• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.31-38
• /
• 2020

The characteristics of ship traffic routes and the long term fluctuation in marine traf ic volume of the incoming and outgoing routes of the Yeosu Gwangyang Port were analyzed using vessel traffic data from the past 22 years and a real-time vessel traffic volume survey performed for 72 hours per year, for three years, between 2015 and 2017. As of 2017, the number of vessels passing through Yeosu Gwangyang Port was about 66,000 and the total tonnage of these ships was about 804,564 thousand tons, which is a 400 % increase from the 189,906 thousand tons shipped in 1996. Specifically, the dangerous cargo volume was 140,000 thousand tons, which is a 250 % increase compared to 1996. According to the real-time vessel traffic volume survey, the average daily number of vessels was 357, and traf ic route utilization rates were 28.1 % in the Nakpo sea area, 43.8 % in the specified sea area, and the coastal area traf ic route, Dolsan coastal area, and Kumhodo sea area showed the same rate of 6.8 %. Many routes meet in the Nakpo sea area and, parallel and cross passing were frequent. Many small work vessels entered the specific sea area from the neighboring coastal area traffic route and frequently intersected the path of larger vessels. The anchorage waiting rate for cargo ships was about 24 %, and the nightly passing rate for dangerous cargo ships such as chemical vessels and tankers was about 20 %. Although the vessel traffic volume of Yeosu Gwangyang Port increases every year, the vessel traffic routes remain the same. Therefore, the risk of accidents is constantly increasing. The route conditions must be improved by dredging and expanding the available routes to reduce the high risk of ship accidents due to overlapping routes, by removing reefs, and by reinforcing navigational aids. In addition, the entry and exit time for dangerous cargo ships at high-risk ports must be strictly regulated. Advancements in the VTS system can help to actively manage the traffic of small vessels using the coastal area traffic route.

• Journal of Internet Computing and Services
• /
• v.16 no.2
• /
• pp.49-55
• /
• 2015

According to the statistics of traffic accidents over recent 5 years, traffic accidents during the night times happened more than the day times. There are various causes to occur traffic accidents and the one of the major causes is inappropriate or missing street lights that make driver's sight confused and causes the traffic accidents. In this paper, with smartphones, we designed and implemented a lane luminance measurement application which stores the information of driver's location, driving, and lane luminance into database in real time to figure out the inappropriate street light facilities and the area that does not have any street lights. This application is implemented under Native C/C++ environment using android NDK and it improves the operation speed than code written in Java or other languages. To measure the luminance of road, the input image with RGB color space is converted to image with YCbCr color space and Y value returns the luminance of road. The application detects the road lane and calculates the road lane luminance into the database sever. Also this application receives the road video image using smart phone's camera and improves the computational cost by allocating the ROI(Region of interest) of input images. The ROI of image is converted to Grayscale image and then applied the canny edge detector to extract the outline of lanes. After that, we applied hough line transform method to achieve the candidated lane group. The both sides of lane is selected by lane detection algorithm that utilizes the gradient of candidated lanes. When the both lanes of road are detected, we set up a triangle area with a height 20 pixels down from intersection of lanes and the luminance of road is estimated from this triangle area. Y value is calculated from the extracted each R, G, B value of pixels in the triangle. The average Y value of pixels is ranged between from 0 to 100 value to inform a luminance of road and each pixel values are represented with color between black and green. We store car location using smartphone's GPS sensor into the database server after analyzing the road lane video image with luminance of road about 60 meters ahead by wireless communication every 10 minutes. We expect that those collected road luminance information can warn drivers about safe driving or effectively improve the renovation plans of road luminance management.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.1075-1082
• /
• 2016

