• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.71-80
• /
• 2008

Typically uncontrolled intersections are characterized by the absence of signal, stop and yield sign, and by very light traffic volume. In this study, a gap acceptance model for such uncontrolled intersections has been modeled. The motivation is to identify the behavior of drivers so that the traffic flow phenomena can be easily understood. For this, actual traffic survey was accomplished at intersections in Suwon and the data have been fed into modeling process. The logit model was used and the results showed that total delay experienced by drivers, turning right movement, age, sex, and the existence of passenger affected gap acceptance. For example, male drivers, with experiencing longer delay and having passenger(s) with them, accepted shorter gaps. These identified characteristics regarding gap acceptance could be used for facility design and/or safety oriented traffic information dissemination near uncontrolled intersections.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.127-135
• /
• 2004

교차로 안전성 진단과 관련된 기존의 연구는 교차로 상에서 발생한 사고 자료에 기초하여 교차로 기하구조 요소, 교통량 및 신호운영방법 등과 관련된 요인을 변수로 사용하여 교통사고건수 예측모형 개발에 관한 연구가 대부분이다. 그러나, 분석하고자 하는 대상 교차로의 사고건수 예측모형을 개발하기 위해 필요한 교통사고 자료의 경우 단 기일에 걸쳐 획득되지 않으며 몇 년간의 사고 자료를 요구할 수도 있다. 이러한 자료를 이용하더라도 사고 발생 기간동안 교차로 사고에 영향을 미치는 요인(교차로 운영방법, 기하구조 등)이 변화될 수도 있다는 문제점을 지닌다. 이와 같은 이유로 교차로 안전성을 진단하는데 있어 기존 교통사고 자료는 언제나 절대적인 자료가 될 수 없다. 이에 대한 보완책으로, 3일에서 5일정도의 조사 자료만으로도 안전성 진단이 가능한 상충자료를 이용하여 교차로 안전성 진단을 할 수 있다. 본 연구는 기존사고 자료를 이용하여 사고 발생에 기인하는 여러 변수들을 교통사고심각도와의 상관관계를 분석하고, 상관관계가 높은 변수를 이용하여 신경망 사고심각도 예측모형을 개발하였으며, 모형 검증을 위해 다중회귀사고심각도 예측모형을 개발하여 비교 평가한 결과 신경망 사고심각도 예측모형의 예측력이 우수한 것으로 나타났다. 현장에서 조사된 상충자료를 신경망 사고심각도 예측모형에 적용하여 상충이 사고로 연결 될 경우 사고심각도를 예측하였으며, 예측된 사고심각도에 가중치를 부여하여 대상 교차로 위험우선순위를 결정한 결과 사고비용에 기초한 위험우선순위 결정법과 같은 순위의 결과를 도출하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3D
• /
• pp.231-240
• /
• 2010

As majority of the traffic accidents in intersections is caused by human factor, a close examination is required on its contributing factors through measuring the psychological and physiological response according to the driving characteristics of the drivers and the road conditions. In this study, for the safety evaluation of individual intersection considering human factors of the drivers, electroencephalography reaction was measured utilizing cutting-edge measuring equipment and survey on drivers' cognitive characteristics in ordinary times and while driving test was conducted. The relationship between the electroencephalography response when approaching the intersection and cognitive evaluation survey data in driving test was clarified, and individual intersection safety evaluation model was built considering cognitive evaluation factor and the reaction of a bio-response electroencephalography data. As a result, I could find out that cognitive evaluation was made through the reaction of a bio-response (Electroencephalography) process because electroencephalography reaction of a bio-response showed differently by the physical characteristics of the intersection and cognitive evaluation had a difference.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.25-32
• /
• 1988

Vehicle platoons starting a stopline are dispersed while travelling along the street and the delay at the next intersection depends on the arrival pattern of dispersed traffic flow. In this paper, the platoon dispersion charactiristics of our country, especially the time gap between passenger cars and buses caused by the dwell time at bus stops, were investigated through travel time surveys. Based on the survey results, on improved analysis method of intersection delay is proposed.

