• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.294-294
• /
• 2023

보나 댐에 설치된 배수관이나 지하에 매설된 상하수도관과 같이 물을 운반하기 위한 관로 뿐만 아니라 유류를 운송하는 관, LPG와 같은 기체를 운송하는 관처럼 유체를 운송할 때 다양한 관로를 사용한다. 그 중 사용범위나 제작에 대한 용이성 등에 의해서 원형관이 주로 사용된다. 따라서 위와 같은 원형관 내의 관수로 흐름분포에 대한 연구는 아주 중요하며 필요하다. 원형관 내 흐름분포는 관에 연결된 펌프 혹은 수조나 저수지의 수위에 의한 관내 압력에 의해 지배되어지며, 관 내부 표면의 거칠기나 관의 꺾인 정도 등 다양한 요인에 영향을 받는다. 본 연구에서는 일반적인 실험결과를 도출하기 위하여 직선의 원형관을 대상으로 실험과 수치모의를 동시에 수행한다. 실험은 높이 3m, 길이 4.5m, 폭 1.5m 수조의 바닥에서부터 0.45m 위에 위치한 1.8m 길이의 아크릴 재질의 원형관이 설치된 수조에서 진행되었으며, 수치모의 또한 동일한 규모에서 수행되었다. 수조의 수위를 변화시켜 여러가지 레이놀즈 수에 따른 관 내 흐름의 변화에 대하여 분석하는 것이 목적이며, 실험결과와 수치모의 계산결과 간의 비교검증을 통해 분석한다. 이 연구에서는 난류의 영향을 RANS(Reynolds-averaged Navier-Stokes)와 LES(large eddy simulation)을 혼합한 형태인 Hybrid RANS/LES 모형 중 하나인 DES(detacged-eddy simulation)기법을 이용하여 해석함으로써, 빠른 유속으로 인한 관 내의 강한 와(eddy)에 대한 효과를 예측하는데 한계가 있는 RANS 모형과 벽면근처에서의 흐름 해석을 위해 굉장히 높은 격자해상도가 요구되어 계산적 비용 측면에서 효율이 떨어지는 LES 모형의 한계를 극복하고자 한다. DES 모형은 벽에서 떨어진 와에 대하여 LES로 직접해석하고, 벽 근처에서의 흐름에 대해선 난류모형을 통해 모델링함으로써 벽 근처 계산격자와 계산량을 줄이면서 LES와 비슷한 결과를 얻을 수 있다. 실험결과와 수치모의 계산결과 사이의 비교검증을 통하여 관 내 흐름에 대한 수치모의의 적용성을 평가하고 실험에서 측정하기 어려운 난류강도와 압력변동의 상세한 특성을 수치모의를 통해 분석함으로서 관 내 흐름특성에 대하여 자세히 분석하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.7
• /
• pp.675-684
• /
• 2020

To prevent safety accidents caused by aging pipe infrastructure and to maintain water quality, construction projects for water and sewage pipes are actively conducted across Korea. This study analyzed the criteria situations, site survey details, and regulation revisions related to the calculation of construction cost standards for pipe laying and joining work. The analysis showed that the major causes for revision are the unclear construction scope, limitations in implementing some pipe materials due to installation facility types, workforce focused on ordinary labor, limitations of manual laying work, and the lack of tool hire cost and machine expense-calculation criteria. Field studies were conducted to categorize the pipes according to their features, in addition to identifying the use of lifting heavy equipment and light equipment. In addition, excavation and testing work conducted in connection to pipe laying, as well as the use of skilled labor, were investigated. The current study clarified the work scope through new common items, provides an organization based on the pipe material, adjusted the workforce ratio to focus more on skilled labor, and developed grounds for calculating machine expenses. These revisions were estimated to save approximately 1.28% of the construction costs in each project according to an analysis of the construction cost impact study. truction costs in each project, according to an analysis of construction cost impact study.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.1
• /
• pp.38-46
• /
• 1982

The research was carried out to determine the division of juvenile and adult wood from the pattern of variables of wood quality indicators, to investigate general low of the size of juwenile wood and to study the characteristics of juvenile and adult wood. For this study some trees of Pinus koraiensis were selected and several wood quality indicators such as annual ring width. late wood percentage, tracheid length tracheid diameter, wall thicknes, and microfibril angles were measured. The results of this study were summaried as follows. 1) Juvenile and adult wood can be divided into radial variations of wood quality indicators. In this study juvenile wood might be classified as a large fluctuated region of radial wood quality variations in the nearest part to pith. 2) Juvenile wood was indicated as a part of nearly cylinderical shape, averaging 6-11cm in radius, near pith. 3) Number of rings from pith of juvenile wood was about 12-20 and was nearly constant in uniform growth trees among the forest stands. 4) Usually adult wood was formed within the about 5-10m above ground.

• Conservation Science in Museum
• /
• v.23
• /
• pp.91-108
• /
• 2020

This study conducted non-destructive analyses of the material features of seven gilt-bronze crowns of Baekje Kingdom that were excavated in the Cheonan, Gongju, Seosan, Iksan, Naju, and Hapcheon areas. A typical Baekje gilt-bronze crown has a conical inner crown and an outer crown embellished with vertical ornaments on the front and the back, a tube topped with a hemispherical ornament, and other ornamentation. Diverse designs (e.g., dragon, bonghwang, flowers, and plants) were applied using a range of techniques, including repoussé, chasing, openwork, and engraving. Formal features differ among the crowns according to their period of production and site of excavation. The substrate metal of the crowns is either pure copper or mixed copper with a small amount of lead. The crowns were amalgam-plated on the surface with pure gold or gold with a small amount of silver. The crown from Okjeon Tomb No. 23 in Hapcheon in the ancient Gaya region has a high silver content, which appears to be a regional feature. In addition, this crown from Okjeon Tomb No. 23, which can be categorized as Baekje-style gilt-bronze crown, seems to be plated at most three times, while the gilt-bronze crowns found within Baekje Kingdom territory were plated once or twice.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.245-251
• /
• 2019

