi-utility tunnel is suitable for 39 areas with high traffic volume and population. On the other hand, the 'gun' area, etc., has a wider population than the 'si' and 'gu', suggesting that it is not suitable to install multi-utility tunnel. In addition, it can be seen that the larger the index value centered on the minimum value of each index, the smaller the tunnel type of multi-utility tunnel installation area.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.117-127
• /
• 2008

After the deregulation of the aviation market in the United States in 1978, airlines took advantage of the possibilities of the liberalized market and reorganized their networks. Then, the hub-and-spoke networks became widely used in the aviation market. The framework of hub-and-spoke network made it feasible to amplify flight networks. Thus, a number of airlines were able to fly to more destinations than ever before through the networks. Amplification of networks can be implementing through the transfer of passengers, transshipment of cargo, or both most researches have been concentrated on the passenger aspect at airports worldwide. Air cargo, however, has become one of the most significant areas at hub airports to keep their leading position in terms of the provision of services and handling volumes. This paper investigates the connectivity of airfreight networks as the temporal concentrations in current network at Incheon International Airport. In order to evaluate airline flight schedule effects to stimulate hubbing at an airport, the indirect connectivity can be considered to be the number of direct frequencies, the minimum connecting times and the quality of the connection determine indirect connectivity. Therefore the connectivity of freight transshipment depends on both the quality of the connection at the hub airport and the quality of the indirect flight compared to the direct flight. In addressing these issues, this paper analyzes the connectivity of flight schedules using a temporal wave-system structure and estimates the degree of connectivity and quality of connectivity applying the NETSCAN model.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.73-81
• /
• 2009

While various factors in passenger and freight demand analysis affect on destination choice, a key factor, in general. is an attractiveness measure by size variable (e.g., population. employment etc) in destination zone. In order to measure the attractiveness, some empirical studies suggested that disaggregate gravity model are more suitable than aggregate gravity model. This study proposes that truck travelers trip diary data among Korean commodity flow data could be used to estimate the behaviors of incorporating trip departure time, activity duration and attractiveness in destination. As a result, the main findings of size and distance variables coincide with the conventional gravity model having a positive effect of population variable and a negative effect of distance variable. Due to disaggregate gravity modeling, the unique findings of this study reports that small trucks are more likely to choose short distance and early morning, morning peak and afternoon peak departure time choice. On the other hand, large trucks are more likely to choose long distance and night time departure time choice.

• Journal of Digital Convergence
• /
• v.12 no.11
• /
• pp.289-298
• /
• 2014

Recently, the traditional paradigm in railroad technology is changing as more efficient and cost-effective electric vehicle (EV) technologies have emerged. The original concept of PRT (Personal Rapid Transit) proposed in the past has come to be regarded as unrealistic, but its feasibility is improving through the utilization of an EV platform. In particular, battery-powered vehicles pose difficult technical challenges in attempts to achieve reliable and efficient operation. However, based on the inductive power transfer (IPT) technology, the fast charging of supercapacitors with high energy density can contribute to overcoming this technical challenge and promote the transition to electric-powered ground transportation by improving the appearance of cities. This study discusses the development process of a power supply system for PRT, including concept design, numerical analysis, and device manufacturing, along with performance predictions and evaluations. In terms of results, the system was found to meet the performance requirements for power supply modules on a test-bed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.6D
• /
• pp.809-817
• /
• 2008

This paper deals with the development of ViscoElastic Continuum Damage Finite Element Program (VECD-FEP++) and its verification with the results from both field and laboratory accelerated pavement tests. Damage characteristics of asphalt concrete mixture have been defined by Schapery's work potential theory, and uniaxial constant crosshead rate tests were carried out to be used for damage model implementation. VECD-FEP++ predictions were compared with strain responses (longitudinal and transverse strains) under moving wheel loads running at different constant speeds. To this end, an asphalt pavement section (A5) of Korea Expressway Corporation Test Road (KECTR) instrumented with strain gauges were loaded with a dump truck. Also, a series of accelerated pavement fatigue tests have been conducted at pavement sections surfaced with four asphalt concrete mixtures (Dense-graded, SBS, Terpolymer, CR-TB). Planar strain responses were in good agreement with field measurements at base layers, whereas strains at both surface and intermediate layers were found different from simulation results due to the complexity of tire-road contact pressures. Finally, fatigue characteristics of four asphalt mixtures were reasonably described with VECD-FEP++.