• Journal of the Korean Chemical Society
• /
• v.65 no.5
• /
• pp.320-326
• /
• 2021

This study investigated the effect of the structure of the crosslinking agent used in contact lens polymerization on the physical properties and drug dissolution of contact lenses.es Contact lenses were manufactured using 0.3% and 3% of 4 types of crosslinking agents, respectively, and ofloxacin was used as the drug. Contact lenses using hydrophilic crosslinking agents improved water contents and wettability, and the more hydrophilic functional groups, the greater the effect. Contact lenses with a high concentration of crosslinking agent had a low concentration of eluted drug and a longer release time. The cross-linking agent structure of contact lenses had an effect on improving the performance of contact lenses and controlling drug release.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.63-76
• /
• 2008

The goals of this study are to develop travel time functions based on intersection delay and to analyze the applicability of the functions to traffic assignment models. The study begins with the premise that the existing assignment models can not effectively account for intersection delay time. In pursuing the goals, this study gives particular attention to dividing the link travel time into link moving time and stopped time at node, making the models based on such variables as the travel speed, volume, geometry, and signal data of signalized intersections in Cheongju, and analyzing the applicability of these models to traffic assignment. There are several major findings. First, the study presents the revised percentage of lanes (considering type of intersection) instead of g/C for calculating intersection delay, which is analyzed to be significant in the paired t-test. Second, the assigned results of applying these models to the Cheongju network in EMME/2 are compared with the data observed from a test car survey in Cheongju. The analyses show that the BPR models do not consider the intersection delay, but the modified uniform delay model and modified Webster model are comparatively well fitted to the observed data. Finally, the assigned results of applying these models are statistically compared with the test car survey data in assigned volume, travel time, and average speed. The results show that the estimates from the divided travel time model are better fitted to observed data than those from the BPR model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.187-192
• /
• 2015

In general, design of urban intersections are fundamentally different from rural intersections, but current urban intersection design has been appled to rural standards. This study has suggested the design standard for urban intersection grades based on the existing literature, field investigating and comparative analysis. Moreover, this study analyzes and compares the differences between urban and rural intersections, and intersections have been derived by appropriate design standards after reviewing the domestic and international grades design criteria. Site survey was performed to validate the derived design criteria by analyzing statistically to establish the design standards. Results were produced for the intersection portion grade standards by comparing the number of instructions which produced appropriate slope degree from 2.5% to 3% in normal condition and slope can be extended to 5% in some critical cases. In-situ investigation was performed to validate the produced data where slope was found from 0.0~8.6%. Additional data of accident analysis were also collected for the validation of the suggested data and correlation analysis was performed using the SPSS tool. Data were analyzed statistically using 95% significance level for vehicle-to-vehicle collided, head-on collision accident rates, where accident rates significantly correlated with the grade. Therefore, appropriate grade at the intersection should be designed and applied in order to reduce the number of accidents at the intersection. Finally, appropriate grades for urban intersections are suggested from 1-3% for normal cases and grades could extend up to 5% for unavoidable cases where extra care must be taken when designing.

• Korean journal of applied entomology
• /
• v.29 no.3
• /
• pp.194-200
• /
• 1990

The diamondback moth (Plutella xylostella L.) was selected over 24 generations with fenvalerate. The resulting resistant strain was tested to study development of insecticide resistance and cross resistance to some insecticides in the laboratory. Insecticide resistance of diamondback moth at the 24th generation devleoped 66.2 fold compared to the parent strain for fenvalerate. The fenvalerate selected strain exhibited 145 fold, a high level of cross resistance to deltamethrin, and also showed 17.4-45.0 fold cross resistance to alphamethrin, cypermethrin, fenvalerate, permethrin, and tetramethrin in the pyrethroid insecticides. The fenvalerate selected strain showed 2.5-4.3 fold, low cross resistance to diazinon, dichlorvos, EPN, BPMC, cabaryl, and methomyl. However, it did not show cross resistance to acephate, fenitrothion, phenthoate, and carbofuran.