In this paper, conservation treatment processes for the wooden furniture in the Presidential Archives are introduced. Conservation treatment strategies for modern wooden cultural heritage have been increasingly studied. The current study uses materials similar to those used by the existing conservation treatment method. Material analysis showed that the chair(Lee136-2) and desk(Yun37) in the Presidential Archives are made of Dipterocarpaceae, and both are coated with two layers of varnishing. FT-IR analysis showed that the varnish has a similar spectrum to that of a nitrocellulose-based lacquer(Lee136-2) and top coat(Yun37) and confirmed that a synthetic material was used. Pollutants had adhered to the surface of the wooden furniture and it was also in structurally unstable condition because of cracks and damage to the varnish and wood. Therefore, a conservation treatment was carried out to restore the damaged areas to their original appearance using similar kinds of materials, based on data obtained by materials analysis.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.4
• /
• pp.62-71
• /
• 1991

New Zealand 남섬의 Canterbury 지방과 Nelson 지방의 붕소(硼素) 결핍지역(缺乏地域)과 붕소(硼素) 시비지역(施肥地域)에 생육(生育)하고 있는 라디아타소나무의 해부학적(解剖學的) 차이(差異)를 조사(調査)하였다. 즉 가도관(假導官)의 길이, 방사방향(放射方向)의 가도관(假導官) 내경(內徑), 방사방향(放射方向) 세포벽(細胞璧)의 두께를 조(早), 만재별(晩材別)로 측정(測定)하였고 광학현미경(光學顯微鏡) 및 전자현미경(電子顯微鐘) 특성(特性)을 관찰(觀察) 하였다. 만재(晩材)에서는 가도관(假導官)의 길이에 붕소(硼素) 결핍지역(缺乏地域) 간(間)에 유의차(有意差)가 인정(認定)되었으나, 조재(早材)에서의 가도관(假導官)의 길이 및 가도관(假導官)의 내경(內徑) 및 가도관벽(假導官璧)의 두께는 조(早), 만재(晩材) 모두에서 유의차(有意差)가 인정(認定)되지 않았다. 그러나 붕소(硼素) 결핍지역(缺乏地域)에서 생육(生育)된 리디아타소마누에서는 세포벽(細胞璧)의 박리현상(剝離現象) 및 목질화(木質化)가 덜된 부분(部分)에 많이 관찰(觀察)되었고, 찌그러진 세포(細胞)의 다수출현(多數出現) 및 세포(細胞)의 크기가 불균일(不均一)한 것이 많이 출현(出現)되었으며 세포벽(細胞璧)의 간층(間層)이 넓었음이 관찰(觀察)되었다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.87-95
• /
• 2005

Laser sealing/cutting technique, one of the 4 core technologies to manufacture self-luminous glass tubes (SLGTs) has been developed. Through the analysis of commercial products it is found that Pyrex Is used for SLGTs. A CO2 laser, which is commonly used for glass work was used for the study The factors affecting the sealing/cutting were laser intensity, duration. Irradiation method, and pressure inside the tube. The whole Process is composed of 2 stages. In the first stage. both ends of the tubes are sealed while tritium is insected in the tubes. And the tritium sealed tubes are cut in the desired size in the second stage. Defocused beam was used for seal ing and focused beam was used for cutting. After the sealing/cutting, the tubes were heat treated to prevent fracture due to the residual heat stress.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.477-480
• /
• 2011

The stress analyses of the 'U'-shaped multi-ply reinforced gimbal bellows under high pressure and rotational displacement loadings are performed at the room and cryogenic temperatures. The bellows are used for the Lox pipe line which connects the combustion chamber with the turbopump of a liquid rocket engine. The distributions of the stress, the strains and the contact pressures are obtained from the finite element analysis considering the geometric non-linearities of the contacts between the plies and the material one of the isotropic plasticity. Those are compared with the stress results from EJMA (Expansion Joint Manufacturing Association) standard. Also, the effects of the operating temperature and the reinforcing ring on the stresses are investigated.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.91-97
• /
• 2012

The structural analyses and experimental results for the bellows of a gas-generator liquid oxygen shut-off valve were presented. The bellows experiences axial compression and external high pressure loadings at cryogenic temperatures. The analyses were performed using EJMA (Expansion Joint Manufacturing Association) standard and the commercial FE (finite element) analysis program, Abaqus v6.9, at room and cryogenic temperatures. The spring modulus, the induced stress and the expected fatigue life of the bellows were compared respectively. The effects by the contact and the material plasticity on the FE analysis results were also analyzed. Also, FE analyses related to a burst test were presented.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.19-21
• /
• 2003

일반적으로 PMDC모터에 사용되는 자석은 가격과 재질에 따라서 여러 가지로 분류할 수 있다. 그러나 착자방법에는 등방향과 방사형 착자로 나눌 수 있고 용도에 따라서 다극으로 착자할 수 있다. 하지만 그 기본적인 구조에는 원통형, 판형, 육면체형으로 분류할 수 있는데 구형, 반구형 또는 구형 shell에 관한한 아직까지 소개된 문헌이 빈약하다. 본 논문에서는 슬롯리스 구형직류모터에 사용될 반구형 shell형태의 영구자석의 착자기 구조와 착자방법에 대한 가능성을 찾아보고 이론적으로 증명하고자 한다.