• Resources Recycling
• /
• v.31 no.2
• /
• pp.3-11
• /
• 2022

Owing to the global development of high-strength alloys and renewable energy industries, the demand for vanadium, a key raw material in these industries, is expected to increase. Until now, vanadium has been recovered as a by-product of the industry, but interest in its direct recovery from minerals has increasing with its significantly increasing demand. In particular, the recovery of vanadium from stone coal ore and vanadium titano-magnetite (VTM) containing vanadium has been actively researched in China, which has the largest reserves and production of vanadium in the world. In Korea, a large amount of VTM also occurs in the northern part of Gyeonggi-do, and fundamental research and technical development is being conducted to recover vanadium. It is necessary to understand the current status of the separation technology used worldwide to satisfy the demand for metals such as vanadium, which currently depends on imports.

• Korean Journal of Organic Agriculture
• /
• v.29 no.4
• /
• pp.561-574
• /
• 2021

This study was conducted to evaluate the control efficacy of the organic farming materials (OFMs) on tuber rot of Gastrodia elata caused by Fusarium spp. The antifungal activities in vitro as well as the suppressive effect of 15 OFMs on the spore germination and germ tube growth by inoculating spore suspension on immature tubers in vivo were investigated. 7 OFMs inhibited the mycelial growth of Fusarium spp. and 7 of them were microbial agents. In the screening using immature tubers, 3 OFMs were very effective with control efficacy value of 70%. Among them, sulfur provided suppressive effect on both mycelial growth and spore germination against tuber rot of G. elata. Finally, 3 OFMs were selected to test the protective and curative effects, and all chosen OFMs significantly suppressed disease incidence when applied in the preventive action, in comparison with the curative action. Especially, sulfur and Bacillus subtilis gave excellent protective control efficacy with control values of 93.2% and 86.9%, respectively, whereas its curative control effect was relatively low (73.3%, 60.2%). On the other hand, the preventive and curative effects of citronella + paraffin oil + ethyl alcohol were 73.3% and 67.0%, respectively. This study suggests that tuber rot of G. elata can be controlled by some OFMs in the rain shelter greenhouse under continuous cultivation condition and protective treatment is more important and efficient.

• Economic and Environmental Geology
• /
• v.55 no.5
• /
• pp.447-463
• /
• 2022

The lime and clay that used in the construction of the Tomb of King Muryeong and the Royal Tombs in Gongju are auxiliary materials, and are used joint and plaster materials for the wall to play a role of structural support. In this study, the homogeneity between the tombs and material characteristics were interpreted through quantitative analysis of lime and clay. As a result of microtexture and composition analysis, almost the same minerals were identified in each sample groups, and similar characteristics were shown in thermal analysis. Geochemically, it is confirmed that the behavior characteristics are very similar regardless of the tombs. The compositions is also confirmed high homogeneity in the diagrams of CaO-MgO-SiO₂, RO₂-(RO+R₂O) correlations, A-CN-K and A-CNK-FM triangles. Therefore, it is interpreted that the clay used for the construction of the tomb complex was supplied from around area, and the raw materials of lime were produced using shell fragments of oyster family based on mainly composed of calcite. It is interpreted that the raw materials of lime were supplied from middens along the west coast of down the Geumgang river in Korean peninsula, but the consideration of the supply site, needs to be cross-validated through stable isotope analysis, use of carbonate rock and reproduction experiments.