• Proceedings of the KOR-KST Conference
• /
• 1998.10b
• /
• pp.311-311
• /
• 1998

일반적으로 교차로에서의 보행자 사고는 대부분이 횡단보도에서나 횡단보도 주변에서 발생하는 것이 많다. 이것은 운전자의 안전의식부족뿐만 아니라 보행자들이 교통법규를 지키지 않기 때문이다. 교통사고는 운전자나 보행자를 막론하고 안전의식 수준 및 안전시설의 질적 수준과 밀접한 관련이 있다. 특히 횡단보도 위치와 관련한 정지선에 대한 기준이 없어서 횡단보도 전후에 정지선이 2개가 설치된 곳이 많아 차량간의 사고를 유발하고, 보행자는 보행동선을 단축하기 위해 횡단보도 주변횡단이라는 위험한 행태를 유발하지만 이에 대한 연구나 대안제시가 이루어지지 않고 있다. 본 연구는 요인분석법이란 다변량 통계기법을 통해서 사고기록과 형태자료를 분석하였다. 사고기록은 정지선이 2개에서 1개로 변경된 25개 교차로에 대한 보행자와 차량의 유형별, 위치별, 피해정도별 사고기록을 조사 분석하고 행태분석은 현재 정지선이 2개인 곳과 기하구조가 유사한 정지선 1개인 곳을 하나의 쌍으로 해서 모두 8쌍(16개의 교차로 횡단보도)를 조사 분석하였으며, 마지막으로 설문조사를 통해서 보행자의 교통법규 준수와 인식정도에 대한 조사를 통해 보행자들의 인식과 행태조사를 통한 교통법규 준수 정도를 알아보았다. 사고자료의 분석을 통해서 첫째, 정지선이 2개인 교차로는 교차로내 차량사고, 접근부의 후면 추돌사고, 횡단보도에서 보행자사고가, 둘째, 정지선이 1개인 교차로는 유출부 차량사고가 많은 것으로 나타났으며, 행태자료의 분석을 통해서는 첫째, 정지선이 2개인 곳은 횡단보도를 이탈 또는 진입하면서 횡단하는 보행자, 점멸신호에 횡단 시작하는 보행자의 행태와 보행자 신호에 횡단보도를 통과하는 차량, 둘째, 정지선이 1개일 때는 횡단보도를 침범해서 정지하는 차량, 도로에 내려서서 기다리는 보행자가 많은 것으로 나타났다. 마지막으로 설문조사와 행태조사를 종합하면, 보행자들의 인식으로는 약 71%의 응답자와 점멸신호의 의미를 알고, 전체 응답자의 약 58%가 점멸신호에 건너지 않고 기다린다는 응답(교통법규준수)을 했으며, 실제 행태에서는 약 12.4%가 위반하는 것(87.6% 법규준수)으로 나타났다. 보행자들이 응답한 것보다 실제 행태에서는 더 많은 보행자가 교통법규를 준수하는 것으로 나타났으며, 횡단보도를 이용하는데 있어서 횡단보도를 침범하는 차량과 신호시간이 적다는 의견이 많았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.725-733
• /
• 2018

With urbanization projects involving trunk roads progressing, many simple interchanges, which separate passing traffic into the main traffic and access subtraffic, are being constructed to maximize the traffic capacity. Under the current Road Connection Rule, the access-prohibited section in an interchange is determined based on the access lane and limit distance in the complete interchange road, but separate criteria for the simple interchange are not defined. This may cause confusion in the Road Management Office's determination of the access-prohibited section in the simple interchange, or lead to the application of the criteria for the access-prohibited section in the complete interchange without considering the features of such interchange. This study conducted a comparative analysis of the domestic and overseas systems related to the installation of access section in trunk roads, such as general national roads. This paper presents a survey of the methods for applying the access-prohibited section in the interchange along with the actual cases and proposes improvement measures for a rational calculation of the access prohibited installation section in the simple interchange to minimize the downsides associated with the application of the extremely strict criteria. The proposed road connection rule improvement measures based on the consideration of the purpose of installing the simple interchange and on the consideration the features of the simple interchange are expected to prevent administration confusion by the field road management offices as well as the waste of unnecessary efforts and costs by petitioners so they can boost the service satisfaction for people and the administrative reliability.