• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.216-217
• /
• 2000

상자성을 갖는 분자에 대한 분광학 연구에서는 제만(Zeeman) 효과로 생기는 이색성을 이용한 magnetic rotation spectroscopy (MRS)가 널리 사용되고 있다.$^{(1)}$ MRS가 일반적인 흡수 분광법에 비해 더 민감한 측정을 할 수 있기는 하지만 사용하는 편광기의 extinction ratio에 의해 감도가 한정된다. MRS의 감도를 높이는 방법으로는 광경로를 길게 만드는 것을 고려할 수 있다. 일반적으로 공진기 광자감쇠 분광학(Cavity Ring-Down Spectroscopy, CRDS)은$^{(2)}$ 높은 반사율을 갖는 거울을 사용해서 수 km 이상의 광 경로를 만들기 때문에 감도가 높다. (중략)

• Journal of Sensor Science and Technology
• /
• v.12 no.4
• /
• pp.149-155
• /
• 2003

A PMOSFET photodetector for highly-sensitive active pixel sensor(APS) is presented. This sensor uses 5V power supply and has been designed and fabricated using I-poly and 2-metal $1.5{\mu}m$ CMOS technology. The feature of a PMOSFET photodetector is that the polysilicon gate of the PMOSFET was connected to n-well, in order to increase the photo sensitivity. The designed MOS photodetector has similar $I_{DS}-V_{DS}$ characteristics with a standard MOSFET. One dimensional image sensor with 16 pixels based on the PMOSFET photodetector has also been designed and fabricated. Unit pixel of the designed sensor consists of a PMOSFET photodetector and 4 NMOSFETs. Unit pixel area is $86{\mu}m{\times}90.5{\mu}m$ and its fill factor is about 12%.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.2
• /
• pp.3-7
• /
• 2000

This paper is on the sensitivity characteristics of a concentric composite mandrel type fiber optic acoustic sensor with inclusion of an air cavity With the finite element method, we have analyzed sensitivity variation of the sensor in relation to its geometrical factors such as thickness of the air cavity, thickness of the foaming layer, and the ratio of inner diameter/outer diameter of the mandrel. Results of the analysis suggest a thicker air cavity, a thinner foaming layer, and a smaller ratio of the inner diameter/outer diameter of the mandrel to be desirable for higher sensitivity. The sensor structure designed with the above rules provides the sensitivity of about 0.8dB higher than that of a normal concentric composite mandrel sensor without the inherent air cavity.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.250-253
• /
• 1997

The effect of dispersion in optical transmission system changes according to chirp and SPM. Chirp depends on the modulation condition of an external modulator. SPM is proportional to signal power. In this paper, we analyzed the pulse broadening due to SPM and chirp in the system with dispersion by using Split Step Fourier Method and calculated the optimum chirp parameter for 400 km transmission system. Experimental results are presented also.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.141-148
• /
• 2019

Electronic substrates used in a mobile device is composed of various materials, and when the temperature is changed during manufacturing or operating, thermal deformation and stress concentration occur due to the difference in thermal expansion coefficient of each material. The shadow moiré technique is a non-contact optical method that measures shape or out-of-plane displacement over the entire area, but it is necessary to overcome the Talbot effect for high sensitivity applications. In this paper, LED light sources of various wavelengths was used to overcome the Talbot effect caused in the shadow moiré technique. By using the phase shift method, an experimental method to retain the measurement sensitivity within 10 ㎛/fringe was proposed and evaluated, and this method is applied to the thermal deformation measurement of the mobile electronic substrate. In the case of using white light, there were several areas that could not be measured due to the Talbot effect, but in the case of using blue LED light, it was shown that a precise moiré pattern with a sensitivity of 6.25 ㎛/fringe could be obtained in most areas.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1999.10a
• /
• pp.122-123
• /
• 1999

• The Optical Journal
• /
• s.104
• /
• pp.70-74
• /
• 2006

일반적으로 광 간섭 계측은 비접촉, 고감도, 면계측, 내전자(耐電磁) 노이즈 등 다른 계측방법에는 보이지 않는 우수한 장점을 가지고 있는 반면, 공기 흔들림이나 외부 진동 등의 외란에 약하여 광학 조정이 번거로우며 측정 범위가 좁다는 문제점도 있어, 아직까지는 산업적으로 충분히 보급되고 있지 않은 것이 현실이다. 여기서는 옵토 메카트로닉스 기술로서의 광 간섭 계측 기술이 상기 문제점을 극복하면서, 앞으로 어떻게 발전해 나갈 것인 지를 예측하여 기술 로드맵의 작성을 시도하였다. 기술 로드맵은 반도체 산업에서는 본격적인 것으로 정평이 나있지만, 광 간섭 계측 기술에 대한 것은 거의 없다. 따라서, 여기서 채택한 기술과 그 미래에 대해서는 필자의 경험과 주관이 상당히 많이 개입되어 있음을 미리 말해 둔다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.102-103
• /
• 2003

광통신 분야에서 장파장 p-i-n 광 검출기는. 현재와 미래의 양자 회로 설계나 통신, 측정 시스템에 핵심 부품으로 인정 받아왔다. 특히, 소자의 측면에서 입사되어 오는 광 신호를 검출하여 전기신호로 바꾸어주는 구조의 검출기는 빠른 속도로 신호를 처리하면서도 높은 감도를 가질 수 있어 큰 관심의 대상이 되어 왔다. 그러나 이와 같은 훌륭한 성능에도 불구하고, 소자 제작의 어려움과 낮은 신뢰성 등은 소자의 유용성에 의심을 가지게 하는 역할을 하였다. (중략)

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.60-67
• /
• 2011

Visible light communication system transmits data by controlling light emission of LED and receives data through photo detecter, which is considered as one of strong candidates of next generation wireless communication systems. The transmission capacity of visible light communication system depends on light intensity emitted from LED, sensitivity of PD, distance between transmitter and receiver, angle of incidence at the receiver. In particular, the receiver's vertical and horizontal movement changes distance between transmitter and receiver and angle of incidence, which may degrades transmission capacity of system. In this paper, we propose an estimation algorithm of receiver's position and angle based on tracking of received light intensity for indoor visible light communication systems. The performance evaluation of proposed algorithm confirms that the estimation algorithm of receiver's position and angle is quite important for visible light communication system to improve its transmission capacity.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.108-113
• /
• 1993

In this paper, we study the photorefractive properties of Fe indiffused $LiNbO_3$ waveguides. Comparing the photorefractive properties of $Fe:LiNbO_3$ with those of $LiNbO_3$, we confirm the increase of the diffraction efficiency and the sensitivity by Fe doping. Also for the photorefractive properties of $Fe:LiNbO_3$ waveguides with different ambient gases, the diffaction efficiency and the sensitivity of $Fe:LiNbO_3$ indifused in pure argon gases are the highest and its decay time is the shortest. Therefore, it is recommended that pure argon gases be used in Fe indiffusion process for good optical switches with photorefractive effect.