• Journal of the Korean Regional Science Association
• /
• v.31 no.3
• /
• pp.113-130
• /
• 2015

This study is to identify urban characteristics affecting obesity of elementary, middle and high school students. Most of previous studies in Korea discussed healthy city focusing on adults. We list up possible urban characteristic factors that are considered to affect adolescent obesity from previous studies, and then conduct regression analysis to find policy implications in urban planning. Based on the physical examination data of adolescent students in Seoul from the Ministry of Education, we set the rate of obese students by school as a dependent variable. Urban characteristic variables are set as explanatory variables, and measured by buffer analysis within 500m, 1000m and 1500m. The result of regression analysis shows that the obese rate of students increases with adults' lower education level, higher rate of non-apartment houses, older age of houses and more homogeneous land use. However, the result does not indicate that population density, accessibility to public transportation and the urban park are significant factors for adolescent obesity. Based on this result, urban planning policy for promoting adolescent health should be discussed further.

• International Journal of Highway Engineering
• /
• v.12 no.1
• /
• pp.29-37
• /
• 2010

Porous pavements can provide road users with beneficial characteristics such as skid resistance and surface water drainage under rainy condition, and they cause less tire-road noise than conventional hot mix asphalt(HMA) pavements. However, voids of porous pavements are easily clogged by road debris at early stages, which leads to frequent maintenance works. Therefore, this study focused on the way of minimizing void clogging in porous pavements. During mixture design, the quantity of coarse aggregate has been increased to form many straight void conduits (SVCs) in porous HMAs. These SVCs were found to be effective resisting the void clogging problems. Four different porous HMAs(19mm, 13mm, 10mm, and 8mm) were developed and placed on highway roads. Their performances were validated with field tests during the past four years.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.1
• /
• pp.43-48
• /
• 2010

Proctor test A or D method of compaction is the most common laboratory test for investigation of subgrade soil characteristics, however, compression type using roller is used in the field. The differences between laboratory and field compaction have considerable error as application to subgrade soil properties of laboratory test. The investigation of compacted soil is carried into effect to solve the problem. The gyratory compactor which is made to reproduce the field density of asphalt mixture, coming from traffic loads, has an advance to compact it similar to arrangement of field aggregate particles. This gyratory compactor has several problems of investigation of compacted soil, because it has designed to make initial asphalt specimens. The main objectives of this research are grasping problems when compacted soil test using the gyratory compactor and showing solutions. It has made a comparative study of difference of the percentage of water content and weight, which are before and after compaction, about the pressure of compaction, frequency of compaction and speed of compaction. And it also has investigated finding maximum percentage of water content which not occur change of percentage of water content after compaction and searching how has an effect on drawing compaction curve.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.39 no.2
• /
• pp.1-10
• /
• 2016

In this paper, we present a new way to derive the mean cycle time of the G/G/m failure prone queue when the loading of the system approaches to zero. The loading is the relative ratio of the arrival rate to the service rate multiplied by the number of servers. The system with low loading means the busy fraction of the system is low. The queueing system with low loading can be found in the semiconductor manufacturing process. Cluster tools in semiconductor manufacturing need a setup whenever the types of two successive lots are different. To setup a cluster tool, all wafers of preceding lot should be removed. Then, the waiting time of the next lot is zero excluding the setup time. This kind of situation can be regarded as the system with low loading. By employing absorbing Markov chain model and renewal theory, we propose a new way to derive the exact mean cycle time. In addition, using the proposed method, we present the cycle times of other types of queueing systems. For a queueing model with phase type service time distribution, we can obtain a two dimensional Markov chain model, which leads us to calculate the exact cycle time. The results also can be applied to a queueing model with batch arrivals. Our results can be employed to test the accuracy of existing or newly developed approximation methods. Furthermore, we provide intuitive interpretations to the results regarding the expected waiting time. The intuitive interpretations can be used to understand logically the characteristics of systems with low loading.