• Annual Conference of KIPS
• /
• 2017.04a
• /
• pp.645-648
• /
• 2017

실외 환경에서는 일반적으로 드론의 위치 측정 또는 위치 제어를 위해서 위성항법장치를 사용한다. 위성항법장치는 실내 환경에서 신호 수신이 어렵기 때문에 실내에서의 위치 측정과 항법을 수행하기 위해서 많은 연구가 이루어진다. 기존의 연구들은 드론에 추가적인 센서를 요구하거나 사전 실내 환경 설정을 가정한다. 그러나 추가적인 장치나 환경 설정 없이 드론의 관성항법장치만으로도 위치 측정이 가능하다. 관성항법장치는 가속도를 적분하여 이동한 거리를 파악하기 때문에 시간이 지날수록 오차가 누적되는 문제점이 있으며 비행 중 기체 진동으로 인한 측정 오차로 정확한 이동거리를 산출해내는 것이 어렵다. 따라서 본 논문에서는 이러한 문제들을 드론의 특성을 반영하여 관성항법장치로부터 발생한 오차를 줄여 보다 정확한 드론의 실내 위치측정 방법을 제안한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.455-458
• /
• 2006

관성항법장치는 관성항법장치를 구성하는 관성센서인 가속도계 및 자이로의 오차요소에 의해 수평축 항법오차는 슐러주기를 가지고 서서히 증가하는 반면에 수직축 오차는 기하급수적으로 증가하는 특성을 가지고 있다. 그러므로 관성항법장치를 장시간 운용하는 경우에는 비관성 보조센서를 이용하여 관성항법장치의 수직축 항법오차에 대한 보정을 반드시 수행하여야 한다. 관성항법장치의 수직축 항법오차를 보정하기 위한 비관성 보조센서의 일종인 기압고도계는 계측된 대기압과 모델링 된 대기압을 비교하여 항체의 고도를 측정하는 방법을 이용하기 때문에 항체의 자세변화 등에 매우 민감하고 대기압 측정오차에 의해 매우 큰 진폭의 잡음 및 바이어스가 존재한다. 본 논문에서는 시뮬레이션 및 시험을 통하여 기압 고도계의 잡음 및 바이어스 오차 성분에 의한 baro-inertial 고도루프의 성능분석 결과를 제시하고 기압고도계 잡음에 둔감한 INS/기압고도계 칼만필터의 설계 결과를 제시한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.227-229
• /
• 2016

Drone is demanding more than detaile hardware and software systems because Drone have characteristic flying. If Drone is a plane crash. they have risk of personal injury and property damage. now Drone control core system is preventing a plane crash and flight unsafe flying. The key is to help flying to convert for various external environment. This research prevent a plane crash that system planning to treat six-senser-figure doubly is IMU trouble or a trouble caused by a passing parameters and IMU install to help stability in flying.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1967-1968
• /
• 2006

본 논문에서는 비전과 관성센서를 이용하여 2바퀴를 가지는 이동장치를 개발하였고, 이에 대한 역학 모델을 제안한다. 본 이동장치에서 바디부분은 바퀴의 축에 직접 연결되어 있으므로 물리적인 결속이 필요한 기존의 센서로는 진자의 기울어짐을 알 수 없다. 따라서 바디의 기울어짐을 측정하기 위하여 관성센서를 사용하였다. 보다 안정된 주행을 위해 바닥의 기울어짐을 측정하기 위해 비전을 이용하였다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.270-270
• /
• 2019

Although the Inertial Measurement Unit is applied to a variety of applications such as ships, submarines, and aircrafts, it is mainly used in the attitude measurement area. But since such equipment is expensive, it has been used only in special fields. In this study, the ship's seaworthiness is verified by measuring the speed, direction, gravity, and acceleration of the ship in real time using a low-cost Inertial Measurement Unit. A research method for estimating fIuid force coefficients was devised. Therefore, this study measured ship motion factors at sea, processed and analyzed the measured data, and evaluated the overall safety of the ship and estimated the resistance and steering performance of the ship.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.5
• /
• pp.502-510
• /
• 2009

Laser Inertial Navigation System(LINS) consists of Ring Laser Gyroscopes(RLG) and accelerometers. RLG has a lock-in region in which there is zero output for input angular rates less than 0.1deg/sec. The lock-in region is generated by the imperfect mirrors in RLG. To avoid the lock-in region, sinusoidal motion which is called dither motion is applied on RLG. Therefore without the fault in LINS, the dither motion must be measured by RLG/accelerometer. In this paper, we propose the method to detect the fault of LINS through checking out whether or not the dither motion is always measured by RLG/accelerometer using the Fast Fourier Transformation(FFT) on the real time. The feasibility of the fault detection method proposed in this paper is verified through the stationary and van test.

• Journal of Navigation and Port Research
• /
• v.35 no.10
• /
• pp.785-791
• /
• 2011

This paper describes the evaluation and selection of MEMS(Micro-Elect Mechanical System) based inertial sensor to fit to implement the Inertial Measurement Unit(IMU) for a small-sized vessel at sea. At first, the error model and the noise model of the inertial sensors are defined with Euler's equations and then, the inertial sensor evaluation is carried out with Allan Variance techniques and Monte Carlo simulation. As evaluation results for the five sensors, ADIS16405, SAR10Z, SAR100Grade100, LIS344ALH and ADXL103, the combination of gyroscope and accelerometer of ADIS16405 is shown minimum error having around 160 m/s standard deviation of velocity error and around 35 km standard deviation of position error after 600 seconds. Thus, we select the ADIS16405 inertial sensor as a MEMS-based inertial sensor to implement IMU and, the error reducing method is also considered with the search for reference papers.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.1
• /
• pp.41-48
• /
• 2019

This paper deals with a method of aligning an aircraft fuselage and an inertial navigation sensor using three-dimensional coordinates obtained by an optical method. In order to verify the feasibility, we introduce the method to accurately align the coordinate system of the inertial navigation sensor and the aircraft reference coordinate system. It is verified through simulation that reflects the error level of the measuring device. In addition, optimization method based alignment algorithm is proposed for connection between optical sensor and inertial navigation sensor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.9
• /
• pp.617-625
• /
• 2022

This study investigates the use of movable calibration target for gyroscopic and accelerometer bias compensation of inertial measurement units for firing lane alignment. Calibration source is detected with the help of vision sensor and its information in fused with other sensors on launcher for error correction. An algorithm is proposed and tested in simulation. It has been shown that it is possible to compensate sensor biases in firing launcher in few seconds by accurately estimating the location of calibration target in inertial frame of reference.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.8
• /
• pp.796-803
• /
• 2011

It is called self-alignment or initial alignment that INS(Inertial Navigation System) is aligned using the measurements from the inertial sensors as an accelerometer and a gyroscope and the inserted reference navigation information in the stop state. The main purpose of self-alignment is to obtain the initial attitude of INS. The accuracy of self-alignment is determined by the performance grade of the used inertial sensors, especially horizontal attitude accuracy by the horizontal accelerometer and vertical attitude accuracy by the E-axis gyroscope. Therefore the uncertain errors in the inertial sensors cause the performance of self-alignment to degrade. In this paper, we analyze theoretically and through a simulation how the errors of inertial sensors in the temperature stabilizing state, one of the uncertain errors, affect the accuracy of self-alignment.