• Journal of Korea Foundry Society
• /
• v.43 no.3
• /
• pp.107-136
• /
• 2023

Natural silica sand was commonly used for sand casting of cast steel products, and chromites sand was used to suppress seizure defects due to the lack of thermal properties of silica sand. However there are disadvantages such as deterioration by repeated use, system sand mixing problem, difficulty separating and removing, increased during mold according to high density and to being waste containing chrome. Recently, industrial waste reduction and atmospheric environment improvement have been highlighted as important tasks in the casting industry. In order to solve the problems that occur when using foundry Sand and to improve the environment of casting factories, various artificial sands that can be applied instead of natural silica sand have been developed and introduced. Artificial sands can be classified into artificial sand manufactured by the electric arc atomization or gas flame atomization, artificial sand manufactured by the spray drying & sintering process, artificial sand manufactured by the sintering & crushing process and exhibit different physical properties depending on the type of raw-minerals and manufacturing method. In this study, comparative evaluation tests were conducted on the physical properties of various foundry sands, mold strength, physical durability, thermal durability, and casting test pieces. When comprehensively considering the actual amount of molding sand used according to density, the mold strength according to the shape of sand, the physical and thermal durability of foundry sand, and the heat resistance characteristics of foundry sand, 'Molten artificial sand A1' or 'Molten artificial sand B' is judged to be the most suitable spherical artificial sand for casting of heavy steel castings.

• Economic and Environmental Geology
• /
• v.56 no.2
• /
• pp.201-215
• /
• 2023

In the stone-lined tombs from Cheongyang Rokpyeong-ri site, several stone-lined tombs corresponding to the Three Kingdoms Period, Unified Silla Period and Goryeo Dynasty were excavated. In this study, the stone properties of petrological, mineralogical and geochemical characteristics from 15 stone-lined tombs were analyzed, the rock species and occupation rate were reviewed, also the provenance area was interpreted. There are five types of rocks used as members of the tombs, including black sandstone, greywacke, slate, conglomerate and gneiss. As a result of magnetic susceptibilities, the rocks of the tombs and presumed provenance are all shown in the same range, and the similarity between the tombs and the source area is high in geochemical behavior characteristics. The stone properties of the tombs are the same as the presumed provenance rocks and is distributed within a 500m around the bedrock of the tombs in the excavation site, so it seems that self-sufficiency was possible on the site without a special procurement system. These stones are interpreted to have been constructed through some trimming without any special technique, but some stone tombs have been confirmed to used homogeneous black sandstone at the bottom of the tombs, so it is believed that there were artificial selection of stones.

• The Journal of Engineering Geology
• /
• v.33 no.3
• /
• pp.475-487
• /
• 2023

We surveyed the distribution of soil layers on Dongdo and Seodo of Dokdo and measured the physical properties of the soils. To investigate the distribution of soil layers, the soil depth was measured directly in accessible locations, and visual observations of inaccessible locations were carried out using drones and boats. Soil depths ranged from 3 to 50 cm, and most soil layers had depths of 10~20 cm. Based on these results, a map of the soil layer was drawn using 5 cm intervals for soil depth. To analyze the soil characteristics of Dokdo, soil samples were collected from 13 locations on Dongdo and 13 locations on Seodo, in consideration of various geological settings. According to the results of grain size distribution tests, sand contents were >75%, and soil from Seodo contained more gravel-sized particles than that from Dongdo. Using the unified soil classification system (USCS) and textural classification chart of the United States Department of Agriculture (USDA), most of the soil samples from Dokdo are classified as sand, and some are classified as loamy or clayey sand. In addition, well-graded loamy or clayey sands are more common in Dongdo, and poorly graded sands with gravel are more common in Seodo. These results are expected to be important for studying soil characteristics on Dokdo.

• Environmental and Resource Economics Review
• /
• v.31 no.4
• /
• pp.669-691
• /
• 2022

In this analysis, from the perspective of the business ecosystem, the economic effects of the oil and gas E&P industry were estimated. Australia, Norway, and the US, which are countries that are active in oil and gas E&P projects, and Japan and Korea, which are not, were analyzed. According to the analysis results, every country has a induced production coefficient of the oil and gas E&P industry greater than 1. Norway and the US have formed an industrial ecosystem across all industries, evenly demanding intermediate inputs for the primary, secondary, and tertiary industries. In contrast, Korea and Japan have a very large input ratio from the tertiary industry and an industrial ecosystem centered on the tertiary industry. It should be considered that the high input ratio of certain industry in business ecosystem determine the scale of the induced effect. When the business ecosystem are formed with many industries evenly, and the induced coefficient is high, it is necessary to increase the amount of final demand of the industry to make the effects of coefficient to increase.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.571-582
• /
• 2022