In order to calculate the optimum installation interval between a speed hump and hump type crosswalk that are installed continuously in succession, this study examined the speed of a vehicle that passes different intervals between speed humps and hump type crosswalks from the approach section of a roundabout having a maximum speed limit of 30km/h; analyzed the effects of speed humps and hump type crosswalks installed continuously in succession on vehicle driving speed; and simulated the optimum installation height of hump type crosswalk. As a result, the following conclusion was drawn. First, it was found that the optimum interval between a speed hump and hump type crosswalk, which are the representative traffic calming techniques for reducing vehicle speed, to control vehicle speed under 30km/h is 30m. Second, as a result of comparing the deceleration of a vehicle that pass hump type crosswalks, it was found that if the installation interval is 65 m and above, a speed hump and hump type crosswalk had no effect. Therefore, it is desirable that the maximum installation interval between a speed hump and hump type crosswalk for controlling vehicle speed within a fixed road section should not exceed 65m. Third, the analysis showed that the optimum installation height of hump type crosswalk is 6-8cm in case vehicle speed at the approach section is 20km/h or lower, 8-10cm in case of 30km/h, and 10cm in case of 30km/h or higher, respectively. Fourth, even at a road section on which a speed hump and hump type crosswalk are installed, speed reduction effects may sometimes be insignificant due to a driver's studying effect, traffic conditions and so on. Thus, it is judged that speed reduction effects will be greater if several traffic calming techniques such as speed hump, chicane, and choker are applied at the same time. Therefore, in case of applying traffic calming techniques for the purpose of reducing vehicle speed in order to promote pedestrian safety, the composite application of several techniques should be considered.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.93-102
• /
• 2011

The Korean government recently has focused on variety of policies to promote the use of bikes to control the emission of carbon. However, bike facilities with no regard to the safety and comfort of bike drivers has made inefficient bike roads. Also, the accidents related to bikes have increased rapidly. This study proposes the proper types of the bike roads considering land use and bike driver characteristics. The elements classifying the bike driver characteristics are driven through oneway ANOVA and cluster analysis. It is found that the types of the bike roads can be classified by the ratio of child and elderly bikers and the ratio of heavy trucks. Also, the each type is characterized by the land use types such ad residential, commercial and industrial areas through cluster analysis. According to the results of the cluster analysis, installation of bike roads in residential area needs to consider convenience and safety simultaneously. It is also found that convenience should be the most considerable factor in commercial area. Lastly, safety should be considered in industrial area. Recommended methodology and bike road type based on the land use and bike driver's characteristics can be useful to develop bike-friendly environments and increase mode share of bikes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.16 no.4
• /
• pp.407-414
• /
• 2010

The fairway within the area of Yul-do and Songdo located near the Myeongnyang-sudo approaches south of Mokpo harbor is well guided by traffic separation scheme and other navigational aids. However, that part of the waterways where Yul-do is located sits at the cross-roads of marine traffic and is subjected to some potential risks in the voyage navigation: the effect of climatic phenomenon, the disregard of most ships in using the western sector of the fairway creating a congestion in the eastern sector, and lastly, the disadvantageous erect of the location and height of Yul-do island that hinders good lookout. This study investigates the environmental conditions that prevailed in the area in the span of 5-year period and the marine traffic situation taken from the data within the 72-hour period The navigational hazards and marine casualties are also be presented. The results are analyzed and are made the basis of a proposal for an improved separation of traffic. Thereafter, an evaluation is carried out by using the components of marine traffic flow simulation and ES modeling index. It is evaluated through simulation by the use of full-mission ship handling simulator.

• Korean journal of food and cookery science
• /
• v.18 no.3
• /
• pp.355-364
• /
• 2002

For the introduction of HACCP to industry food service, a survey was conducted from 150 dieticians and 40 managers on their recognition on HACCP system. The questionnaire of the survey included the status of current food safety management, management responsibilities, recognition on HACCP, problems in HACCP introduction. The majority of respondents was satisfied with the current food safety management, and the food service managers were more confident than dieticiant in terms of food safety. Foodservice managers (100%) and dieticians (96%) recognized HACCP system; however, they responded the application of HACCP to industry food service were only 27% and 12.5%, respectively. They pointed out the reasons that they cannot introduce HACCP to their industry food service were the lack of benefits and good facilities. Dieticians strongly recognized the need of correction oi food safety manasement in industry food service, compared with food service managers. The results suggest that the introduction of HACCP to industry food servife should be accomplislled by continuous education and information on food safety, improving facilities and a variety of benefits to HACCP-implemented companies from the government.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.5
• /
• pp.919-929
• /
• 2013