In this study, the raw material and tempers of bricks used in three brick tombs built in Gongju, during the Ungjin period of Baekje were investigated. The royal tomb of King Muryeong, the 6th tomb in the royal tombs, and Kyochonri brick tomb remained in Gongju and the bricks of each site had different shape and physical properties despite their similarity in raw materials. As the results of the mineralogical and microstructural analysis, the bricks of the royal tombs were made of refined raw materials, and were infrequently added crushed bricks(grogs) as a tempering material. On the other hand, thick and elongated pores of bricks from the Kyochonri brick tomb were frequently found, and the remains of plant carbonization are observed in their microstructures. Since the pores are mainly distributed in a thickness of 0.3 to 1 mm, it is estimated that bricks were produced by adding a certain size of the plant to refined soil, and grogs also were added as a tempering material. In particular, it was found that adding plants and grogs in raw materials of bricks caused thick pores or cracks in the internal structure. Since the bricks of the Kyochonri brick tomb have internal cracks and low firing temperature, the ultrasonic velocity of the bricks was lower than that of the royal tomb bricks. It means that the mechanical strength of these bricks were relatively low. Accordingly, it is estimated that the tempering materials, firing temperature, and internal structures of bricks can affect durability of the brick, and it can be thought as a difference in the manufacturing technology of brick making.

• Economic and Environmental Geology
• /
• v.55 no.6
• /
• pp.583-596
• /
• 2022

The rock surface of Bangudae petroglyphs is mainly dark brown hornfelsified shales by contact metamorphism. The surface form a weathered layer of a invariable depth, and there is a difference with mineral and chemical composition between weathered and non-weathered layers. Surface of the petroglyphs has been discolored to light brown over the face due to biological and chemical weathering. As the measuring chromaticity based on the non-weathered layer, the whiteness and yellowness increased in the weathered layer, and the color difference (ΔE) was 5.54 to 36.89 (mean 17.26). In the weathered layer of the petroglyph surface, the CaO content was reduced by about 90% compared to the non-weathered layer, and Sr also showed the same trend. In particular, the mean porosity of the non-weathered layer was 0.4%, but it was estimated as 25.0% in the weathered layer. This is interpreted as the fact that calcite reacts with water, and forms a weathered layer from the surface as it is eluted. Based on the weathering depth modeling of the petroglyphs using the penetration characteristics of X-rays, the weathering depth of rock faces was found to be 1 to 2mm. However, the area classified as 2mm or more estimated to be a maximum of 3 to 4mm, considering the weathering depth around the petroglyphs surface.

• Journal of the Korean earth science society
• /
• v.43 no.6
• /
• pp.749-761
• /
• 2022

As the number of National and UNESCO Global Geoparks has increased, awareness of geological heritage and local government interests have also increased. In this study, data from the geological heritage sites in the Ulsan area were summarized, a practical use plan for geological heritage was prepared based on the assessment results, and the expected effects were also presented. The value for 33 of 112 geological heritage sites identified through literature surveys was evaluated. In terms of the geological heritage types in Ulsan, there were two geological, one geomorphological, and thirty mixed-heritage sites. In the context of the geological heritage of Ulsan, rivers and coastal topography were found to be dominant, and various geomorphological and geological features, such as fossils, folds, faults, shear zones, minerals, and ore deposits are included. Based on the assessment results, there were three, eighteen, nine, and three sites in Classes I, II, III, and IV, respectively. Considering the intrinsic and subsidiary values of geological heritage, the Gangdong Coast, Jujeon Coast, Taehwagang area, Daewangam area, the Daegokri-Cheonjeonri track sites, and Mujechineup are likely to be listed as potential geosites. When the endorsement of the geopark has been promoted alongside these geosites, it can contribute to the sustainable preservation and maintenance of the geosites, satisfy the demand for science education through geo-education, and support the sustainable development of the local economy following the detailed standards for geopark certification in the Natural Parks Act. This is expected to increase the brand value of Ulsan Metropolitan City.