Recently, a variety of IT technologies are applied to the vehicle. However, some vehicle-IT technologies without security considerations may cause security problems. Specially, some researches about a smart key system applied to automobiles for authentication show that the system is insecure from replay attacks and modification attacks using a wireless signal of the smart key. Thus, in this paper, we propose an authentication method for the driver by using driving patterns. Nowadays, we can obtain driving patterns using the In-vehicle network data. In our authentication model, we make driving ppatterns of car owner using standard normal distribution and apply these patterns to driver authentication. To validate our model, we perform an k-fold cross validation test using In-vehicle network data and obtain the result(true positive rate 0.7/false positive rate is 0.35). Considering to our result, it turns out that our model is more secure than existing 'what you have' authentication models such as the smart key if the authentication result is sent to the car owner through mobile networks.

• Journal of Engineering Education Research
• /
• v.16 no.5
• /
• pp.43-52
• /
• 2013

We surveyed perceptions of faculty, students, and enterprisers in engineering about gender issue in engineering. A total of 59 faculty members, 335 students (226 male, 109 female) of Korea National University of Transportation, and 28 employers of Chungbuk location were selected. The 25 survey questions for faculty, 30 for students, and 5 for employers were made. The analysis methods used included ${\chi}^2$ for cross analysis method. The results showed that faculty in general perceived differences between genders. They also perceived that women engineering students has a lack of leadership and low possibility of success in career in engineering. Also, they perceived disadvantages in application processes of women students. However, they expressed they did not reflect those factors in teaching and career advices. Women engineering majors showed low confidence in getting a job and success in career. They also thought they had no opportunities to gender-sensitive education in engineering courses. They were also very negative toward aptitude in engineering. These results were very similar to those of faculty. On the other hand, men students showed very low awareness of their women peers' perceptions. The perception of enterprisers was also different from faculty and students. These results indicate that there should be changes in perceptions of faculty and students in engineering for employments. For better education for women engineering majors, further research is needed.

• Journal of Korea Water Resources Association
• /
• v.31 no.6
• /
• pp.821-832
• /
• 1998

This study investigates the prediction of daily water supply, which is a necessary for the efficient management of water distribution system. Fuzzy neuron, namely artificial intelligence, is a neural network into which fuzzy information is inputted and then processed. In this study, daily water supply was predicted through an adaptive learning method by which a membership function and fuzzy rules were adapted for daily water supply prediction. This study was investigated methods for predicting water supply based on data about the amount of water supplied to the city of Kwangju. For variables choice, four analyses of input data were conducted: correlation analysis, autocorrelation analysis, partial autocorrelation analysis, and cross-correlation analysis. Input variables were (a) the amount of water supplied (b) the mean temperature, and (c)the population of the area supplied with water. Variables were combined in an integrated model. Data of the amount of daily water supply only was modelled and its validity was verified in the case that the meteorological office of weather forecast is not always reliable. Proposed models include accidental cases such as a suspension of water supply. The maximum error rate between the estimation of the model and the actual measurement was 18.35% and the average error was lower than 2.36%. The model is expected to be a real-time estimation of the operational control of water works and water/drain pipes.

• Journal of Radiation Protection and Research
• /
• v.32 no.2
• /
• pp.79-88
• /
• 2007

When an accident occurs at nuclear power plant and radionuclide material is released to the area around the plant, public evacuation is considered as a measure to protect the safety of the residents nearby. This study draws factors required to estimate evacuation time and make estimation of the time to evacuate all residents from the EPZ of Wolsong site in consideration of traffic condition in the neighborhood and on the basis of field data around the site for each factor. The traffic capacity and the traffic volume by season were investigated for the traffic analysis and simulation within EPZ of Wolsong site. As a result, the background traffic volume by season were established. To estimate TGT(Trip Generation Time), the questionnaire surveys were carried out for resident and transient. The TSIS code was applied to traffic analysis in the events of daytime/night and normal/adverse weather under normal day/summer peak traffic condition. The results showed that the evacuation time required for total vehicles to move out from EPZ took generally from 118 to 150 minutes. The evacuation time took longer maximum 17 minutes at night than daytime during summer peak traffic.